American Standard 6605.027 User manual

Type
User manual

This manual is also suitable for

M83
© 2008 AS America Inc.
To Be Specied:
Color: White Bone Silver Linen
Flush Valve:
American Standard Selectronic
#6063.101.002
DC Power (Top Spud)
American Standard Selectronic
#6063.310.007
DC Power (Back Spud)
American Standard Selectronic
#6062.310.007
AC Power (Back Spud)
American Standard Selectronic
#6061.310.007
Multi AC Power (Back Spud)
LYNBROOK™
URINAL
VITREOUS CHINA
LYNBROOK™ 1.0 GPF BLOWOUT URINAL
Vitreous china
Low consumption (3.8 Lpf/1.0 gpf)
Flushing rim
Blowout ush action
Privacy shields
1-1/4" inlet spud
Outlet connection threaded 2" inside (NPTF)
2 wall hangers
Fixture only
Meets ASME ush requirements at 1.0 GPF
6601.012 Top spud
6605.027 Back spud
Nominal Dimensions:
356 x 470 x 730mm
(14" x 18-1/2" x 28-3/4")
Recommended working pressure – between
20 psi at valve when ushing and 80 psi static
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
Revised 11/08
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
BARRIER FREE
M84
© 2008 AS America Inc.
NN

NN

("4,&5
/15
*/4*%&5)3&"%4
%&5"*-0'065-&5$0//&$5*0/
'*/*4)&%8"--
NN

NN

/1503$85
4611-:50'-64)7"-7&
416%
NN

NN

,)"/(&34
NN9NN
9
4-05
NN

NN

NN

NN

NN

/15'&."-&
065-&5$0//&$5*0/
4&&%&5"*-
NN

NN

'*/*4)&%
8"--
NN

NN

$-0'
065-&5
NN

NN
."9
NN

015*0/"-50
'*/*4)&%'-003
NN

NN

("4,&5
/15
*/4*%&5)3&"%4
%&5"*-0'065-&5$0//&$5*0/
'*/*4)&%8"--
NN

NN

NN

,)"/(&34
NN9NN
9
4-05
NN

NN

NN

NN

NN

/15'&."-&
065-&5$0//&$5*0/
4&&%&5"*-
NN

NN

'*/*4)&%
8"--
NN

$-0'
065-&5
NN

NN
."9
NN

015*0/"-50
'*/*4)&%'-003
416%
NN

LYNBROOK™
URINAL
VITREOUS CHINA
NOTES:
FLUSH VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
6601.012 TOP SPUD
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USEABLE BUILDINGS AND
FACILITIES - CHECK LOCAL CODES.
When installed so top of rim is 356mm (14") from finished floor.
6605.027 BACK SPUD
BARRIER FREE
Revised 11/08
  • Page 1 1
  • Page 2 2

American Standard 6605.027 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI