StarTech.com ET1000S40LC2 User manual

Category
Network media converters
Type
User manual

This manual is also suitable for

StarTech.com ET1000S40LC2 Gigabit Ethernet to Single Mode LC/SC Fiber Media Converter provides a reliable and high-speed connection between Ethernet and fiber optic networks. It supports 1000Base-T Ethernet and 1000Base-LX/SX fiber optic standards, enabling you to extend your network over long distances using fiber optic cabling. With a maximum transmission distance of 40 kilometers (24.8 miles) and support for auto-negotiation and full/half-duplex modes, this media converter ensures seamless integration into your existing network infrastructure.

StarTech.com ET1000S40LC2 Gigabit Ethernet to Single Mode LC/SC Fiber Media Converter provides a reliable and high-speed connection between Ethernet and fiber optic networks. It supports 1000Base-T Ethernet and 1000Base-LX/SX fiber optic standards, enabling you to extend your network over long distances using fiber optic cabling. With a maximum transmission distance of 40 kilometers (24.8 miles) and support for auto-negotiation and full/half-duplex modes, this media converter ensures seamless integration into your existing network infrastructure.

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 03/26/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1xFiberMediaConverter
• 1xUniversalPowerAdapter
• 3xPowerAdapterPlug(NA/UK/EU)
• 1xInstructionManual
System Requirements
• 1000BASE-TcompatibleEthernetnetworkequipment
• RJ45terminatedUTPCat5eorbetterEthernetcable
• 1000BASE-LX/SXcompatibleberopticnetworkequipment
• LC/SCterminatedsinglemode9/125μmberopticcable
• AvailableACelectricaloutlet
ET1000S40LC2 / ET91000SM402
Gigabit Ethernet to Single Mode LC/SC Fiber Media Converter - 40 KM
Installation
1. MakesuretheDIPswitchesaresetappropriatelyforyournetwork
conguration(seeDIPSwitchSettings“sectionfordetails).
2. Connecttheberopticnetworkcablefromacomputer/switch/
mediaconvertertotheLCconnectoronthemediaconverter.
NOTE: Whenconnectingthebercable,makesuretoconnect
theTx(transmit)terminalononeend,withtheRx(receive)
terminalontheotherend.
3. ConnectaUTPEthernetcable,fromacomputer/switchto
theRJ45jackonthemediaconverter.
4. Connectthepoweradaptertothemediaconverter.
5. Thefollowingexampleillustratestheconnectionscheme
whenconnectingfroma1000BASE-TEthernetportofa
hub/switchtoa1000BASE-SX/LXportofanotherhub/
switch,throughthebermediaconverter:
6. Thefollowingexampleillustratestheconnectionscheme
whenconnectingfroma1000BASE-TEthernetportona
hub/switchtoa1000BASE-TEthernetNetworkInterface
Card(NIC)inacomputerthroughthebermediaconverter:
Dip Switch
LED Indicators
Card Release
Thumbscrew
RJ45 Ethernet
connector
LC Duplex Fiber
connector
ET1000S40LC2 - Front View
ET91000SM402 - Front View
ET1000S40LC2 / ET91000SM402 - Rear View
DC Power connector
Ground point
(optional)
Dip Switch LED Indicators
Card Release
Thumbscrew
RJ45 Ethernet connector
SC Duplex Fiber
connector
DIP Switch Settings
Full/ Half:
EthernetDuplexmodewillbeconguredforFullorHalf.
LFP:
LinkFaultPass-throughwillpassalinkfailuretotheEthernet
side,ifalinkfailureisencounteredonthebersideandvice
versa.Otherwise,theEthernetsidewillcontinuetoshowno
linkfailures,evenifthebersidehasnolink.
(OFF=Notactive,On=Active)
Auto/Force:
Autonegotiateduplexmode,orforceFull/HalfviaDIPswitches.
FCC Compliance Statement
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycause
harmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor
televisionreception,whichcanbedeterminedbyturningtheequipmentoandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
Thismanualmaymakereferencetotrademarks,registeredtrademarks,andotherprotectednamesand/orsymbolsofthird-partycompaniesnotrelatedinanywaytoStarTech.com.Wheretheyoccur
thesereferencesareforillustrativepurposesonlyanddonotrepresentanendorsementofaproductorservicebyStarTech.com,oranendorsementoftheproduct(s)towhichthismanualappliesbythe
third-partycompanyinquestion.Regardlessofanydirectacknowledgementelsewhereinthebodyofthisdocument,StarTech.comherebyacknowledgesthatalltrademarks,registeredtrademarks,
servicemarks,andotherprotectednamesand/orsymbolscontainedinthismanualandrelateddocumentsarethepropertyoftheirrespectiveholders.
Technical Support
StarTech.comslifetimetechnicalsupportisanintegralpartofourcommitmenttoprovideindustry-leadingsolutions.Ifyoueverneedhelpwithyourproduct,visitwww.startech.com/supportandaccess
ourcomprehensiveselectionofonlinetools,documentation,anddownloads.
Forthelatestdrivers/software,pleasevisitwww.startech.com/downloads
Warranty Information
Thisproductisbackedbyatwoyearwarranty.
Inaddition,StarTech.comwarrantsitsproductsagainstdefectsinmaterialsandworkmanshipfortheperiodsnoted,followingtheinitialdateofpurchase.Duringthisperiod,theproductsmaybereturned
forrepair,orreplacementwithequivalentproductsatourdiscretion.Thewarrantycoverspartsandlaborcostsonly.StarTech.comdoesnotwarrantitsproductsfromdefectsordamagesarisingfrom
misuse,abuse,alteration,ornormalwearandtear.
Limitation of Liability
InnoeventshalltheliabilityofStarTech.comLtd.andStarTech.comUSALLP(ortheirocers,directors,employeesoragents)foranydamages(whetherdirectorindirect,special,punitive,incidental,
consequential,orotherwise),lossofprots,lossofbusiness,oranypecuniaryloss,arisingoutoforrelatedtotheuseoftheproductexceedtheactualpricepaidfortheproduct.Somestatesdonotallow
theexclusionorlimitationofincidentalorconsequentialdamages.Ifsuchlawsapply,thelimitationsorexclusionscontainedinthisstatementmaynotapplytoyou.
Specications
ET1000S40LC2 ET91000SM402
Supported
Standards
IEEE802.3ab,IEEE802.3z
Connectors
1xRJ45Ethernet
female
2xLCFiberfemale
1xDCPower
1xRJ45Ethernet
female
2xSCFiberfemale
1xDCPower
Compatible
Fiber Type
SingleMode,9/125micron
Optical
Wavelength
1310nm
Maximum
Distance
40km(24.8mi)
Duplex Modes Full/Half
Auto MDIX Yes(Ethernet)
Power Adapter
12VDC,1000mA,centerpositive,
typeMplug
Power
Consumption
<4W
Enclosure
Material
Metal
Operating
Temperature
0°C~60°C(32°F~140°F)
Storage
Temperature
-10°C~70°C(14°F~158°F)
Humidity 10%~90%RH
Dimensions
(LxWxH)
160.0mmx95.0mmx20.0mm
Weight 620g
LED Status
LED Name Status Description
PWR Power
ON Unitispowered
OFF Unitisnotpowered
RPF
Remote
PowerFailure
ON RemotePowerFail
OFF RemotePowerNormal
LNK FiberLink
ON Fiberlinkisdetected
OFF Fiberlinkisnotdetected
Blink Fiberactivity
LFP
LinkFault
Pass-through
ON LFPModeenabled
OFF LFPModedisabled
  • Page 1 1
  • Page 2 2

StarTech.com ET1000S40LC2 User manual

Category
Network media converters
Type
User manual
This manual is also suitable for

StarTech.com ET1000S40LC2 Gigabit Ethernet to Single Mode LC/SC Fiber Media Converter provides a reliable and high-speed connection between Ethernet and fiber optic networks. It supports 1000Base-T Ethernet and 1000Base-LX/SX fiber optic standards, enabling you to extend your network over long distances using fiber optic cabling. With a maximum transmission distance of 40 kilometers (24.8 miles) and support for auto-negotiation and full/half-duplex modes, this media converter ensures seamless integration into your existing network infrastructure.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI