175400

Wooden Camera 175400 User manual

  • Hello! I am an AI chatbot trained to assist you with the Wooden Camera 175400 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Included:
UNIVERSAL LENS SUPPORT (15mm LW)
© Wooden Camera, Inc. 2011-2014
NOTE: LENS SUPPORT comes with factory installed
1/4-20 SCREW. To remove and install additional
adapters follow the steps below.
1. Select LENS SUPPORT, loosen thumscrew, locate and
loosen TIGHTENING KNOB to remove 1/4-20 SCREW.
2. Choose desired adapter type. For example: select and
tighten Y BRACKET to LARGE EXTENSION and install as
shown below.
3. Select LENS SUPPORT, insert Y BRACKET, insert
TIGHTENING KNOB, adjust left or right position and up
or down to proper lens height, tighten THUMBSCREW
until vertical & horizontal position is secure.
ROLLING Y BRACKET
3/8-16
TIGHTENING
KNOB
EXTENSIONS
SMALL & LARGE
15mm LW
1/4-20
THUMBSCREW
4. Place LENS SUPPORT on RODS and tighten using
THUMBWHEELS.
5. Unlock THUMBSCREW, center Y BRACKET position
under LENS, adjust height and re-tighten THUMBSCREW.
RODS
THUMBWHEEL
LENS
LARGE EXTENSION
/