Humax DTT-NANO User manual

Category
TV set-top boxes
Type
User manual

Humax DTT-NANO is a digital terrestrial MHP receiver with a default PIN code of 0000. Enjoy a wide range of features with this versatile device, including easy installation, a user-friendly interface, and a variety of viewing options. Connect to your TV and explore a world of digital entertainment.

Humax DTT-NANO is a digital terrestrial MHP receiver with a default PIN code of 0000. Enjoy a wide range of features with this versatile device, including easy installation, a user-friendly interface, and a variety of viewing options. Connect to your TV and explore a world of digital entertainment.

The default PIN Code is set to 0000.
User’s Manual
DTT nano
Digital Terrestrial MHP Receiver
GB2
User’s Manual
Notice
Negation of responsibility
The information contained in this user’s manual is based on the characteristics of the product at the time
the initial draft was made. Despite eort to provide information on the specic features and functions of
the product, details of the hardware and software are not provided. The features relevant to installation
and maintenance are not described. Functions that are not seen in the hardware and software may appear
in the manual. Humax srl has no obligation of prior notice for additions or changes that may occur in the
future.
The information and features of the product in this user’s manual are subject to change without
prior notice.
Note:
You can download the electronic version of the user’s manual from the website
www.humaxdigital.com.
Warranty
The warranty does not cover parts which may become defective due to misuse of the information
contained in this manual.
Trademarks
• IrdetoisatrademarkofMindportBV.
• NagravisionisaregisteredtrademarkofKUDELSKIS.A.
• ConaxisatrademarkofTelenorConaxAS.
Warnings, Cautions and Notes
Throughoutthewholemanual,payspecialattentiontothefollowingmarksthatindicatehazardous
situations.
• Warning
Indicatesahazardoussituationwhichcouldresultinseriousinjury.
• Caution
Indicatesasituationwhichcoulddamagetheequipmentorotherapparatus.
• Note
Indicatesadditionalinformationtomaketheuserawareofpossibleproblemsandinformationofany
importance to help understand, use and maintain the installation.
Notice
GB3
User’s Manual
Meaning of Symbols
Toreducetheriskofelectricshock,donotremovecover(orback).Nouserserviceable
partsinside.Referservicingtoqualiedservicepersonnel.
Thissymbolindicatesdangerousvoltageinsidetheproductthatpresentsariskof
electricshockorpersonalinjury.
This symbol indicates important instructions accompanying the product.
Customer information
According to art. 13 of the Legislative Decree 25th July 2005, no. 15 Application of the Directives
2002/95/CE, 2002/96/CE and 2003/108/CE, regarding the reduction of dangerous substances in
electric and electronic products, as well as the waste disposal“.
The symbol with the crossed refuse bin, present on the product, indicates that the
product must be collected separately from other refuse after his lifetime is expired.
This means that the customer must hand over the product at the end of the lifetime
toanauthorizedcollectioncenterforelectronicandelectrotechnicalrefuse.Asan
alternative the customer can hand over the product to a dealer when he purchases an
equivalentproduct,accordinglytotheprincipleoneinreturnforone.
Aprofessionaldierentiatedcollectionofnolongerusedproductsforrecycling,utilizationordisposal,
helpstoreducenegativeconsequencesfortheenvironmentandthehealth.Inadditiontheutilizationof
materials composing the product will be supported.
The illegal disposal of the product by the customer results in the application of the administrative nes
accordingtoLegislativeDecreeno.22/1997(article50andfollowingsofLegislativeDecreeno.22/1997).
GB4
User’s Manual
Safety Warning
Security notice
This product has been manufactured to comply with international safety standards. Please read the
following safety precautions carefully.
Safety Instructions and Precautions
1. MAINS SUPPLY
100-240Va.c.,50/60Hz
• Operatethisproductonlyfromthetypeofpowersupplyindicatedonthemarkinglabel.Ifyouare
not sure of the type of power supplied to your home, consult your local power company.
• Disconnecttheproductfromthemainsbeforeyoustartanymaintenanceorinstallation
procedures.
2. OVERLOADING
• Donotoverloadawalloutlet,extensioncordoradapterasthismayresultinelectricreorshock.
3. LIQUID
• Theproductshouldnotbeexposedtoliquidofanykind.Inaddition,noobjectslledwithliquid
should be placed on the apparatus.
4. CLEANING
• Disconnecttheproductfromthewalloutletbeforecleaning.
• Usealightdampcloth(nosolvents)todusttheproduct.
5. VENTILATION
• Theslotsontopoftheproductmustbeleftuncoveredtoallowproperairowintotheunit.
• Donotstandtheproductonsoftfurnishingsorcarpets.
• Donotstackelectronicequipmentsontopoftheproduct.
6. ATTACHMENTS
• Donotuseanyunsupportedattachmentsasthesemaybehazardousorcausedamagetothe
product.
7. CONNECTION TO THE AERIAL
• Disconnecttheproductfromthemainsbeforeconnectingordisconnectingthecablefromthe
aerial. Failure to do so can damage the aerial.
8. CONNECTION TO THE TV
• DisconnecttheproductfromthemainsbeforeconnectingordisconnectingthecablefromtheTV.
FailuretodosocandamagetheTV.
9. LOCATION
• Placetheproductindoorstoavoidexposingittolightning,rainorsun.
• Donotplaceitneararadiatororheatregister.
• Makesureithasmorethan10cmclearancefromanyappliancessusceptibletoelectromagnetic
inuences,suchasaTVoraVCR.
• Donotblocktheopeningswithanyobject,anddonotplacetheproductonabed,sofa,rug,or
other similar surface.
Safety Warning
GB5
User’s Manual
• Ifyouplacetheproductonarackorabookcase,ensurethatthereisadequateventilationandthat
you have followed the manufacturer’s instructions for mounting.
• Donotplacetheproductonanunstablecart,stand,tripod,bracket,ortablewhereitcanfall.
• Afallingproductcancauseseriousinjurytoachildoradult,andseriousdamagetotheappliance.
10. LIGHTNING, STORM or NOT IN USE
• Unplugtheproductfromthewalloutletanddisconnecttheantennaduringathunderstormor
when left unattended and unused for long periods of time. This will prevent damage to the unit
duetolightningandpower-surges.
11. EXTRANEOUS OBJECTS
• Donotinsertanythingthroughtheopeningsintheunit,wheretheycantouchdangerousvoltage
points or damage parts.
12. REPLACEMENT of PARTS
• Whenreplacementofpartsisrequired,besuretheservicetechnicianusesreplacementparts
specied by the manufacturer or those that have the same characteristics as the original part.
Unauthorizedsubstitutionmayresultinadditionaldamagetotheunit.
Warning
1. To avoid damage of the power cord or plug;
• Donotmodifyorprocessthepowercordorplugarbitrarily.
• Donotbendortwistthepowercord.
• Makesuretodisconnectthepowercordholdingtheplug.
• Keepheatingappliancesasfaraspossiblefromthepowercordinordertopreventthecovervinyl
from melting.
• Themainsplug,asadisconnectiondevice,shallremainreadilyaccessiblebytheuser.
2. To avoid electrical shock;
• Donotopenthemainbody.
• Donotinsertmetalorinammableobjectsinsidetheproduct.
• Donottouchthepowerplugwithwethands.
• Disconnectthepowercordincaseoflightning.
3. To avoid damage of product;
• Donotusetheproductwhenitisoutoforder.Ifyoucontinuetousetheproductwhendefective,
seriousdamagecanbecausedtoit.Makesuretocontactyourlocalproductdistributorifthe
product is out of order.
• DonotinsertmetaloraliensubstanceintotheslotsforthemodulesorSmartcards.Itmaycause
damage to the product and reduce its life span.
Attention
Itisrecommendedtomakesurethepowerconnection,onthesideoftheproduct,iseasilyaccessible
when connecting or disconnecting the power.
GB6
User’s Manual
Contents
1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7
1.1PackageContents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB7
1.2Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB8
1.3RemoteControl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB9
2. Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB11
2.1InstallationWizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB11
2.2BasicFunction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB12
3. Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB16
3.1Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB16
3.2Preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB18
3.3System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB21
3.4PayPerViewServices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB24
4. Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB25
4.1OTA(OvertheAir) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB25
5. Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB26
5.1TroubleShooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB26
5.2ErrorMessage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GB27
6. Specication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB29
7. Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB31
GB7
User’s Manual
1.1 Package Contents
Whenyouunpackyourpackagecontents,makesureyouhaveallthenecessaryitemsshowningure
below.Ifanyofitemsismissingordamaged,pleasecontactyourproductdealerforreplacement.
Note:
• Faultsmayoccuriftheremotecontrolisleftwithoutbatteryforalongtime.
Alwayskeepthebatteryinsertedintheremotecontrol.
• Packagecontentsmayvaryaccordingtoarea.
1. Before Using the Product
Batteries
Quick GuideRemote Control
External IR Module
Scart Cable
Quick Guide
Adapter
GB8
User’s Manual
1. Before Using the Product
1.2 Setup
1. RS-232C
ConnectstothePCtoupdatesoftware.
2. IR
ConnectstotheexternalIRmodule.
3. ANTENNA IN
Connectstheaerialcable.
4. TV SCART
ConnectstotheTVusingaTVSCARTcable.
5. S/PDIF
ConnectstotheaudiosystemusinganS/PDIFcable.(digitalaudio)
6. Power Adapter
Connectstothepoweradapter.
7. TV/VCR
ConnectstotheRFINoftheTVorVCRusinganRFcable.
8. POWER SWITCH
Poweron/o.
Note: Theproductissubjecttochangewithoutnotice.
ANTENNA IN TV/VCR
1
4
6 5
7
2 3
8
1. Before Using the Product
GB9
User’s Manual
1. TV/RADIO
SwitchesbetweenTVandradiomodes.
2. MUTE
Mutes or unmutes the audio temporarily.
3. NUMERIC(0-9) BUTTONS
EntersaTV/radiochannelnumber.
4. LIST
Displays the channel list.
5. BACK
Closesandreturnstothepreviousmenuand
screen.
6. ARROW BUTTONS
Changesthechannelormovesthecursorup,
down, left or right.
7. COLOUR BUTTONS(R/G/Y/B)
Selectthecolourkeysforinteractiveapplications.
8. CH-/CH+ or PAGE-/PAGE+
Changesthechannelorpage.
9. MENU
Displays the main menu.
10. i (INFORMATION)
Displays the channel and programme information.
11. APP
Displays application list.
1.3 Remote Control
Note: Theremotecontrolissubjecttochangewithoutnotice.
4
5
8
9
3
10
11
1
6
7
12
13
14
15
16
17
18
19
2
GB10
User’s Manual
1. Before Using the Product
12. STANDBY
Switchesbetweenoperationandstandbymodes.
13. GUIDE
Displays the programme guide.
14. EXIT
ExitsallOn-ScreenDisplay(OSD)screens.
15. OK
Selectsamenuorconrmstheselectedoperation.
16. V-/V+
Adjuststheaudiovolume.
17. TEXT
SwitchesbetweentheteletextandTVmodes.
18. SOUNDTRACK
Displaysthesoundtracklist.
19. SUBTITLE
Displays the subtitle language list.
4
5
8
9
3
10
11
1
6
7
12
13
14
15
16
17
18
19
2
GB11
User’s Manual
2.1 Installation Wizard
Whenpoweringonyourproductforthersttimeafterpurchasing,theInstallationWizardisautomatically
started.
Youcaneasilyset-upusingsimpleorganizationandoptions,andwatchthebroadcastingaftercompleting
theset-upprocedure.
Note: ThedefaultPINCodeissetto0000.
1. Language
Youcanselectmenu,audio,andthesubtitlelanguage.Select
the appropriate language from the list and press the OK button
to save the selected language as a default language.
2. Search Channel
YoucansearchchannelsbyselectingChannel,Frequencyand
Bandwidth.
YoucansetwhethertousetheLCNusingthet/u button.
Enteryourdesiredchannel,frequencyandBandwidthtosearch
directly. Then press the OK button.
IfyoupresstheRED button, you can automatically search
channels without entering any other information.
2. Basic Operation
GB12
User’s Manual
2. Basic Operation
SelectthechannelyouwanttoapplytotheLCNusingtheRED
button. Press the OK button to move to the next.
Press the RED button to add a channel.
Press the GREEN button to add all channels.
Press the OK button to save.
2.2 Basic Function
1. Program Banner
General Information
ProgramBannerisalwaysdisplayedforaspecicperiodoftimewheneveryouswitchchannels.Youcan
view the program banner by pressing the i button while watching a program. Press the EXIT button to
hidetheProgramBanner.
TheGeneralInformationisdisplayedasfollowingonthescreen.
1. Channelnumber
2. Theinformationofthepreviousornextchannel
3. Channelname
4. Programname
LAmore vero non si compra - Puntata ...
Subtitle Languages
09:00 09:45
OK
3
7 10 11 8 9
2 1 4 5
SitcomUNO
29/08 04:18
6
2. Basic Operation
GB13
User’s Manual
5. Programbroadcastingtimeandprogressbar:displaysprogramplayingtimeandprogressbar.
6. Currenttimeanddate
7. SubtitleLanguage
8. NextprogramInformation:displayedifnextprograminformationisprovided.Pressthebuttonto
display the next program information.
9. Icons
Represents parental level.
Displayed only when there is any MHP application.
Displayed only when there is any teletext information.
Displayed only when subtitle information is available.
10. Conrmtheselectedoperation.
11. Detailedprograminformation
Note: Ifthereisnoavailableprograminformation,programinformationisnotdisplayed.
Detailed Program Information
You can see detailed information about the current program.
Press the i button again while the program banner is displayed
to view detailed information. Press the i button again to hide
the information box.
2. Volume Control/Mute
Press the V-/V +buttonstoadjusttheaudiovolume.PresstheMUTE button to disables the sound
temporarily.
Note: The mute function remains enabled while you change the channel.
GB14
User’s Manual
2. Basic Operation
3. Channel Change
You can switch the current channel using one of the following methods.
1. PresstheCH-/CH+ button.
2. EnteryourdesiredchannelnumericusingtheNUMERIC(0-9) button to move to the channel directly.
3. PresstheTV/RADIObuttontoswitchbetweenTVchannelandRadiochannel.
Note: You can switch channel using the channel list or program guide. Please refer to 2.2.6 TV Guide
and 2.2.7 Channel List for more information.
4. Subtitle
IfthecurrentprogramprovidesSubtitleinformation,youcanselectthelanguagefortheSubtitle.
1. PresstheSUBTITLE button to display the subtitle language list.
2. YoucanalsodisplaythesubtitlelanguagelistbypressingtheGREEN button while the program
banner is displayed.
3. Selectyourdesiredsubtitlelanguage.Thenthesubtitlewillbedisplayedintheselectedlanguageat
the bottom of the screen.
Note: Please refer to 3.2.6 Subtitle and 3.3.2 Language Options for more information.
5. Soundtrack
Ifthecurrentprogramisavailableinmultipleaudiolanguages,youcanselectthelanguagethatyouwish
to listen to.
1. PresstheSOUNDTRACKbuttontodisplaysoundtracklistandselectyourdesiredaudiolanguage.
2. PresstheEXIT or SOUNDTRACKbuttontoexitfromthesoundtracklist.
2. Basic Operation
GB15
User’s Manual
6. TV Guide
The Program Guide displays program information about each
channel, based on the date and time.
Press the GUIDE button.
7. Channel List
Threetypesofchannellistsareprovidedforeasyandquickchannelsearching.(AllTV,AllRadio,Favorite
Channels)
1. PresstheLIST button while watching a program to display
the selected channel list.
2. SelectyourdesiredchannelandpresstheOK button to
change the channel. You can switch into other channel on
the channel list using the
t/u button.
3. PresstheEXIT or LIST button to exit the channel list screen.
GB16
User’s Manual
3. Menu
Youcaneasilynavigatethemenuusingthefollowinginstructions:
1. PresstheMENU button to display the main menu screen.
2. Selectaitemusingthe
p/q button.
3. PresstheOKbuttontomovefromthemenutothesub-menu.
4. Pressthet/u button to select option values.
5. PresstheOK button to save your selection.
6. Pressthe BACKbuttontoreturntotheprevious-menu.
7. Pressthe EXITbuttontoclosetheMENU.
Note:
• Somemenuitemsareaccesscontrolled.Whenaccessingtotheprotectedmenu,youwillbeprompted
toinputthePINCode.InputyourPINCodeusingtheNUMERIC(0-9) button.
• ThedefaultPINCodeissetto0000.
MainMenushowsthefollowinginformation:
Channel FavoriteChannel,BlockChannel,ChangeChannelNo,DeleteChannel
Preference
ParentalRating,BannerDuration,ChangePINCode,ApplicationAuto-start,Channel
ChangeMode,Subtitle,UseLCN
System
A/VSetting,LanguageOptions,UpgradeSoftware,SearchChannel,SystemStatus,
SignalDetection,Timezone,FactoryReset
Pay per View
Services
MediasetPremium,IredetoConditionalAccess,ConaxConditionalAccess,Pangea
3.1 Channel
1. Favorite Channel
You can create the favorite group.
1. SelectthechannelyouwantandpresstheRED button to
add to the favorite list.
2. PresstheGREENbuttontoswitchfromTVtoRadiochannel
list.
3. SelectthechannelonthefavoritelistandpresstheRED
button to delete the channel.
3. Menu
GB17
User’s Manual
2. Block Channel
Youcanlockorunlockchannels.
1. PresstheRED buttontolockorunlock.
2. PresstheGREENbuttontoswitchfromTVtoRadiochannel
list.
Whenswitchingtothelockedchannel,youmustenterthePIN
Codetowatchaprogram.TheDefaultPINCodeis0000.Ifyou
haveforgottenyourPINCode,pleasecontactyourlocalproduct
distributor.
3. Change Channel No
You can change the channel number.
SelectachannelyouwantandpresstheRED button.
EnterthechannelnumberusingtheNUMERIC(0-9) buttons
and press the OK button to save.
4. Delete Channel
You can delete one or all channels.
Press the RED button to delete one and press the GREEN
button to delete all channels.
IfyoupresstheRED button again, it will be canceled.
GB18
User’s Manual
3. Menu
3.2 Preference
1. Parental Rating
Youcanblockprogramsaccordingtotheagelevelyouhaveset.
Selecttheagelevel.(NoControl,7years,12years,14years,18
years,LockAll)
Note:
• YouhavetoenterPINCodetowatchtheprogramwhichis
blockedbytheagelevel.
• ThedefaultPINCodeis0000.
2. Banner Duration
YoucansetthedurationoftheminiEPGtobeautomatically
displayedwhenyouswitchthechannel.(0sec,3sec,5sec,10
sec,15sec)
3. Menu
GB19
User’s Manual
3. Change PIN Code
YoucanchangetheexistingPINCodeintoanewone.Input
yourPINCode.
InputtheNewPINCodeandre-inputtoconrm.
Note:
• ThedefaultPINCodeis 0000.
• IfyouhaveforgottenyourPINCode,pleasecontactyour
local product distributor.
4. Application Auto-start
YoucanselectYesorNotosettheMHPapplicationstarting
attributes.Ifitisselected,allinteractiveapplicationinauto-start
mode will be started automatically at every modication of
program.
5. Channel Change Mode
YoucanchoosethechannelnavigationmodeamongAllTV,All
RadioandFavoriteChannels.
GB20
User’s Manual
3. Menu
6. Subtitle
YoucanselectthesubtitleOnorO.
7. Use LCN
YoucanselecttheLCNYesorNo.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Humax DTT-NANO User manual

Category
TV set-top boxes
Type
User manual

Humax DTT-NANO is a digital terrestrial MHP receiver with a default PIN code of 0000. Enjoy a wide range of features with this versatile device, including easy installation, a user-friendly interface, and a variety of viewing options. Connect to your TV and explore a world of digital entertainment.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI