American Standard 6501.010, 6501.010.021, 6506.011, Washbrook Urinal 6501.010 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard 6501.010 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
M87
© 2008 AS America Inc.
WASHBROOK™
URINAL
VITREOUS CHINA
WASHBROOK™ 1.0 GPF WASHOUT URINAL
Vitreous china
Low-consumption (3.8 Lpf/1.0 gpf)
Flushing rim
Elongated 14" rim from nished wall
Washout ush action
Extended sides for privacy
3/4" inlet spud
Outlet connection threaded 2" inside (NPTF)
2 wall hangers
Fixture only
Meets ANSI ush requirements at 1.0 GPF
6501.010 Top spud
6506.011 Back spud
Nominal Dimensions:
355 x 470 x 692mm
(14" x 18-1/2" x 27-1/4")
Recommended working pressure – between
20 psi at valve when ushing and 80 psi static
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
Revised 11/08
To Be Specied:
Color: White Bone Silver
Linen Black
Flush Valve:
American Standard Selectronic
#6063.101.002
DC Power (Top Spud)
American Standard Selectronic
#6063.310.007
DC Power (Back Spud)
American Standard Selectronic
#6062.310.007
AC Power (Back Spud)
American Standard Selectronic
#6061.310.007
Multi AC Power (Back Spud)
Stainless Steel Strainer: 047068-0070A
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
BARRIER FREE
M88
© 2008 AS America Inc.
WASHBROOK™
URINAL
VITREOUS CHINA
NOTES:
FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND
FACILITIES - CHECK LOCAL CODES.
When installed so top of rim is 387mm (15-1/4") from finished floor.
6501.010 TOP SPUD
6506.011 BACK SPUD
BARRIER FREE
13mm
(1/2)
102mm
(4)
GASKET
2" N.P.T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
FINISHED WALL
13mm
(1/2)
121mm
(4-3/4)
3/4
SPUD
3/4 S.P.S. OR 3/4 C.W.T.
SUPPLY TO FLUSH VALVE
438mm
(17-1/4)
692mm
(27-1/4)
REF.
457mm
(18)
292mm
(11-1/2)
89mm
(3-1/2)
102mm
(4)
470mm
(18-1/2)
343mm
(13-1/2)
C/L OF
OUTLET
K2 HANGERS
8mm X 25mm
(5/16 X 1)
SLOT
64mm
(2-1/2)
235mm
(9-1/4)
355mm
(14)
2" N.P.T.
FEMALE OUTLET
CONNECTION
13mm
(1/2)
FINISHED FLOOR
FINISHED
WALL
387mm
(15-1/4) MAX
610mm
(24)
OPTIONAL
13mm
(1/2)
102mm
(4)
GASKET
2" N.P.T.
INSIDE THREADS
DETAIL OF OUTLET CONNECTION
FINISHED WALL
13mm
(1/2)
3/4
SPUD
438mm
(17-1/4)
692mm
(27-1/4)
REF.
457mm
(18)
89mm
(3-1/2)
102mm
(4)
470mm
(18-1/2)
343mm
(13-1/2)
C/L OF
OUTLET
K2 HANGERS
8mm X 25mm
(5/16 X 1)
SLOT
51mm
(2)
51mm
(2)
235mm
(9-1/4)
355mm
(14)
2" N.P.T.
FEMALE OUTLET
CONNECTION
13mm
(1/2)
FINISHED FLOOR
FINISHED
WALL
387mm
(15-1/4) MAX
610mm
(24)
OPTIONAL
Revised 11/08
/