Kingston Technology KHX4000LL/1G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX4000LL/1G
Category
Memory modules
Type
Datasheet
Memory Module Specification
Document No. 4804436-001.A00
05/17/06
KHX4000LL/1G
1GB 128M x 64-Bit PC4000
CL3 184-Pin DIMM
KEYED
Page 1
DESCRIPTION:
This document describes Kingston's 128M x 64-bit 1GB (1024MB) PC4000 SDRAM (Synchronous
DRAM) CL3 memory module. The components on this module include sixteen 64M x 8-bit (16M x
8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This module has been tested to run at DDR
500MHz low latency timing of 3-3-3-8-1T at 2.7V. The SPD is programmed to JEDEC standard
latency 400Mhz timing of 3-3-3-8-1T at 2.6V.This 184-pin DIMM uses gold contact fingers and
requires +2.6V. The electrical and mechanical specifications are as follows:
FEATURES:
Power supply : Vdd: 2.6V ± 0.1V, Vddq: 2.6V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 3 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (sequential & interleave)
Timing Reference: 400MHz 3-3-3-8-1T at +2.6V / 500MHz 3-3-3-8-1T at +2.7V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.250” (31.75mm), double sided component
PERFORMANCE:
Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh Row Cycle Time (tRFC) 70ns (min.)
Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)
Power 5.408 W (operating)
UL Rating 94 V - 0
Operating Temperature 0
o
C to 70
o
C
Storage Temperature -55
o
C to +150
o
C
TECHNOLOGY
Kingston Technology
Document No. 4804436-001.A00 Page 2
MODULE DIMENSIONS:
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
For more information, go to www.kingston.com
Tolerances : ± 0.005(.13) unless otherwise specified.
5.25 ± 0.005
5.077
Units : Inches (Millimeters)
0.050
0.0078 ±0.006
(0.20 ±0.15)
0.10 0 Min
(2.30 Min)
0.39 3
(10.00)
(1.270)
0.100
(2.50 )
Detail B
A B
(128.950)
(133.350 ± 0.13)
0.250
(6.350)
Detail A
0.157
(4.00)
0.071
(1.80)
0.039 ± 0.002
(1.000 ± 0.050)
(3.80)
2.175
(6.62)
(64.77) (49.53)
(17.80 )
2.55 1.95
0.26
2.500
0.7
0.10 M
C
BA
0.10
MC BA
M
0.1496
(3.00)
0.118
R (2.00)
0.0787
(4.00)
0.1575
1.25 ± 0.006
(31.75
±0.15)
(4.00)
(2X) 0.157
(3.00)
0.118
  • Page 1 1
  • Page 2 2

Kingston Technology KHX4000LL/1G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX4000LL/1G
Category
Memory modules
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents