Astonica 50105624 User manual

Type
User manual

Astonica 50105624 is a versatile and stylish chaise lounge perfect for relaxation. With its sturdy construction and comfortable cushioning, it's built to last and provide years of enjoyment. The adjustable backrest allows you to customize your comfort level, and the included lounge chair cushion adds extra support and coziness. Whether you're lounging by the pool, reading in the sunroom, or simply relaxing in your backyard, the Astonica 50105624 is the perfect choice for ultimate relaxation.

Astonica 50105624 is a versatile and stylish chaise lounge perfect for relaxation. With its sturdy construction and comfortable cushioning, it's built to last and provide years of enjoyment. The adjustable backrest allows you to customize your comfort level, and the included lounge chair cushion adds extra support and coziness. Whether you're lounging by the pool, reading in the sunroom, or simply relaxing in your backyard, the Astonica 50105624 is the perfect choice for ultimate relaxation.

180107rev1
Model No. 50105624
Jakarta Cushion Chaise Lounge
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
Limited Warranty
World Factory, Inc.
®
Products for Home Use
World Factory, Inc.
®
(Seller) warrants to the original Buyer only, that each Astonica
®
Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE
SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY
FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc.
®
authorized service
center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR
LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
®
Made in China
©2006 World Factory, Inc.
Distributed by:
World Factory, Inc.
Coppell, TX 75019
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
PARTS LIST
PART # DESCRIPTION QUANTITY
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
A Seat Front 1
B Seat Back 1
C Back Rest 1
D Lounge Arm (right) 1
E Lounge Arm (left) 1
F Short Bolt 8
G Long Bolt 2
H Hex Nut 2
J Metal Washer 12
K Plastic Washer 2
L Plastic Bolt Cap 10
M Plastic Nut Cap 2
N Hex Key 1
P Lounge Chair Cushion 1
Figure 1
Attach Seat Front and Back
1.(SEE FIGURE 1) Select a location with
a smooth non-scratching surface.
2.Insert seat back (B) into seat front (A).
Parts Detail
A
B
C
D
E
F
G
H
J
K
L
M
N
1
ASSEMBLY INSTRUCTIONS
NOTE: This product is intended for residential, non-commercial use.
P
B
A
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
CAUTION: Do not over tighten the
mounting hardware.
Attach Right Lounge Arm
1.(SEE FIGURE 2) Place seat front and
back combination (A, B) on top of right
lounge arm (D).
2.Align seat mounting tabs with lounge
arm mounting holes.
3.(SEE FIGURE 3) Attach front of seat to
lounge arm using two short bolts (F)
and two metal washers (J). See Detail A.
4.Attach back of seat to lounge arm
using two short bolts (F) and two metal
washers (J). See Detail B.
Attach Left Lounge Arm
1.(SEE FIGURE 2) Place left lounge arm (E) on top of seat front and back combination (A, B).
2.Align seat mounting tabs with lounge arm mounting holes.
3.(SEE FIGURE 3) Attach front of seat to lounge arm using two short bolts (F) and
two metal washers (J).
4.Attach back of seat to lounge arm using two short bolts (F) and two metal washers (J).
Install Plastic Bolt Caps
1.(SEE FIGURE 3) Place one plastic bolt cap (L) on ends of each short bolt (F).
D
Figure 2
A/B
Seat Mounting
Tabs
Lounge Arm
Mounting Holes
Figure 3
F
J
L
L
F
J
Lounge Arm
Mounting Holes
Seat Mounting
Tabs
Detail C
Backrest to Seat
G
H
J
K
L
M
N
Attach Backrest to Seat
1.(SEE FIGURE 4) Place lounge in the upright position .
2.Attach backrest (C) to seat front and back combination (A, B).
3 Place one metal washer (J) onto long bolt (G). Slide bolt through mounting hole
on seat back combination. See Detail C.
4.Place one plastic washer (K) onto bolt (G), then slide bolt through mounting hole of backrest (C).
5.Place one metal washer (J) onto bolt and secure to backrest using hex nut (H).
6.Tighten hex nut (H) using hex wrench (N).
Note: Tighten Nut (H) snug, then loosen 1/4 turn or more to allow free movement of Backrest (C).
7.Install plastic nut cap (M) onto hex nut (H).
Attach Lounge Chair Cushion
1.(SEE FIGURE 4) Attach lounge chair cushion (P) to lounge using the attached velcro straps.
Figure 4
C
Seat Back
Combination
Backrest
J
D
F
J
L
Detail A,
Front of Seat
L
F
J
L
F
J
Detail B,
Back of Seat
F
J
L
L
F
J
2 places
E
E
D
2
3
G
J
L
K J
H
M
P
A/B
  • Page 1 1
  • Page 2 2
  • Page 3 3

Astonica 50105624 User manual

Type
User manual

Astonica 50105624 is a versatile and stylish chaise lounge perfect for relaxation. With its sturdy construction and comfortable cushioning, it's built to last and provide years of enjoyment. The adjustable backrest allows you to customize your comfort level, and the included lounge chair cushion adds extra support and coziness. Whether you're lounging by the pool, reading in the sunroom, or simply relaxing in your backyard, the Astonica 50105624 is the perfect choice for ultimate relaxation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI