Costar CDJBD360 Owner's manual

Brand: Costar

Model: CDJBD360

Category: Camera mounting accessories

Type: Owner's manual

CDJBD360 INSTALLATION MANUAL

This manual is intended for users of the CDJBD360 ceiling mounting

bracket.

• This bracket is intended to be used with a specic model of camera.

Do not use it with other models of cameras except for those

approved by the dealer or distributor.

• This installation should be performed by a qualied service

personnel in conformance to all local codes.

• You may need to reinforce the ceiling. If the ceiling is not strong

enough to support the camera, the camera may fall.

• Do not use this product for other purposes.

Mounting

Mount the bracket to the ceiling as follows:

1

Insert cables from external devices, network and

power adapter to the sponge and bracket. If you

have a PT 1/2 inch pipe, remove the PT 1/2 inch cap

and make the cables go through the pipe. Assemble

the removed PT 1/2 inch cap to the bracket's ceiling

hole. Ask your dealer or distributor for details about

connecting a pipe.

2

Mount bracket to the ceiling by using the provided

anchors, rubbers, and screws.

Make sure that a rubber is attached

between bracket and a screw.

Bracket

Rubber

PT 1/2 inch CAP

Ceiling Hole

Connect your camera to the bracket as follows:

3

Screw the camera body onto

bracket.

4

Screw the camera dome

cover onto the camera body.

5

Turn on power.

Bracket

Camera

body

Safety wire

Camera

body

Dome

cover

Safety

wire

Dimensions

Unit: mm (inch)

3 - 120°

Ø 142 (5.59)

3 - M4 TAP

Ø 155 (6.10)

NPT 3/4 inch

33.3 (1.31)

Ver.1.0

1
2

Costar CDJBD360 Owner's manual

Brand: Costar

Model: CDJBD360

Category: Camera mounting accessories

Type: Owner's manual

Related papers

Other documents