Page is loading ...
Dimensions
Width - 400cm
Height - 320cm
Simple Assembly Instructions - Please keep for future reference 652/2719
9x4M Gazebo With 4 Side Panels
Depth - 900cm
Issue 1 - 13/09/13
Important
–
Please
read
these
instructions
fully
before
starting
assembly
For further assistance please visit http://www.argos-support.co.uk
If you need help or have damaged or missing parts, call the
Customer Helpline: Argos = 0345 6400800
Address: 489-499 Avebury Boulevard Saxon Gate West, Central Milton Keynes Bucks,MK9, 2NW
2
IMPORTANT SAFETY INSTRUCTIONS
• Check you have all the
components, fittings and tools
listed on page 2.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not Assemble or
Dismantle during strong
winds.
• This unit is not a permanent
fixture- Do not use or leave
erected in windy conditions.
Positioning:
• To prevent the wind blowing
into the entrance, position the
Gazebo so the entrance is away
from prevailing winds.
• Ensure the ground is level,
free from debris and sharp
objects that could damage the
fabric. Avoid pitching under
trees but make use of
natural wind breaks such as
hedge rows etc. Heavy winds
and rain could damage the
Gazebo.
• Try to locate the Gazebo
at least 5-10 meters away
from any other campers where
possible.
• Warning: The unit weights
approximately 111kgs.
Please lift with care.
• Follow all safety and fire
precautions when in or near
this Gazebo.
• Please note that this Gazebo
is Shower proof and not
Waterproof.
• Practice assembling and
dismantling the Gazebo before
use to familiarise yourself with
the components and fittings.
• Take note of all the
components and fittings and
ensure you don’t forget anything
when dismantling.
• Before each use check you
have all the components and
fittings, and that none of them
are damaged.
Important – Please read these instructions fully before starting assembly
The canopy and
sides of this
Gazebo ate not fire
proof, follow the
fire precautions and safety
at all times.
Gazebo as it may cause a fire
hazard.
• Do not smoke or allow
smoking in or around the
Gazebo.
• Do not use naked flames in
or around the Gazebo-there
is no cooking area within the
Gazebo.
• Do not store cooking
apparatus, BBQs stc within the
Fire Precautions and safety
Care and storage
Care and storage
• Take care when dismantling
the Gazebo. Follow the
assembly instructions in the
reverse order and do not force
the frame.
• Never remove the pegs by
pulling on the guy ropes, fabric
or Gazebo legs.
• Ensure all parts of the Gazebo
are completely dry before
repacking.
If necessary unpack the parts
When you return home and
allow to dry completely before
repacking and storing.
• All oarts should be cleaned
and packed separately. When
completely dry gently remove
any dirt and debris from the
fabric with a soft brush.
•Never use abrasive cleaners
or detergents.
•To avoid any risks of suffocation to animals or children dispose of the plastic bags immediately.
•As with all surfaces clean with a damp cloth and mild detergent,do not use bleach or abrasive products.
3
Components - Parts & Fittings
Please check you have all the parts listed below
1 x Roof 2 x Side panel
9 x Centre Joint 6 x Corner Joint 10 x Base Plate
2 x End Panel
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
If you have damaged or missing components, call the
Components - Fittings
Please check you have all the fittings listed below
1
4 5 6
7 8 9
2
3
12 x Support Pole10 x Top Pole 10 x Leg Pole
A
Peg x 46
E
Wing Screw x 54
I
Spanner x 1
F
Guy rope x 4
G
Canopy Ties x 60
H
Ratchet Bell x 4
B
Long Peg x 14
C
Large Peg x 4
D
Metal Bar x 1
Customer Helpline: Argos = 0345 6400800
4
Assembly Instructions
Step 1
Step 2
E
E
4
8 8 8 8 55
4 4
4
4
5
8
8
8
5
Stage 1 – Assembling the connecting frames
Fig.1
Fig.3
Fig.2
E
8
5
4
5
1.Fully insert Support
Pole into the Centre
joint and Corner
Joint . Then use
Wing Screws to fix
the Centre Joint and
Corner Joint onto
the Support Pole .
See fig.1.
8
4
5
4
8
Use the same method
as in fig 1 to fix the
other 3 Support Poles
on the centre
Joint and Corner
Joint .
See fig.2.
Repeat steps 1 and 2
to assemble Two more
connecting frames.
See fig.3.
5
Assembly Instructions
Step 3
Step 4
E
E
7
7
7
7
7
7
7
7
7
7
Stage 2 – Fitting the connecting frames
Fig.5
Fig.4
Fully insert Top Poles
into one of the connecting
frames. Then use Wing
Screws to fix the Top
Pole in the unit.
See fig.4.
Firmly fit the other two
connecting frames to the
unit. Then use Wing
Screws to fix them.
See fig.5.
7
7
E
E
Connecting Frame
Connecting Frame
G
1
9
6
Fig.6
Fig.7
6
Assembly Instructions
Step 5
Step 6
Stage 3 – Fitting the Roof
Carefully locate the
Roof on top of the unit.
Then use Canopy Ties
to fix the Roof onto the
unit.
See fig.6.
Unscrew the Nut and
Screw from the Base
Plate .
See fig.7.
Use the Nut and Screw to
fix the Base Plate on
the Leg Pole .
See fig.7.
1
G
6
6
9
E
Fig.8
Fig.9
Fig.10
G
7
Assembly Instructions
Step 7
Step 8
Stage 4 – Fitting the Leg Poles
9
3
3
3
Use Wing Screws to
fix 5 Leg Poles on
one side of the unit.
See fig.8.
Use the same Canopy
Ties as before to fix
the top of the End Panels
onto the unit.
See fig.9.
Use Wing Screws to
fix the other 5 Leg Poles
on the other sides of
the unit.
See fig.10.
9
E
9
9
G
E
Fig.13
Fig.14
Fig.15
Fig.16
Fig.11
Fig.12
G
8
Assembly Instructions
Step 9
Step 10
Stage 5 – Fitting the Side Panels
Step 10
Stage 6 – Pegging Down the Gazebo
3
2
2
2
Velcro Tape
Hook
B
F
B
A
A
B
F
B
F
Use the same Canopy
Ties as before to fix
the top of the Side Panels
onto the unit.
See fig. 11.
Use the Velcro tapes on
the Side Panels and
End Panels to fix
them on the Leg Poles.
See fig. 11
Attach the Roof’s Hooks
into holes on the Leg
Poles. Tighten by moving
the Hook to a lower hole.
See fig. 12.
Secure the Gazebo by
pegging the Side and
End Panels into the
ground using Pegs
Care must be taken not
to bend the Pegs.
use a rubber mallet if the
ground is hard.
See fig. 13.
Use the Pegs to
secure the Base Plates
on the ground.
See fig. 16.
Attach the ends of the
Guy Ropes to the
D rings on Gazebo. Use
Long Pegs to secure
the other ends to the
ground.
See fig. 14 and 15.
2
G
Fig.17
Fig.18
Fig.19 Fig.20 Fig.21
Fig.22
9
Assembly Instructions
Step 11
Step 10
Stage 7 – Fitting the Ratchet Bells
Step 12
Stage 8 – Finishing the Unit
Attach one end of the
Ratchet Bell to the unit.
See fig. 17 and 18.
Insert Metal Bar into
top of hole of the Large
Peg , with the help of
the Bar, rotate the Large
Peg into the ground at
the desired location.
See fig. 18 and 20.
Hook the other end of the
Ratchet Bell onto the
Large Peg .
See fig. 18 and 19.
Repeat steps 1 to 3 to
attach the other Ratchet
Bells .
See fig. 18.
Use the Ratchet on the
Ratchet Bells to
tension the canvas.
See fig.21.
CAUTION: Do not
Assemble or Dissemble
during strong wind.
Always zip up both doors
when you leave the
Gazebo.
D
C
C
H
H
H
H
D
C
C
H
H
H
For further assistance please visit http://www.argos-support.co.uk
If you need help or have damaged or missing parts, call the
Customer Helpline: Argos = 0345 6400800
Address: 489-499 Avebury Boulevard Saxon Gate West, Central Milton Keynes Bucks,MK9, 2NW
/
