Optoma TW610STI+ User manual

1

English

Table of Contents ............................1

Usage Notice ...................................2

Safety Information ...............................2

Precautions .........................................3

Eye Safety Warnings ..........................5

Product Features ................................5

Introduction ......................................6

Package Overview ..............................6

Product Overview ...............................7

Main Unit .............................................. 7

Control Panel ....................................... 8

Input/Output Connections .................... 9

Remote Control .................................. 10

Interactive Pen ................................... 11

Installation .....................................12

Connecting the Projector ..................12

Connect to Video Sources ................. 13

Powering the projector On / Off ........14

Powering On the Projector ................. 14

Powering Off the Projector ................. 15

Warning Indicator ............................... 15

Adjusting the Projected Image ..........16

Adjusting the Projector’s Height ........16

Adjusting the Projector’s Focus ......... 17

Adjusting Projection Image Size ........ 17

User Controls ................................19

Control Panel & Remote Control ......19

Control Panel ..................................... 19

Remote Control .................................. 20

Interactive Pen ................................... 21

On-screen Display Menus ................26

How to operate ................................. 26

Menu Tree .......................................... 27

IMAGE ............................................... 30

IMAGE | Advanced ............................ 32

DISPLAY ............................................ 34

DISPLAY | 3D ................................... 37

SETUP ............................................... 38

SETUP | Signal (RGB) ....................... 41

SETUP | Security ............................... 42

SETUP | Advanced ............................ 44

SETUP | Network ............................... 45

OPTIONS ........................................... 50

OPTIONS | Advanced ........................ 52

OPTIONS | Lamp Settings ................. 53

OPTIONS | PointBlank ......................54

Ruby Introduction ..............................56

How to use Web Control ................... 56

How to use the Card Reader ............ 63

How to use the Optoma Presenter ... 66

Appendices ....................................70

Troubleshooting ................................70

Replacing the lamp ...........................76

Compatibility Modes .........................78

Computer Compatibility ..................... 78

Video Compatibility ............................ 79

RS232 Commands and Protocol

Function List .....................................80

RS232 Pin Assignments .................... 80

RS232 Protocol Function List ............ 81

Wall Mount Installation ......................85

Optoma Global Ofces .....................86

Regulation & Safety Notices .............88

Table of Contents

2

English

Usage Notice

Safety Information

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufcient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of

the projector and to protect from over heating, it is recommended to

install the projector in a location that does not block ventilation. As an

example, do not place the projector on a crowded coffee table, sofa,

bed, etc. Do not put the projector in an enclosure such as a book case

or a cabinet that restricts air ow.

2. Do not use the projector near water or moisture. To reduce the risk

of re and/or electric shock, do not expose the projector to rain or

moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or

any other apparatus such as ampliers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specied by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused.

Physical damage/abuse would be (but not limited to):

 Unit has been dropped.

 Power supply cord or plug has been damaged.

 Liquid has been spilled on to the projector.

 Projector has been exposed to rain or moisture.

 Something has fallen in the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards. Please call

Optoma before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch

dangerous voltage points and short out parts that could result in re or

electric shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

3

English

Usage Notice

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning- Do not look into the projector’s lens when the lamp is

on. The bright light may hurt and damage your eyes.

▀■ Warning- To reduce the risk of re or electric shock, do not

expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projector as

this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow the unit to

cool down. Follow instructions as described on pages

76-77.

▀■ Warning- This projector will detect the life of the lamp itself.

Please be sure to change the lamp when it shows

warning messages.

▀■ Warning- Reset the “Lamp Reset” function from the on-screen

display “OPTIONS | Lamp Settings” menu after

replacing the lamp module (refer to page 53).

▀■ Warning- When switching the projector off, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the

projector to cool down.

▀■ Warning- Do not use lens cap when projector is in operation.

▀■ Warning- When the lamp is approaching the end of its lifetime,

the message “Lamp Warning: Lamp life exceeded.”

will show on the screen. Please contact your local

reseller or service center to change the lamp as soon

as possible.

▀■ Warning- Do not look into or point the laser pointer on your

remote control into your or someone’s eyes. Laser

pointer can cause permanent damage to eyesight.

When the lamp

reaches the end

of its life, the pro-

jector will not turn

back on until the

lamp module has

been replaced.

To replace the

lamp, follow the

procedures listed

under “Replacing

the Lamp” section

on pages 76-77.

4

English

Usage Notice

Do:

  Turn off and unplug the power plug from the AC outlet before

cleaning the product.

  Use a soft dry cloth with mild detergent to clean the display

housing.

  Disconnect the power plug from AC outlet if the product is

not being used for a long period of time.

Do not:

  Block the slots and openings on the unit provided for

ventilation.

 Use abrasive cleaners, waxes or solvents to clean the unit.

 Use under the following conditions:

- In extremely hot, cold or humid environments.



Ensure that the ambient room temperature is within

5 - 35°C.



Relative Humidity is 5 - 35°C, 80% (Max.),

non-condensing.

- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

5

English

Usage Notice

Eye Safety Warnings

▀■ Avoid staring/facing directly into the projector beam at all

times. Keep your back to the beam as much as possible.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power, use room blinds to

reduce ambient light levels.

Product Features

▀■ XGA (1024x768) Native resolution /

WXGA (1280x800) Native resolution

▀■ HD compatible – 1080p supported

▀■ VGA monitor loop through

(works on standby mode > 1W)

▀■ BrilliantColor

TM

Technology

▀■ Security Bar and Kensington Lock

▀■ RS232 control

▀■ Rapid shutdown

▀■ Built-in speakers

▀■ Network support

▀■ USB display (Mac OS is not supported)

▀■ Network display (Windows 7 64bit is not supported)

▀■ USB Reader

Monitor loop

through only sup-

port in VGA1-In/

YPbPr.

6

English

Introduction

Due to different

applications in

each country,

some regions

may have

different

accessories.

Power Cord

Package Overview

Unpack and inspect the box contents to ensure

all parts listed below are in the box. If something

is missing, please contact your nearest customer

service center.

2 × AAA Batteries

Projector with lens cap

VGA Cable

IR Remote Control

USB Cable 5m

Documentation :



User’s Manual



Warranty Card



Quick Start Card



WEEE Card

(for EMEA only)



STOP Card

(for US Only)

7

English

Introduction

Product Overview

Main Unit

1. Control Panel

2. Focus Ring

3. Speaker

4. Tilt-Adjustment Feet

5. Lens

6. IR Receiver

7. Input / Output

Connections

8. Power Socket

9. Security Bar

10. Ventilation (inlet)

11. Ventilation (outlet)

3

8

2

1

4

6

4

7

9

4

11

10

Air Flow

56

8

English

Introduction

Control Panel

LAMP

TEMP

POWER/STANDBY

MENU

S

O

U

R

C

E

7

2 31

9

4

1. Source

2. Enter / Help

3. Re-Sync

4. IR Receiver

5. Temp LED

6. Presenter

7. Four Directional Select Keys

8. Power/Standby button and LED

9. Keystone Correction

10. Menu

11. Lamp LED

511

68

10

9

English

Introduction

Input/Output Connections

Monitor loop

through only sup-

port in VGA1-In/

YPbPr.

AUDIO OUT

AUDIO1-IN

(VGA1/VGA2)

RS-232

MIC

L R

AUDIO 2-IN (S-VIDEO/VIDEO)

VIDEOS-VIDEO

HDMI

VGA-OUT

VGA1-IN / YPbPr

VGA2-IN / YPbPr

RJ-45

PB/MOUSE

SERVICE

12V OUT

USB /

DISPLAY

1. RJ-45 Networking Connector

2. 5pin Mini-USB for interactive function and rmware upgrade

3. HDMI Connector

4. VGA-Out Connector (Monitor Loop-through Output)

5. VGA1-In/YPbPr Connector

(PC Analog Signal/Component Video Input/HDTV/YPbPr)

6. S-Video Input Connector

7. Composite Video Input Connector

8. RS-232 Connector (3-pin DIN Type)

9. Audio 1 Input connector (3.5mm mini jack)

(for VGA1/VGA2)

10. 12V Trigger Relay Connector (12V, 750mA)

11. Security Bar

12. Audio Output Connector (3.5mm Mini Jack)

13. Kensington

TM

Lock Port

14. RCA Audio 2 Input connector (Left & Right)

(for S-Video/Video)

15. Microphone Input Connector

16. VGA2-In/YPbPr Connector

(PC Analog Signal/Component Video Input/HDTV/YPbPr)

17. 5pin Mini-USB for Display

18. USB for Wireless dongle & Thumb drive

19. Power Socket

6542

13 1119

1

16 12

3 7 8 9 10

14

15

12V OUT

1718

10

English

Introduction

Remote Control

The interface

is subject to

model’s speci-

cations.

1. LED Indicator

2. Power On/Off

3. Four Directional

Select Keys

4. Mouse Right Click

5. Page Up

6. Re-Sync

7. Page Down

8. Volume +/-

9. 3D

10. AV mute

11. Video

12. PC/Mouse control

13. Mouse Left Click

14. Enter/Help

15. Source

16. Keystone +/-

17. Menu

18. Brightness

19. HDMI

20. S-Video

21. Numbered keypad

(for password input)

22. Freeze

23. VGA

1

9

10

2322

20

19

18

14

17

8

11

21

15

6

2

16

12

13

7

4

3

5

11

English

Introduction

6

1. Battery Cover

2. Mouse Right Click

3. Menu

4. Mouse Left Click

Interactive Pen

5

1

8

7

4

3

2

Battery Installation:

1. Press rmly and slide the battery cover off. 1

2. Install new batteries (AAA). Ensure that you have the batter-

ies’ polarity (+/–) aligned correctly. 2

3. Slip the cover back over the batteries until it snaps into place.

5. Lens

6. Nib

7. Power On/Off

8. LED Indicators

1

2

3

The interactive

pen is optional

accessory.

Warning:

• Danger of explosion

if battery is incor-

rectly replaced.

• Replace only with

the same or equiva-

lent type recom-

mended by the

manufacturer.

• Dispose of used

batteries according

to your local regula-

tions.

• Do not mix different

types of batteries

or new and old bat-

teries.

12

English

Installation

Connecting the Projector

Due to the

difference in

applications

for each

country, some

regions may

have different

accessories.

(*) Optional

accessory

AUDIO OUT

AUDIO1-IN

(VGA1/VGA2)

RS-232

MIC

L R

AUDIO 2-IN (S-VIDEO/VIDEO)

VIDEOS-VIDEO

HDMI

VGA-OUT

VGA1-IN / YPbPr

VGA2-IN / YPbPr

RJ-45

PB/MOUSE

SERVICE

12V OUT

USB /

DISPLAY

m o l ex

MOLEX

m o l ex

MOLEX

E62405SP

R

1

2 4

5

1....................................................................................................Power Cord

2..............................................................................................*Network Cable

3.....................................................................................................USB Cable

4...........................................................................................*DVI/HDMI Cable

5.....................................................................................................VGA Cable

6................................................................................................*RS232 Cable

7.........................................................................................*Audio Input Cable

8........................................................................................*VGA Output Cable

9......................................................................................*Audio Output Cable

10.............................................................................................. *12V DC Plug

11. .......................................................................................... *Interactive Pen

6

73

+12V Output

8

9

Audio Output

3

10

11

13

English

Installation

Connect to Video Sources

Due to the

difference in

applications

for each

country, some

regions may

have different

accessories.

(*) Optional

accessory

AUDIO OUT

AUDIO1-IN

(VGA1/VGA2)

RS-232

MIC

L R

AUDIO 2-IN (S-VIDEO/VIDEO)

VIDEOS-VIDEO

HDMI

VGA-OUT

VGA1-IN / YPbPr

VGA2-IN / YPbPr

RJ-45

PB/MOUSE

SERVICE

12V OUT

USB /

DISPLAY

E62405SP

R

1....................................................................................................Power Cord

2..................................................................................................*HDMI Cable

3........................................................................................ *Microphone Cable

4................................................................................... *SCART/VGA Adaptor

5.....................................................................................................VGA Cable

6.............................................................................................. *S-Video Cable

7................................................................................*Composite Video Cable

8.................................................................................*Audio Cable Jack/RCA

9................................................*15-Pin to 3 RCA Component/HDTV Adaptor

10...........................................................................*3 RCA Component Cable

11. ..............................................................................*Audio Cable RCA/RCA

12.............................................................................................. *12V DC Plug

Composite Video Output

DVD Player, Set-top Box,

HDTV receiver

S-Video Output

1

4

3

2

7

8

Audio Output

6

8

5

+12V Output

9

10 11

12

14

English

Installation

Powering the projector On / Off

Turn on the

projector rst and

then select the

signal sources.

Powering On the Projector

1. Remove the lens cap. 

2. Securely connect the power cord and signal cable. When

connected, the POWER/STANDBY LED will turn Amber.

3. Turn on the lamp by pressing “ ” button either on the top of

the projector or on the remote. The POWER/STANDBY LED

will now turn Green. 

The startup screen will display in approximately 10 seconds.

The rst time you use the projector, you will be asked to

select the preferred language and power saving mode.

4. Turn on and connect the source that you want to display

on the screen (computer, notebook, video player, etc). The

projector will detect the source automatically. If not, push

menu button and go to “OPTIONS”.

Make sure that the “Source Lock” has been set to “Off”.

If you connect multiple sources at the same time, press the

“SOURCE” button on the control panel or direct source keys

on the remote control to switch between inputs.

When Power mode

(Standby) is set

to Eco (<1W), the

VGA output, Audio

pass-through

and RJ45 will be

deactivated when

the projector is in

standby.

Lens Cap

POWER/STANDBY

2

LAMP

TEMP

POWER/STANDBY

MENU

S

O

U

R

C

E

1

15

English

Installation



Contact the

nearest service

center if the

projector displays

these symptoms.

See pages

86-87 for more

information.

Warning Indicator

When the warning indicators (see below) come on,

the projector will automatically shutdown:

 “LAMP” LED indicator is lit red and if “POWER/STANDBY”

indicator ashes amber.

 “TEMP” LED indicator is lit red and if “POWER/STANDBY”

indicator ashes amber. This indicates the projector has

overheated. Under normal conditions, the projector can be

switched back on.

 “TEMP” LED indicator ashes red and if “POWER/STAND-

BY” indicator ashes amber.

Unplug the power cord from the projector, wait for 30 seconds

and try again. If the warning indicator light up again, please

contact your nearest service center for assistance.

Powering Off the Projector

1. Press the “ ” button on the remote control or

on the control panel to turn off the projector.

The following message will be displayed on the screen.

Press the “ ” button again to conrm otherwise the

message will disappear after 15 seconds. When you

press the “ ” button for the second time, the projector will

display countdown timer and will shut down.

2. The cooling fans continue to operate for about 10 seconds

for cooling cycle and the POWER/STANDBY LED will

Flash Green. When the POWER/STANDBY LED lights

solid Amber, the projector has entered standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and

has entered standby mode. Once in standby mode, simply

press “ ” button to restart the projector.

3. Disconnect the power cord from the electrical outlet and

the projector.

4. Do not turn on the projector immediately following a power

off procedure.

16

English

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with elevator feet for adjusting

the image height.

1. Locate the adjustable foot you wish to modify on the

underside of the projector.

2. Rotate the adjustable ring clockwise to raise the projector

or counter clockwise to lower it. Repeat with the remaining

feet as needed.

Tilt-Adjustment Feet

Tilt-Adjustment Ring

17

English

Installation

Adjusting the Projector’s Focus

To focus the image, rotate the focus ring until the image is clear.



XGA series: The projector will focus at distances from 1.64

to 12.46 feet (0.5 to 3.8 meters).



WXGA series: The projector will focus at distances from 1.64

to 11.15 feet (0.5 to 3.4 meters).

Adjusting Projection Image Size



XGA series: Projection Image Size from 41.0” to 312.0” (1.0

to 7.9 meters).



WXGA series: Projection Image Size from 44.6” to 303.0”

(1.1 to 7.7 meters).

Focus Ring

Width

Height

Diagonal

Top View

Side View

Projection Distance (D)

Screen

Screen (W)

Screen (H)

Offset (Hd)

18

English

Installation

 This table is for user’s reference only.

XGA

 This table is for user’s reference only.

WXGA

Diagonal length

(inch) size of

4:3 Screen

Screen Size W x H Projection Distance (D)

Offset (Hd)

(m) (inch) (m) (feet)

Width Height Width Height wide tele wide tele (m) (feet)

40.00 0.81 0.61 31.89 24.02 0.50 0.50 1.64 1.64 0.09 0.30

60.00 1.22 0.91 48.03 35.83 0.80 0.80 2.62 2.62 0.14 0.45

70.00 1.42 1.07 55.91 42.13 0.90 0.90 2.95 2.95 0.16 0.53

80.00 1.63 1.22 64.17 48.03 1.00 1.00 3.28 3.28 0.18 0.60

90.00 1.83 1.37 72.05 53.94 1.10 1.10 3.61 3.61 0.21 0.67

100.00 2.03 1.52 79.92 59.84 1.30 1.30 4.26 4.26 0.23 0.75

120.00 2.44 1.83 96.06 72.05 1.50 1.50 4.92 4.92 0.27 0.90

150.00 3.05 2.29 120.08 90.16 1.90 1.90 6.23 6.23 0.34 1.13

180.00 3.66 2.74 144.09 107.87 2.30 2.30 7.54 7.54 0.41 1.35

250.00 5.08 3.81 200.00 150.00 3.20 3.20 10.50 10.50 0.57 1.87

300.00 6.10 4.57 240.16 179.92 3.66 3.66 12.01 12.01 0.69 2.25

Diagonal length

(inch) size of

16:10 Screen

Screen Size W x H Projection Distance (D)

Offset (Hd)

(m) (inch) (m) (feet)

Width Height Width Height wide tele wide tele (m) (feet)

40.00 0.86 0.54 33.86 21.26 0.40 0.40 1.31 1.31 0.07 0.22

60.00 1.29 0.81 50.79 31.89 0.70 0.70 2.30 2.30 0.10 0.33

70.00 1.51 0.94 59.45 37.01 0.80 0.80 2.62 2.62 0.12 0.38

80.00 1.72 1.08 67.72 42.52 0.90 0.90 2.95 2.95 0.13 0.44

90.00 1.94 1.21 76.38 47.64 1.00 1.00 3.28 3.28 0.15 0.49

100.00 2.15 1.35 84.65 53.15 1.10 1.10 3.61 3.61 0.17 0.55

120.00 2.58 1.62 101.57 63.78 1.30 1.30 4.26 4.26 0.20 0.66

150.00 3.23 2.02 127.17 79.53 1.70 1.70 5.58 5.58 0.25 0.82

180.00 3.88 2.42 152.76 95.28 2.00 2.00 6.56 6.56 0.30 0.98

250.00 5.38 3.37 211.81 132.68 2.80 2.80 9.18 9.18 0.42 1.37

300.00 6.46 4.04 254.33 159.05 3.36 3.36 11.03 11.03 0.50 1.64

19

English

User Controls

Control Panel

Control Panel & Remote Control

LAMP

TEMP

POWER/STANDBY

MENU

S

O

U

R

C

E

Using the Control Panel

POWER

Refer to the “Power On/Off the Projector” section on

pages 14-15.

RE-SYNC

Automatically synchronize the projector to the input

source.

Enter / Help

/

Conrm your item selection.

Help Menu (only available when OSD menu is not

shown).

SOURCE

Press “SOURCE” to select an input signal.

Menu

Press “Menu” to launch the on-screen display

(OSD) menu. To exit OSD, Press “Menu” again.

Four Directional

Select Keys

Use to select items or make adjust-

ments to your selection.

Keystone

Use to adjust image distortion caused

by tilting the projector. (±40 degrees)

Presenter Direct key for LAN/Wireless.

Lamp LED Indicate the projector’s lamp status.

Temp LED Indicate the projector’s temperature status.

POWER/

STANDBY

LED

Indicate the projector’s status.

20

English

User Controls

Remote Control

Using the Remote Control

Power

Refer to the “Power On/Off the Projector”

section on pages 14-15.

L Button

Mouse left click.

R Button

Mouse right click.

Page +

Use this button to page up.

Page -

Use this button to page down.

Enter / Help

Conrm your item selection.

Help Menu (only available when OSD

menu is not shown).

Source

Press “Source” to select an input signal.

Re-SYNC

Automatically synchronizes the projector to

the input source.

Four Directional

Select Keys

Use to select items or make

adjustments to your selection.

Keystone +/-

Adjust image distortion caused by tilting the

projector.

Volume +/-

Adjust to increase / decrease the volume.

Brightness

Adjust the brightness of the image.

3D

Press the “3D” to turn the 3D OSD menu

on/off.

Menu

Press “Menu” to launch the on-screen

display (OSD) menu. To exit OSD, press

“Menu” again.

HDMI

Press “HDMI” to choose HDMI source.

Freeze

Press “Freeze” to pause the screen image.

Press this button again to unlock.

Page is loading ...

Optoma TW610STI+ User manual

This manual is also suitable for

Optoma TW610STI+ User manual

Related papers

Other documents