Symmons S-5301-STN Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Symmons S-5301-STN is a shower system with a pressure-balancing mixing valve that helps to maintain a consistent water temperature, even when there are changes in water pressure. It also features a secondary integral volume control handle that allows you to adjust the water flow rate. The showerhead has a single mode and a standard flow rate of 2.5 gpm (9.5 L/min), but an optional lower flow rate restrictor is available. The polished chrome finish gives the shower system a sleek and modern look.

Symmons S-5301-STN is a shower system with a pressure-balancing mixing valve that helps to maintain a consistent water temperature, even when there are changes in water pressure. It also features a secondary integral volume control handle that allows you to adjust the water flow rate. The showerhead has a single mode and a standard flow rate of 2.5 gpm (9.5 L/min), but an optional lower flow rate restrictor is available. The polished chrome finish gives the shower system a sleek and modern look.

Options / Modifications
Append appropriate -sux to model number
-IPS
1/2 inch female IPS connections on
Symmons Temptrol
®
mixing valve
-X
Symmons Temptrol
®
mixing valve, includes
integral service stops to allow water shut-o
for service, p/n S-4001-X-BODY. (Option
only applies when ordering model S-5301)
-REV
Reverse coring in valve for back to back
installations; hot on right, cold on le,
(available with -X integral stops only)
-L/HD
Showerhead not included. (Includes
showerhead arm and ange only)
-2.0
2.0 (7.6 L/min) ow rate restrictor
-1.5
1.5 (5.7 L/min) ow rate restrictor
Standards / Certifications
ASME A112.18.1-2005/CSA B125.1-05
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations
5 years - for commercial installations
Location:
Feature Highlights
Symmons Shower System with lever handles
Symmons Temptrol
®
pressure-balancing mixing valve with
adjustable stop screw to limit handle turn
Secondary integral volume control handle
Showerhead, single mode #532SH
Showerhead arm and ange
Standard ow rate is 2.5 gpm (9.5 L/min)
Optional lower ow rate restrictor available
Polished chrome nish
Model Numbers
S-5301
Shower System with Symmons Temptrol
®
pressure-
balancing mixing valve p/n S-4001-BODY
S-5301-TRM
Trim only, mixing valve ordered separately
S-4001-BODY
Symmons Temptrol
®
mixing valve without trim
S-4001-X-BODY
Symmons Temptrol
®
mixing valve without trim.
Valve includes integral service stops to allow water
shut-o for service
Finish Options / Modifications
Append appropriate -sux to model number
-STN
Satin nickel
-BLK
Polished graphite
-
Polished chrome (standard nish)
Shower System S-5301
Specification Submittal
Museo
Print
Email
Reset Form
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184
(800) 796-6667, (781) 848-2250
Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com
Email: cu st om er se rv ic e@ sy mm on s. co m
©2010 Symmons Industries, Inc. Printed in U.S.A.
060910 ZV-849
Dimensions Museo Shower System, S-5301
Note: Dimensions subject to
change without notice
  • Page 1 1
  • Page 2 2

Symmons S-5301-STN Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Symmons S-5301-STN is a shower system with a pressure-balancing mixing valve that helps to maintain a consistent water temperature, even when there are changes in water pressure. It also features a secondary integral volume control handle that allows you to adjust the water flow rate. The showerhead has a single mode and a standard flow rate of 2.5 gpm (9.5 L/min), but an optional lower flow rate restrictor is available. The polished chrome finish gives the shower system a sleek and modern look.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI