Page is loading ...
Standards / Certifications
ASME A112.18.1-2005/CSA B125.1-05
Warranty
Limited Lifetime ■ - to the original end purchaser in
consumer installations
5 years ■ - for commercial installations
Feature Highlights
Symmons Shower Valve System with lever handles ■
Symmons Temptrol ■
®
pressure-balancing mixing valve
with adjustable stop screw to limit handle turn
Secondary integral volume control handle ■
Polished chrome nish ■
Location:
Model Numbers
S-5300
Shower Valve System with Symmons Temptrol
®
pressure-balancing mixing valve p/n S-4001-BODY
S-5300-TRM
Trim only, mixing valve ordered separately
S-4001-BODY
Symmons Temptrol
®
mixing valve without trim
S-4001-X-BODY
Symmons Temptrol
®
mixing valve without trim.
Valve includes integral service stops to allow water
shut-o for service
Finish Options / Modifications
Append appropriate -sux to model number
-STN
Satin nickel
-BLK
Polished graphite
-
Polished chrome (standard nish)
Options / Modifications
Append appropriate -sux to model number
-IPS
1/2 inch female IPS connections on
Symmons Temptrol
®
mixing valve
-X
Temptrol mixing valve includes integral
service stops to allow water shut-o for
service, p/n S-4001-X-BODY. (Option
only applies when ordering model S-5300)
-REV
Reverse coring in valve for back to back
installations; hot on right, cold on le,
(available with option -X integral stops only)
Shower Valve System S-5300
Specification Submittal
Museo
™
Print
Email
Reset Form
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250
■ Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com
■ Email: cu st om er se rv ic e@ sy mm on s. co m
©2010 Symmons Industries, Inc. Printed in U.S.A.
■ 060410 ■ ZV-847
Dimensions Museo Shower Valve System, S-5300
Note: Dimensions subject to change without notice
/