W Audio DTM600BP User manual

Brand
W Audio
Model
DTM600BP
Category
Musical Equipment
Type
User manual

This manual is also suitable for

W Audio DTM600BP is a professional wireless beltpack system that offers exceptional vocal reproduction and stable wireless connectivity, allowing freedom of movement on stage. With 80 selectable frequencies in the 606-614Mhz range, it provides reliable operation and crystal-clear sound. The metal-bodied transmitter ensures durability, while the foam-lined carry case protects the system during transport. Expand your handheld system's flexibility by using the DTM600BP.

W Audio DTM600BP is a professional wireless beltpack system that offers exceptional vocal reproduction and stable wireless connectivity, allowing freedom of movement on stage. With 80 selectable frequencies in the 606-614Mhz range, it provides reliable operation and crystal-clear sound. The metal-bodied transmitter ensures durability, while the foam-lined carry case protects the system during transport. Expand your handheld system's flexibility by using the DTM600BP.

Order codes:
MIC70 - DTM 800H 863.0Mhz-865.0Mhz
MIC72 - DTM 600H 606.0Mhz-614.0Mhz
MIC70A - DTM 800 863.0Mhz-865.0Mhz
MIC72A - DTM 600 606.0Mhz-614.0Mhz
DTM Series Diversity Systems
User Manual
www.prolight.co.uk DTM Series User Manual
2
Safety adviceSafety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Incaseofmalfunctionthisunitshouldbereturnedforserviceorinspection.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablevoltage9VDC,1500mA.
(240VAC~50Hzpowersupplyincluded)
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thisxtureisforprofessionaluseonly-itisnotdesigned
fororsuitableforhouseholduse.Theproductmustbe
installedbyaqualiedtechnicianinaccordancewithlocal
territoryregulations.Thesafetyoftheinstallationisthe
responsibilityoftheinstaller.Thexturepresentsrisksof
severeinjuryordeathduetorehazards,electricshock
andfalls.
• WARRANTY:Oneyearfromdateofpurchase.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM MOISTURE,
RAIN AND LIQUIDS, AND
OUT OF DAMP/HUMID
ENVIRONMENTS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
www.prolight.co.uk DTM Series User Manual
3
Product overview & technical specications
DTMserieswirelessmicrophonesfeaturetwinUHFbeltpackorhandheldsystemswith20(863-865Mhz)or80
(606-614Mhz)selectablefrequencies.AvailableineitherChannel38(606-614Mhz)fortheDTM600orChannel70
(863-865Mhz)fortheDTM800;bothsystemsutiliseatruediversity,fullbandwidthreceiverfortheultimateinRFstability.
Outstandingvocalreproductionandstablewirelessconnectivityallowfreedomofmovementonstage.Thesesystemsoffer
crystalclearsoundreproductionandrocksolidreliability.Metalbodiedtransmittersfeatureergonomicdesignwitharugged
housingtostanduptotherigoursoftheroad.Suppliedwithafoamlinedcarrycaseforprotectionduringtransit.Theexibility
ofthehandheldsystemsmaybeincreasedbypurchasingtheadditionalDTM600BP.
DTM Series Diversity Systems
Inthehandheldsystembox:
1 x receiver, 2 x wireless microphones,
1 x PSU, 1 x audio lead & 1 x user manual
Inthebeltpackbox:
1 x receiver, 2 x beltpacks, 1 x headset
microphone, 1 x lavalier microphone, 1 x PSU,
1 x audio lead & 1 x user manual
Specications DTM 800H Twin Handheld
Diversity System
DTM 600H Twin Handheld
Diversity System
DTM 800 Twin Beltpack
Diversity System
DTM 600 Twin Beltpack
Diversity System
Operatingfrequency 863.0Mhz-865.0Mhz 606.0Mhz-614.0Mhz 863.0Mhz-865.0Mhz 606.0Mhz-614.0Mhz
Powersupply DC9V,1500mA(adaptorsupplied) DC9V,1500mA(adaptorsupplied)
Ordercode MIC70 MIC72 MIC70A MIC72A
•PhaseLockLoop(PLL)
•IRsyncfacilityforsimplesetup
•Truediversityreceiver
•863-865Mhz-20frequencies
or606-614Mhz-80frequencies
•LargeLCDreceiverdisplay
includingRFlevel,AFlevel,
channelandfrequency
•LCDtransmitterdisplay
•Autofrequencyscanning
•BalancedXLRoutputfor
eachchannelplusunbalanced
mixedoutput
•Frequencyresponse(handheld):
40Hz-15kHz
•Transmitterbatteryconguration:
2x1.5VAA(notsupplied)
•Audiooutputlevel:400mV
•Dynamicrange:96dB
•Receiverpowersupply:9VDC
(mainsadaptorsupplied)
•1Ufullwidthrackmountreceiver
www.prolight.co.uk DTM Series User Manual
4
Receiver front
panel identication:
1.PowerSwitch
On/Offcontrolforthesystemreceiver
2.VolumeControl–ChannelA
Thereceiversoutputvolumeis
adjustable.Turnthelevelcontrolanti
clockwisetothelowestsetting,or
turnclockwisetoadjusttothehighest
setting.Eachchannelfeaturesan
independentvolumecontrol.
3.IRTransceiver
TheIRtransceiverisusedto
communicatewiththesystems
transmittersduringsetup.
4.UpButton–ChannelA
5.SetButton–ChannelA
6.DownButton–ChannelA
7.Display
Thereceiverfeaturesabacklitdisplay
allowingtheusertoseeinformation
aboutthereceiverincludingfrequency,
channels,mutestatus,audio,
RFstatusandbatterylevel.
8.DownButton–ChannelB
9.SetButton–ChannelB
10.UpButton–ChannelB
11.VolumeControl–ChannelB
Thereceiver’soutputvolumeis
adjustable.Turnthelevelcontrolanti
clockwisetothelowestsetting,or
turnclockwisetoadjusttothehighest
setting.Eachchannelfeaturesan
independentvolumecontrol.
Receiver rear panel
identication:
12.Antenna–ChannelA
TheantennareceivestheRFradio
signalfromthetransmitterunit.For
optimumreception,orientatevertically.
Receptionmaybeimpairedbyobstacles
betweenthetransmitterandreceiver.
Highpowerelectricalequipmentcan
causeunwantedinterference.
13.BalancedAudioOutputB
Individual,balancedaudiooutputs
via3pinXLRforaudiochannelB.
14.BalancedAudioOutputA
Individual,balancedaudiooutputs
via3pinXLRforaudiochannelA.
15.Audio(MIX)Output
6.35mm(1/4”)jacksocketoutputting
anunbalanced,linelevelaudiooutput
featuringbothaudiochannels.
16.DCPowerInput
Thereceiverispoweredbyastandard
DCpowerinput9VDC,1500mA
regulatedvoltagesupply.
17.Antenna–ChannelB
TheantennareceivestheRFradio
signalfromthetransmitterunit.For
optimumreception,orientatevertically.
Receptionmaybeimpairedbyobstacles
betweenthetransmitterandreceiver.
Highpowerelectricalequipmentcan
causeunwantedinterference.
1 2
12 13 14 15 16 17
3 84 95 106 117
Operating instructions
www.prolight.co.uk DTM Series User Manual
5
Display Identication:
1.RFLevel
TheRFlevelindicatorisavisualrepresentationoftheradiofrequencysignalstrengthutilisinga10segmentbargraph.
Astheradiosignalreceivedisreduced,thebargraphwillreduce.
2.AFLevel
TheAFlevelindicatorisavisualrepresentationoftheaudiosignalstrengthutilisinga10segmentbargraph.
Astheaudiosignaluctuatesbargraphwillindicatethis.
3.Channelindicator
DisplaysthecurrentRFchannelinusebythetransmitter/receiver.
4.Frequency
DisplaysthecurrentRFfrequencyinusebythetransmitter/receiver.
5.BatteryLevel
Thereceiverdisplaysthecurrentbatterylevelinthetransmittersallowingremotemonitoringofthetransmittersbatterylevel.
6.IRSync
Duringsynchronisation,theIRSyncwillasharadiatingsymbol.
7.Lock
Thereceiverfeaturesalockfunctiontopreventaccidentalchangestothesettings.PressandholdLOCKtounlockthemenu
system.Afterashortperiodofinactivity,thedisplaywillautomaticallylock.
8.Hi/Lotransmitpower
TheusermayselecttheRFtransmissionpowerfromthemenusystem.Whenusedincloseproximity,thetransmittersshould
besettoLoorovergreaterdistances,settoHi.
Operating instructions
Operation:
• Carefully,lifttheantennaeintotheverticalposition.
• Connecttheincludedpowersupplytoasuitable240VAC~50HzmainsvoltageoutletandplugtheDCconnector
intotheDC.PowerInputontherearpanelofthereceiver(9VDC,1500mAminimum).
• Usingthesuppliedaudiocable,connecttheMIXOUTontherearpanelofthereceiverforbothaudiochannels
tothemixer’saudiolineinput.ThereceiveralsofeaturesbalancedXLRoutputs,oneforeachchannel.
• Switchonthepowertothereceiver,checkingthedisplaybacklightilluminates.
• Openthebatterycompartmentonthetransmitter(Beltpack–slidedownwardsawayfromthebeltclip.Handheld-unscrew
thelowerportion).Installtheappropriatebatteriesintothetransmitter,takingcaretoobservetheorientationandpolarity.
Onlyusehighquality,alkalinetypebatteries.Retthebatterycompartmentcovercarefully.
• Switchonthetransmitter,whenswitchedonthedisplayonthetransmitterwillilluminate.
Ifthedisplaydoesilluminateorglowsdimly,thebatterywillrequirereplacement.
• Adjustthevolumeonthefrontpanelofthereceiverforeachofthechannels.
• FollowtheIRSyncOperationfullytoensurethetransmittersarelinkedcorrectlytothereceiverunit.
Failuretofollowthisfullywillpreventthemicrophonesystemfromoperatingcorrectly.
• Channel(Frequency)Setup:
PressandholdtheSETbuttontounlockthemenufunction.
TheCHANNELmodewillash,usetheUP/DOWNbuttonstoselect
thedesiredchannel,thefrequencywillautomaticallychange.TheDTM
800has20availablechannelswithinthe863-865Mhzrange,where
astheDTM600has80availablewithinthe606-614Mhzrange.
Afterchangingthechannel,theIRsyncmustbecarriedouttoensure
thetransmitterismatchedforcorrectoperation.
ashes changes
www.prolight.co.uk DTM Series User Manual
6
Operation continued:
• FrequencyScanMode:
Toallowtheusertoselectafrequencyfreefrominterference,thereceiver
featuresafrequencyscanmode.Firstly,switchonanytransmittersfromother
systemsinthevicinity.PressandholdtheSETbuttontounlockthemenu
functionandthenpressSETuntilthedisplayshowsarectangleunderneath
thefrequencyheader.UsetheUporDownkeystocommencescanning.The
receiverwillstopscanningwhenitreachestherstavailablefrequency.Further
scanningcanbetriggeredbypressingtheup/downbuttonagain.Afterchang-
ingthefrequency,theIRsyncmustbecarriedouttoensurethetransmitteris
matchedforcorrectoperation.
• TransmitterPowerMode:
TheusermayselecttheRFtransmissionpowerfromthemenusystem.When
usedincloseproximity,thetransmittersshouldbesettoLoorovergreater
distances,settoHi.PressandholdtheSETbuttontounlockthemenufunction,
thenpresstheSETbuttontwicemoreuntilthePOWselectionashes.Pressthe
SETbuttontoconrmselection.Afterchangingthepowersetting,theIRsync
mustbecarriedouttoensurethetransmitterismatchedforcorrectoperation.
• IRSyncOperation:
Aftermakingchangestothesettingsonthereceiver,theIRSyncoperation
shouldbecarriedouttoensurethesettingsarereplicatedintothetransmitter
toensurecorrectoperation.
Poweronboththetransmitterandreceiver,cyclethruthemenusystemonthe
receiveruntilallsettingsarecorrect.PressandholdtheSETbuttontotrigger
theIRSyncoperation.TheIRSyncindicatorwillshowtheradiatingsymbol,
whiletheradiatingsymbolisashing,directthedisplayontherelevanttrans-
mittertowardstheIRTransceiver,thetransmitterwillthenchangetomatch
thesettingsonthereceiver.Themicrophoneisnowreadyforuse.Note:The
beltpacktransmitterIRTransceiverislocatedinsidethebatterycompartment.
Operating instructions
Handheld transmitter
identication:
1.Grille
2.LCDDisplay
3.IRTransceiver
4.PowerSwitch
5.Batterycompartment
1
2
3
4
5
WhenthePOWisashing,
theHIcanbeadjustedtoLO
ashes changes
IRSYNC
www.prolight.co.uk DTM Series User Manual
7
Operating instructions & troubleshooting
Beltpack transmitter
identication:
1.MicrophoneInput
2.VolumeControl
3.On/OffSwitch
4.PowerIndictor(illuminateswhen
batteryislowandrequireschanging)
5.Antenna
6.LCDDisplay
7.IRTransceiver
8.Batterycompartment(careshould
betakentoobservebatterypolarity)
9.Batterycover
1 2 3 4 5
6
8
9
7
Troubleshooting:
Problem Possible cause Solution
Receiver–nosound
PowerbuttonisintheOFFposition.DCpoweradapter
isnotpluggedin
Turnonthepowerbuttonpluginthepoweradapter
Receiver–noLED
Microphone-nosound
butLEDindicatorsarelit
Mictransmitterisoutofrange.Micisswitchedoff.Mic
volumeitturneddown.Batteriesinmicarenotinstalled
properly.Receiverisnotconnectedtoanampormixer.
Ensurethatthemiciswithinrange.Turnonthemicswitch.
Turnupthemicvolumeonthereceiver.Reinstallorusenew
batteries.Connectanoutputcabletoanampormixer
Distortedsoundorfeedback
The4micsmaybetooclosetogether.Batteriesarerunning
outofcharge.Micvolumemaybetoohigh.Possible
interferencefromanothersource.
Increasethedistancebetweenmics.Replacethebatteries.
Reducethevolume.Movethesystemawayfromother
electricsources.
Beltpacktransmitterplusheadsetandlavaliermicrophones
tobeusedinplaceofthehandheldtransmitter.
Optional DTM Series
Add On Beltpack Kits
Specications DTM 800BP DTM 600BP
Operatingfrequency 863.0Mhz-865.0Mhz 606.0Mhz-614.0Mhz
Batterytype 2x1.5VAA(notsupplied)
Ordercode MIC71 MIC73
NOTE:
TheDTM600/800systemisshippedwithtwohandheldtransmitters.Thereceiverinthissystemfeaturesadual
channelreceiverallowingbothhandheldmicrophonestobeusedsimultaneously,anadditionalbeltpackkitmaybe
purchasedifrequiredtobeusedinplaceofthehandheldtransmitters.Eachreceiverchannelinthissystemmayonlybe
usedwithonetransmitteratanyonetime.Iftheuserattemptstopoweron,andusetwotransmitterswithonereceiver
thesystemwillmalfunctionandnotoperatecorrectlyasonetransmitterwillcutouttheRFRadiosignaltothesecond
transmitter.
Availableintwofrequencyranges,theDTM800seriesisforuseinthe863-865MhzCH70bandlicensefreewhilethe
DTM600seriesisforuseinthe606-614MhzCH38band.Tooperatemicrophonesinthe606-614MhzCH38bandthe
usermustobtainalicensefromtherelevantauthoritiesbeforeusingtheproduct.
www.prolight.co.uk DTM Series User Manual
8
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

W Audio DTM600BP User manual

Brand
W Audio
Model
DTM600BP
Category
Musical Equipment
Type
User manual
This manual is also suitable for

W Audio DTM600BP is a professional wireless beltpack system that offers exceptional vocal reproduction and stable wireless connectivity, allowing freedom of movement on stage. With 80 selectable frequencies in the 606-614Mhz range, it provides reliable operation and crystal-clear sound. The metal-bodied transmitter ensures durability, while the foam-lined carry case protects the system during transport. Expand your handheld system's flexibility by using the DTM600BP.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents