Professional 6-in-1 Cable Tester
Cable Testers
Product Information Document
#
Microprocessor-controlled
cable tester featuring 3 modes:
cable and installed cable test plus
test tone mode
#
Accepts all standard connectors:
XLR, TRS (¼ ", ⁄", TT), RCA and MIDI
#
Super-easy operation with
intuitive LED display
#
Continuity check and
intermittent contact detection
#
Phantom-power and
ground-shield check
#
Test-tone generator: 1 kHz or 440 Hz
at +4 dBu, -10 dBV or -50 dBV
#
Belt clip included
#
Operates with 2 AA size batteries
(not included)
#
High-quality components and
exceptionally rugged construction
ensure long life
#
3-Year Warranty Program*
#
Conceived and designed by
BEHRINGER Germany
*Warranty details can be found at music-group.com.
Make sure every cable in your arsenal
is in good working order with the
invaluable CABLE TESTER CT100.
This incredibly portable audio solution
is a must-have for sound engineers
and musicians alike.
Test With the Best
The CT100 accepts every type of cable you
might use in a recording or live performance
situation: XLR, mono and TRS phone
(¼ ", ⁄", TT), RCA and even MIDI. Choose from
3 modes: Cable Test, installed Cable Tester or
Tone. The CT100 can check for continuity,
intermittency, the presence of phantom power
and grounded shields. Because this handy tool
runs on two AA batteries you can carry it in
your pocket, or clip it onto your belt – and be
ready to troubleshoot at a moment's notice.
