*Specifi cations are subject to changes without notice.
User Operation Guide
Package Contents
1. Main unit
2. USB cable
3. Audio cable
Output power : 10W
Woofer : 3”
Impedance : 4ohm
Input sensitivity : 600±10% mV
Distortion : ≤ 1%
Signal/Noise ratio : ≥ 50dB
Frequency response : 300~20K Hz
Power cable : USB Plug 1.2m, black
Input cable : 3.5 Plug, 1.3m black
Battery : 3 x AA 1.5V
Playing time : 4-5 hours
Size of product W*D*H : 590 x 130 x 127 mm
Weight : 1.95 kgs
*Specifi cations are subject to changes without notice.
DESCRIPTION
SPECIFICATION
INSTALLATION GUIDE
1. Power the speaker by using 3 x AA batteries or connecting a
USB cable from the wall plug to the speaker
2. Insert Input signal (3.5mm audio jack) into the input port
and the other end with output port of your Audio/Video
system
3. Adjust rvolume level to your satisfaction level and enjoy.
4. Rotate all volume to its minimum levels before powering
OFF
5. Gentle reminder:please do not turn volume to its maximum
so as to prevent damages to hearing
Important notes:
Please remove the batteries when powering the speaker through USB
The ABtUS SPS-A005A is a simple battery operated Powered Speaker
with an output power at 10 watts that is designed to deliver quality audio
amplifi cation. It is an ideal back up solution for classroom and small
meeting room installations.