Cisco SW-SM-UL-7940 User manual
- Category
- Software licenses/upgrades
- Type
- User manual
This manual is also suitable for
Product End-of-Life Notice
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 3
End-of-Sale and End-of-Life Announcement for the
Cisco Unified IP Phones 7940G and 7960G Third-Party
SIP Firmware
EOL6684
Cisco
®
announces the end-of-sale and end-of life dates for the Cisco Unified IP Phones
7940G and 7960G Third-Party SIP Firmware. The last day to order the affected
product(s) is October 29, 2009. Customers with active service contracts will continue to
receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1
of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for
the affected product(s). Table 2 lists the product part numbers affected by this
announcement. For customers with active and paid service and support contracts,
support will be available until the termination date of the contract, even if this date
exceeds the Last Date of Support shown in Table 1.
Note: This end-of-life and end-of-sale announcement applies to the firmware only, not for the
hardware. This notice does not include SIP firmware that interoperates with Cisco Unified
Communications Manger or Cisco Unified Communications Manager Express.
Table 1. End-of-Life Milestones and Dates for the Cisco Unified IP Phones 7940G and 7960G Third-Party
SIP Firmware
Milestone Definition Date
End-of-Life
Announcement Date
The date the document that announces the end of sale and end of life of a
product is distributed to the general public.
April 30, 2009
End-of-Sale Date The last date to order the product through Cisco point-of-sale mechanisms.
The product is no longer for sale after this date.
October 29, 2009
Last Ship Date:
App. SW
The last-possible ship date that can be requested of Cisco and/or its contract
manufacturers. Actual ship date is dependent on lead time.
January 27, 2010
End of SW Maintenance
Releases Date:
App. SW
The last date that Cisco Engineering may release any final software
maintenance releases or bug fixes. After this date, Cisco Engineering will no
longer develop, repair, maintain, or test the product software.
October 29, 2010
End of New Service
Attachment Date:
App. SW
For equipment and software that is not covered by a service-and-support
contract, this is the last date to order a new service-and-support contract or
add the equipment and/or software to an existing service-and-support
contract.
October 29, 2010
End of Service Contract
Renewal Date:
App. SW
The last date to extend or renew a service contract for the product. January 25, 2012
Last Date of Support:
App. SW
The last date to receive service and support for the product. After this date,
all support services for the product are unavailable, and the product becomes
obsolete.
October 28, 2012
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product
Part Number
Product Description Replacement Product Part Number Replacement Product
Description
CP-7940G-SP Cisco IP Phone 7940G SP
Bundle
See the Product Migration Options
section below for detailed information
on replacing this product.
Product End-of-Life Notice
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 3
CP-7960G-SP Cisco IP Phone 7960G SP
Bundle
See the Product Migration Options
section below for detailed information
on replacing this product.
SW-SM-UL-7940 Cisco and 3PCC SIP and MGCP
license for single 7940 IP phone
See the Product Migration Options
section below for detailed information
on replacing this product.
SW-SM-UL-7940= Cisco and 3PCC SIP and MGCP
license for single 7940 IP phone
See the Product Migration Options
section below for detailed information
on replacing this product.
SW-SM-UL-7960 SIP and MGCP license for single
7960 IP phone
See the Product Migration Options
section below for detailed information
on replacing this product.
SW-SM-UL-7960= Cisco and 3PCC SIP and MGCP
license for single 7960 IP phone
See the Product Migration Options
section below for detailed information
on replacing this product.
Product Migration Options
Customers are encouraged to migrate to the Cisco SPA525G five-line IP phone with color display.
Information about this product can be found at:
http://www.cisco.com/en/US/products/ps10067/index.html.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive
credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to:
http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a
Cisco.com user ID.
Service prices for Cisco products are subject to change after the product End of Sale date.
For More Information
For more information about the Cisco SPA525G five-line IP phone with color display, visit
http://www.cisco.com/en/US/products/ps10067/index.html, or contact your local account
representative.
To request information about the Cisco SPA525G five-line IP phone with color display, send an e-
mail to sbcs-interest@cisco.com.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.
Product End-of-Life Notice
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 3
Printed in USA C51-526372-00 03/09
-
1
-
2
-
3
Cisco SW-SM-UL-7940 User manual
- Category
- Software licenses/upgrades
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Cisco CP-7940 Datasheet
-
-
Cisco CP-7960G Datasheet
-
-
-
-
-
-
-
Other documents
-
Cisco Systems 7940G User manual
-
Cisco Systems OL-15499-01 User manual
-
-
-
-
-
-
-
-