Haier HWR06XCJ User manual

Page is loading ...

2 3

TABLE OF CONTENTS

ÍNDICE

TABLE DES MATIÈRES

AIR CONDITIONER SAFETY ........................................................3

INSTALLATION REQUIREMENTS.................................................3

Tools and Parts ............................................................................3

Location Requirements ...............................................................4

Electrical Requirements ...............................................................4

INSTALLATION INSTRUCTIONS...................................................5

Unpack the Air Conditioner..........................................................5

Prepare Air Conditioner for Installation........................................5

Prepare Window for Installation...................................................6

Position Air Conditioner ..............................................................7

Complete Installation ..................................................................8

AIR CONDITIONER USE...............................................................9

Starting Your Air Conditioner .......................................................9

Using the Remote Control...........................................................11

Changing Air Direction ................................................................12

Normal Sounds............................................................................12

AIR CONDITIONER CARE ...........................................................12

Cleaning the Air Filter .................................................................12

Cleaning the Front Panel.............................................................12

Annual Maintenance....................................................................13

TROUBLESHOOTING ..................................................................13

ASSISTANCE OR SERVICE..........................................................15

In the U.S.A. ...............................................................................15

In Canada ...................................................................................15

WARRANTY ..................................................................................16

SEGURIDAD DEL ACONDICIONADOR DE AIRE......................17

REQUISITOS DE INSTALACIÓN.................................................17

Herramientas y piezas................................................................17

Requisitos de ubicación.............................................................18

Requisitos eléctricos..................................................................18

INSTRUCCIONES DE INSTALACIÓN.........................................19

Desempaque el acondicionador de aire....................................19

Prepare el acondicionador de aire para la instalación ..............20

Preparación de la ventana para la instalación............................20

Coloque el acondicionador de aire en su lugar..........................21

Complete la instalación..............................................................22

CÓMO USAR EL ACONDICIONADOR DE AIRE .......................23

Cómo poner en marcha su acondicionador de aire...................23

Cómo usar el control remoto .....................................................25

Cómo cambiar la dirección del aire ...........................................26

Sonidos normales.......................................................................26

CUIDADO DE SU ACONDICIONADOR DE AIRE.......................26

Limpieza del ltro de aire ...........................................................26

Limpieza del panel frontal ..........................................................26

Mantenimiento anual..................................................................26

SOLUCIÓN DE PROBLEMAS......................................................27

AYUDA O SERVICIO TÉCNICO...................................................28

En los EE.UU. .............................................................................28

En los C ANA DÁ

. .........................................................................28

GARANTÍA.....................................................................................29

SÉCURITÉ DU CLIMATISEUR ...................................................31

EXIGENCES D’INSTALLATION...................................................31

Outillage et pièces......................................................................31

Exigences d’emplacement.........................................................32

Spécications électriques .........................................................32

INSTRUCTIONS D’INSTALLATION ............................................33

Déballage du climatiseur............................................................33

Préparer le climatiseur pour l’installation...................................34

Préparation de la fenêtre pour l’installation ...............................34

Positionnement du climatiseur...................................................35

Achever l’installation ..................................................................36

UTILISATION DU CLIMATISEUR................................................37

Mise en marche du climatiseur...................................................37

Utilisation de la télécommande...................................................39

Changement de direction de l’air.................................................40

Sons normaux ............................................................................40

ENTRETIEN DU CLIMATISEUR...................................................40

Nettoyage du ltre à air ..............................................................40

Nettoyage du panneau avant.....................................................40

Entretien annuel..........................................................................40

DÉPANNAGE.................................................................................41

ASSISTANCE OU SERVICE.........................................................42

Aux États-Unis............................................................................42

Au Canada..................................................................................42

GARANTIE.....................................................................................43

AIR CONDITIONER SAFETY

INSTALLATION REQUIREMENTS

Tools and Parts

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:

SAVE THESE INSTRUCTIONS

Unplug air conditioner before servicing.

Use two or more people to move and install air conditioner.

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

A

B

C

D

E

F

G

H

I

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

Tools needed

A. Top channel

B. Foam seal

C. Side brackets (2)

D.Window lock bracket

E. ⁄” screws(3)

F. ⁄” screws (9)

G. Side curtains (2)

H. Side curtain frames (2)

I. Remote control

Parts supplied:

Check that all parts are included in parts package.

■ Phillips head screwdriver

■ Flat-blade screwdriver

■ Scissors

■ Level

■ Socket wrench and sockets

■ Tape measure

■ Cordless drill and 1/8” bit

■ Pencil

■ Pliers

■ Adjustable wrench

2 3

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Check the location where the air conditioner will be installed.

Make sure you have everything necessary for correct installation.

The location should provide:

■ Grounded electrical outlet within 6 ft (183 cm) of where the

power cord exits the air conditioner.

NOTE: Do not use an extension cord.

■ Free movement of air in room to be cooled.

■ A large enough opening for the air conditioner. Installation

parts are supplied for double-hung windows.

■ Adequate wall support for weight of air conditioner. Air

conditioner weighs 42 lbs to 46 lbs (19 kg to 20.9 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able

to pass freely through the cabinet louvers.

The electrical ratings for your air conditioner are listed on the

model and serial number label. The model and serial number

label is located either on the side or back of the air conditioner

cabinet or behind the front grille.

Specic electrical requirements are listed in the chart below.

Follow the requirements for the type of plug on the power supply

cord.

This air conditioner must be grounded. This air conditioner is

equipped with a power supply cord having a 3 prong grounding

plug. The cord must be plugged into a mating, grounded 3 prong

outlet, grounded in accordance with all local codes and

ordinances. If a mating outlet is not available, it is the customer’s

responsibility to have a properly grounded 3 prong outlet installed

by a qualied electrical installer.

It is the customer’s responsibility:

■ To contact a qualied electrical installer.

■ 115-volt (103.5 min. to 126.5 max.)

■ 0 to 12 amps

■ 15-amp time-delay fuse or circuit

breaker

■ Use on single outlet circuit only.

Electrical Requirements

A. Cabinet louvers

Window Installation

Recommended Grounding Method

Power Supply

Cord Wiring Requirements

A

B

4 5

A. 22” (55.9 cm) minimum

B. 13⁄” (34 cm) minimum

Window opening measurements:

■ 22” minimum to 36” (55.9 cm to 91.4 cm) maximum opening

width.

■ 13⁄” (34 cm) minimum opening height.

NOTE: Your air conditioner’s device may differ from the one

shown.

This room air conditioner is equipped with a power supply cord

required by UL. This power supply cord contains state-of-the-art

electronics that sense current leakage. If the cord is crushed, the

electronics detect current leakage and power will be

disconnected in a fraction of a second.

Remove Packaging Materials

■ Remove and dispose of/recycle packaging materials. Remove tape

and glue residue from surfaces before turning on the air

conditioner. Rub a small amount of liquid dish soap over the

adhesive with your ngers. Wipe with warm water and dry.

■ Do not use sharp instruments, rubbing alcohol, ammable

uids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your air conditioner.

■ Handle the air conditioner gently.

To test your power supply cord:

1. Plug power supply cord into a grounded 3 prong outlet.

2. Press RESET (on some devices, a green light will turn on).

3. Press TEST (listen for click; Reset button will trip, and on

some devices, a green light will turn off).

4. Press and release RESET (listen for click; Reset button will

latch, and on some devices, a green light will turn on). The

power supply cord is ready for operation.

NOTES:

■ The Reset button must be pushed in for proper operation.

■ The power supply cord must be replaced if it fails to trip when

the test button is pressed or fails to reset.

■ Do not use the power supply cord as an off/on switch.

■ A damaged power supply cord must be replaced with a new

power supply cord obtained from the product manufacturer

and must not be repaired.

■ The power supply cord contains no user serviceable parts.

Opening the tamper-resistant case voids all warranty and

performance claims.

A. Test button

B. Reset button

Power Supply Cord

Install Top Channel

INSTALLATION INSTRUCTIONS

Unpack the Air Conditioner Prepare Air Conditioner for Installation

TEST

RESET

A

B

4 5

1. Place the top channel on the top of the air conditioner, lining up

the holes in the top channel with the holes in the top of the air

conditioner.

2. Using three ⁄” screws, attach the top channel to the air

conditioner.

B

A

B

NOTE: Your model may differ from the one shown.

NOTE: Attach curtains to the air conditioner before placing the air

conditioner in window.

1. Place the tabbed side of the side curtain in the track on the

right-hand side of the air conditioner cabinet.

3. Slide the side curtain frame into the top channel on the top

of the air conditioner and the track on the bottom of the air

conditioner.

4. Slide the side curtain frame as close to the air conditioner

as necessary to lock the side curtain to the frame.

5. Repeat above steps for the left-hand side curtain and

frame.

Prepare Window for Installation

1. Measure the width of the window opening.

2. Mark the center line on the inside windowsill.

A. ⁄” screws

B. Top channel

A. Tabbed side of side curtain

B. Lock edge side of side curtain

A. Width of window opening

B. Center line

2. Slide the side curtain down the track until the curtain is

aligned with the top and bottom of the air conditioner

cabinet.

Install Side Curtains

6 7

A

B

3. Slide the side bracket over the screw.

4. Tighten the screw. The side bracket should be resting on the

windowsill.

5. Use ⁄” drill bit to drill a starter hole through the holes in the

side bracket and windowsill.

6. Using two ⁄” screws, attach the side bracket to the

windowsill.

7. Repeat for side bracket installation on the left-hand side of

the air conditioner.

2. Loosen the screw on the right-hand side of the air conditioner

cabinet near the bottom.

1. Pull the left-hand curtain out until it ts into the window

channel.

2. Use a ⁄” drill bit to drill a starter hole through the top hole in

the side curtain and into the window sash.

3. Insert one of the ⁄” screws through the top hole of the

lefthand curtain and into the window sash.

4. Repeat for the right-hand curtain.

A. Side curtain against window channel

B. Window sash behind top channel

C. Bottom channel in behind windowsill

Position Air Conditioner

Attach Side Curtains to Window

6 7

NOTES:

■ Handle the air conditioner gently.

■ Be sure your air conditioner does not fall out of the opening

during installation or removal.

■ The place where the power cord exits the air conditioner should

be no more than 6 ft (183 cm) from a grounded outlet.

■ Do not block the louvers in the front panel.

■ Do not block the louvers on the outside of the air conditioner.

1. Center the air conditioner in the window. Lower the window

sash behind the top channel to hold the cabinet in place

NOTE: Your model may differ from the one shown.

A

B

C

A

B

Top View

Bottom View

Complete Installation

1. Insert the foam seal behind the top of the lower window sash

and against the glass of the upper window.

A. Top of lower window sash

B. Foam seal

5. Use a ⁄” drill bit to drill a starter hole through the bottom hole

in the side curtain and into the window frame.

6. Insert one of the ⁄” screws through the bottom hole of the

left-hand curtain and into the window frame.

7. Repeat for the right-hand curtain.

2. Place the window lock bracket as shown. Use a ⁄” drill bit to

drill a starter hole through the hole in the window lock bracket

and into the upper window.

3. Attach the window lock bracket to the upper window with one

⁄” screw to secure the window in place.

4. Plug into a grounded 3 prong outlet.

5. Press RESET on the power supply cord. See “Electrical

Requirements.”

8 9

1. Remove the clear plastic lm from the control panel.

2. Press POWER to turn on the air conditioner. The Power

indicator light will turn on.

NOTE: When the air conditioner is plugged in, the LED display

will show “88” for 3 seconds. After the air conditioner is turned

on for the rst time, the display will show the current room

temperature and the fan is set to Low speed. When the air

conditioner is turned on at all other times, the display will show

the previous settings for 5 seconds, and then show the current

room temperature.

3. Select mode. See “Mode.”

4. Select fan speed. See “Fan Speed.”

5. Set temperature. See “Temperature.”

1. Press MODE until you see the indicator light glow for the

desired setting.

2. Choose Fan, Cool, Energy Saver or Dehum.

■ Fan—Only the fan runs. Press SPEED to select High, Med

or Low fan speed. The display shows the current room

temperature.

■ Cool—Cools the room. Press SPEED to select High, Med or

Low fan speed. Press the TEMP/TIME up or down

arrow button to adjust the temperature.

■ Energy Saver—Fan runs only when cooling is needed. Press

SPEED to select High, Med or Low fan speed.

Because the fan does not circulate the room air continuously,

less energy is used, but the room air is not circulated as often.

■ Dehum—Dries the room. The air conditioner automatically

selects the temperature. Fan runs on Low speed only.

NOTE: Dehum mode should not be used to cool the room.

NOTE: After 5 seconds, display will show the current room

temperature.

NOTE: In Dehum mode, the Speed button will not operate.

1. Press FAN SPEED until you see the indicator light glow for

the desired setting.

2. Choose High, Med or Low.

■ High—for maximum cooling

■ Med—for normal cooling

■ Low—for minimum cooling

NOTE: After 5 seconds, the display will show the current room

temperature.

Operating your air conditioner properly helps you to obtain the

best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

■ If you turn off the air conditioner, wait at least 3 minutes before

turning it back on. This keeps the air conditioner from blowing a

fuse or tripping a circuit breaker.

■ Do not try to operate your air conditioner in the Cool mode when

outside temperature is below 61°F (16°C). The inside evaporator

coil will freeze up, and the air conditioner will not operate prop-

erly.

NOTE: In the event of a power failure, your air conditioner will

operate at the previous settings when the power is restored.

AIR CONDITIONER USE

Starting Your Air Conditioner

Mode

Fan Speed

10 11

■ Press the TEMP/TIME up arrow button to raise the

temperature. Each time you press or hold the TEMP/TIME up

arrow button, the temperature will go up 1ºF until it reaches

86°F (30°C).

NOTE: After 5 seconds, the display will show the current room

temperature.

■ Press the TEMP/TIME down arrow button to lower the

temperature. Each time you press or hold the TEMP/TIME

down arrow button, the temperature will go down 1ºF until it

reaches 61°F (16°C).

NOTE: After 5 seconds, the display will show the current room

temperature.

To set the Timer for a 1-hour to 24-hour delay until the air

conditioner turns off (the air conditioner must be On):

1. Press TIMER. Timer On indicator light will ash. Display will

show remaining hours before the air conditioner will turn off.

2. Press the TEMP/TIME up or down arrow button to change the

delay time from 1 hour to 24 hours.

3. After 5 seconds, Timer On indicator light will remain on.

Display will show the current room temperature.

To set the Timer to turn on the air conditioner, keeping

previous settings:

1. Turn on the air conditioner.

2. Press TIMER. Timer On indicator light will ash. Display will

show remaining hours before the air conditioner will turn on.

3. Press the TEMP/TIME up or down arrow button to change the

delay time from 1 hour to 24 hours.

4. After 5 seconds, Timer On indicator light will remain on.

Display will show the current room temperature.

To set the Timer to turn on the air conditioner, changing

the previous settings:

1. Turn on the air conditioner.

2. Adjust the mode to Fan, Cool, Energy Saver or Dehum.

3. For Fan, Cool or Energy Saver mode, adjust the fan speed to

High, Med or Low.

NOTE: In Dehum mode, the Speed button will not operate.

4. Adjust the temperature between 61ºF and 86ºF (16ºC and

30ºC).

NOTE: In Fan mode, the temperature cannot be set.

5. Wait 3 seconds before turning off the air conditioner.

6. Press TIMER. Timer On indicator light will ash. Display will

show remaining hours before the air conditioner will turn on.

7. Press the TEMP/TIME up or down arrow button to change the

delay time from 1 hour to 24 hours.

8. After 5 seconds, Timer On indicator light will remain on. Dis-

play will show the current room temperature.

To clear Timer delay program:

NOTE: Air conditioner can be either on or off.

1. Press TIMER once after it has been programmed. Display will

show remaining time.

2. While the display is showing the remaining time, press TIMER

again. Timer Off indicator light will turn on.

To see or change the remaining time (in hours):

1. Press TIMER once after it has been programmed. Display will

show remaining time.

2. While the display is showing the remaining time, press the up

or down TEMP/TIME button to increase or decrease the time.

3. After 5 seconds, the display will show the current room

temperature.

Temperature

Timer Delay

10 11

To set the Timer for a 1-hour to 24-hour delay before the

air conditioner is turned off (the air conditioner must be

On):

1. Press TIMER. Timer On indicator light on the air conditioner

control panel will ash.

2. Press the TEMP/TIME up or down arrow button to change the

delay time from 1 hour to 24 hours.

3. After 5 seconds, Timer On indicator light on the air conditioner

control panel will remain on.

To set Timer to turn on the air conditioner, keeping

previous settings:

1. Turn on the air conditioner.

2. Press TIMER. Timer On indicator light on the air conditioner

control panel will ash.

3. Press the TEMP/TIME up or down arrow button to change the

delay time from 1 hour to 24 hours.

4. After 5 seconds, Timer On indicator light on the air

conditioner control panel will remain on.

To set Timer to turn on the air conditioner, changing the

previous settings:

1. Turn on the air conditioner.

2. Adjust the mode to Fan, Cool, Energy Saver or Dehum.

3. For Fan, Cool or Energy Saver mode, adjust the fan speed to

High, Med or Low.

NOTE: In Dehum mode, the Speed button will not operate.

NOTE: Remote control may differ in appearance.

NOTE: One CR2025 battery (included) powers the remote

control. Replace battery after 6 months of use, or when the

remote control starts to lose power.

Press ON/OFF to turn on the air conditioner.

Press MODE to choose Fan, Cool, Energy Saver or Dehum.

Press SPEED to choose High, Med or Low.

Power

Temperature

Timer

■ Press the TEMP/TIME up arrow button to raise the

temperature. Each time you press or hold the TEMP/TIME up

arrow button, the temperature will go up 1ºF until it reaches

86°F (30°C).

■ Press the TEMP/TIME down arrow button to lower the

temperature. Each time you press or hold the TEMP/TIME

down arrow button, the temperature will go down 1ºF until it

reaches 61°F (16°C).

Mode

Speed

Using the Remote Control

A

B

A

4. Adjust the temperature between 61ºF and 86ºF (16ºC and

30ºC).

NOTE: In Fan mode, the temperature cannot be set.

5. Wait 3 seconds before turning off the air conditioner.

6. Press TIMER. Timer On indicator light on the air conditioner

control panel will ash. Display will show remaining hours

before the air conditioner will turn on.

7. Press the TEMP/TIME up or down arrow button to change

the delay time from 1 hour to 24 hours.

8. After 5 seconds, Timer On indicator light on the air

conditioner control panel will remain on. Display will show the

current room temperature.

To clear Timer delay program:

NOTE: Air conditioner can be either on or off.

1. Press TIMER once after it has been programmed. Display on

the air conditioner control panel will show remaining time.

2. While the display is showing the remaining time, press

TIMER again. Timer Off indicator light will turn on.

To see or change the remaining time (in hours):

1. Press TIMER once after it has been programmed. Display on

the air conditioner control panel will show remaining time.

2. While the display is showing the remaining time, press

the TEMP/TIME up or down arrow button to increase or

decrease the time.

3. After 5 seconds, the display on the air conditioner control

panel will show the current room temperature.

Your new air conditioner is designed to give you many years of

dependable service. This section tells you how to clean and care

for your air conditioner properly.

The air lter is removable for easy cleaning. A clean lter helps

remove dust, lint, and other particles from the air and is

important for best cooling and operating efciency. Check the

lter every 2 weeks to see whether it needs cleaning.

NOTE: Do not operate the air conditioner without the lter in

place.

1. Turn off the air conditioner.

2. Remove the air lter by opening the front panel and removing

the air lter.

When your air conditioner is operating normally, you may hear

sounds such as:

■ Droplets of water hitting the condenser, causing a pinging or

clicking sound. The water droplets help cool the condenser.

■ Air movement from the fan.

■ Clicks from the thermostat cycle.

■ Vibrations or noise due to poor wall or window construction.

■ A high-pitched hum or pulsating noise caused by the modern

high-efciency compressor cycling on and off.

Normal Sounds

Cleaning the Air Filter

AIR CONDITIONER CARE

A. Air lter

B. Front panel

A. 2-Way Air Flow

12 13

Changing Air Direction

2-Way Air Flow:The air directional louvers let you control the

direction of the airow to the desired direction.The airow can be

directed left-right.

1. Turn off the air conditioner.

2. Clean the front panel with a soft, damp cloth.

3. Air dry the front panel completely.

4. Turn on the air conditioner.

■ The power supply cord has tripped (Reset button has

popped out). Press and release RESET (listen for click; Reset

button will latch and on some devices, a green light will turn on)

to resume operation.

■ A household fuse has blown, or circuit breaker has

tripped. Replace the fuse or reset the circuit breaker. If the

problem continues, call an electrician. See “Electrical

Requirements.”

■ The Power button has not been pressed or the Mode

control knob is turned to Off. Press POWER or turn the

Mode control knob to an active setting.

■ The local power has failed. Wait for power to be restored.

■ Too many appliances are being used on the same circuit.

Unplug or relocate appliances that share the same circuit.

■ Time-delay fuse or circuit breaker of the wrong capacity

is being used. Replace with a time-delay fuse or circuit

breaker of the correct capacity. See “Electrical

Requirements.”

Before calling for service, try the suggestions below to see whether you can solve your problem without outside help.

3. Use a vacuum cleaner to clean air lter. If the air lter is very

dirty, wash it in warm water with a mild detergent. Do not

wash the air lter in the dishwasher or use any chemical

cleaners. Air dry the air lter completely before replacing to

ensure maximum efciency.

4. Replace the air lter.

5. Close the front panel.

6. Turn on the air conditioner.

Cleaning the Front Panel

Air Conditioner Will Not Operate

Air conditioner blows fuses or trips circuit breakers

■ The power supply cord is unplugged. Plug into a grounded

3 prong outlet. See “Electrical Requirements.”

12 13

TROUBLE SHOOTING

Your air conditioner needs annual maintenance to help ensure

steady, top performance throughout the year. Call your local

authorized dealer to schedule an annual checkup. The expense

of an annual inspection is your responsibility.

Annual Maintenance

■ Disturbances in your electrical current can trip (Reset

button will pop out) the power supply cord. Press and

release RESET (listen for click; Reset button will latch and on

some devices, a green light will turn on) to resume operation.

■ Electrical overloading, overheating, cord pinching or aging

can trip (Reset button will pop out) the power supply cord.

After correcting the problem, press and release RESET (listen

for click; Reset button will latch and on some devices, a green

light will turn on) to resume operation.

NOTE: A damaged power supply cord must be replaced with a

new power supply cord obtained from the product manufacturer

and must not be repaired.

■ The air conditioner is not properly sized for your room.

Check the cooling capabilities of your room air conditioner.

Room air conditioners are not designed to cool multiple rooms.

■ The lter is dirty or obstructed by debris. Clean the lter.

■ There is excessive heat or moisture (open container

cooking, showers, etc.) in the room. Use a fan to exhaust

heat or moisture from the room. Try not to use heatproducing

appliances during the hottest part of the day.

■ The louvers are blocked. Install the air conditioner in a

location where the louvers are free from curtains, blinds,

furniture, etc.

■ The outside temperature is below 61°F (16°C). Do not try to

operate your air conditioner in the cooling mode when the out-

side temperature is below 61°F (16°C).

■ The temperature of the room you are trying to cool is

extremely hot. Allow extra time for the air conditioner to cool

off a very hot room.

■ Windows or doors to the outside are open. Close all

windows and doors.

■ The Temperature control is not at a cool enough setting.

Adjust the TEMP/TIME control to a cooler setting by

pressing the minus button to reduce the temperature. Set the

Fan Speed control to the highest setting.

■ The current air conditioner replaced an older model. The

use of more efcient components may cause the air conditioner

to run longer than an older model, but the total energy

consumption will be less. Newer air conditioners do not emit

the “blast” of cold air you may be accustomed to from older

air conditioners, but this is not an indication of lesser cooling

capacity or efciency. Refer to the efciency rating (EER) and

capacity rating (in Btu/h) marked on the air conditioner.

■ The air conditioner is in a heavily occupied room, or

heatproducing appliances are in use in the room. Use

exhaust vent fans while cooking or bathing and try not to use

heatproducing appliances during the hottest part of the day. A

higher capacity air conditioner may be required, depending on

the size of the room being cooled.

■ The air conditioner is not properly leveled. The air conditioner

should slope slightly downward toward the outside. Level the

air conditioner to provide a downward slope toward the

outside to ensure proper drainage. See the Installation

Instructions.

NOTE: Do not drill a hole into the bottom of the metal base

and condensate pan.

■ An extension cord is being used. Do not use an extension

cord with this or any other appliance.

■ You are trying to restart the air conditioner too soon after

turning off the air conditioner. Wait at least 3 minutes after

turning off the air conditioner before trying to restart the air

conditioner.

Air conditioner power supply cord trips (Reset button

pops out)

Air conditioner cycles on and off too much or does not

cool room in cooling mode

Air conditioner seems to run too much

Water drips from cabinet into your house

14 15

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only factory-specied replacement parts. Factory-specied

replacement parts will t right and work right because they are

made with the same precision used to build every new appliance.

To locate factory-specied replacement parts in your area, call

your nearest designated service center.

Please record your model’s information.

Whenever you call to request service on your appliance, you

need to know your complete model number and serial number.

Visit www.haieramerica.com or call Haier America toll

free: 1-877-337-3639.

Our consultants provide assistance with:

■ Features and specications on our appliances.

■ Installation information.

■ Use and maintenance procedures.

■ Repair parts sales.

■ Referrals to repair parts distributors, and service companies.

Manufacturer-authorized service technicians are trained to

fulll the product warranty and provide after-warranty service,

anywhere in the United States.

Visit www.haieramerica.com or call Haier America toll

free: 1-877-337-3639.

Our consultants provide assistance with:

■ Features and specications on our appliances.

■ Installation information.

■ Use and maintenance procedures.

■ Repair parts sales.

■ Referrals to repair parts distributors, and service companies.

Manufacturer-authorized service technicians are trained to

fulll the product warranty and provide after-warranty service,

anywhere in the Canada.

For Further Assistance

If you need further assistance, you can write with any questions

or concerns to:

Haier America

1356 Broadway

New York, NY 10018

Please include a daytime phone number in your correspondence.

For Further Assistance

If you need further assistance, you can write with any questions

or concerns to:

Haier America

1356 Broadway

New York, NY 10018

Please include a daytime phone number in your correspondence.

You can nd this information on the model and serial number

label. See “Electrical Requirements” for the location of the model

and serial number label.

Please record the model and serial number information below.

Also, record the purchase date of your appliance and the store’s

name, address, and telephone number.

Model Number________________________________________

Serial Number ________________________________________

Purchase Date________________________________________

Store Name __________________________________________

Store Address ________________________________________

Store Phone _________________________________________

Keep this book and the sales slip together for future reference.

In the U.S.A.

In Canada

14 15

16

ONE YEAR LIMITED WARRANTY

This warranty covers all defects in workmanship or material for the mechanical and electrical parts (including labor costs) contained in

this product for a period of 12 months from the date of purchase. For commercial or rental application, the warranty is 90 days. You

must keep and be able to provide your original sales receipt as proof of the date of purchase.

FIVE YEAR LIMITED WARRANTY ON THE SEALED SYSTEM

The sealed system and compressor (hermetic compressor, condenser and evaporator) contained in this product is for a period of 5 years

from the date of purchase (excluding labor costs after the initial 12-month period). In commercial or rental use, the additional limited

compressor warranty is for 1 year and 9 months (excluding labor costs after the initial 90-day period). You must keep and be able to provide

your original sales receipt as proof of the date of purchase.

WHO IS COVERED

The original retail purchaser of this product.

WHAT WILL BE DONE

Haier America will repair or replace any mechanical, electrical part or the compressor, which proves defective in normal household use

for a period of 12 months. Haier America will repair or replace (excluding labor costs) the sealed system and compressor (parts only) for

an additional 4-year period.

HOW CAN YOU GET SERVICE

Contact your nearest manufacturer-authorized Service Depot. For the name of the Service Depot nearest you, contact Haier America at

1-877-337-3639.

All service must be performed by a manufacturer-authorized Service Depot.

THIS WARRANTY DOES NOT COVER

1. Damages from improper installation.

2. Damages in shipping.

3. Defects other than manufacturing.

4. Damages from misuse, abuse, accident, alteration, lack of proper care and maintenance or incorrect current or voltage.

5. Damage from other than household use.

6. Damages from service by other than an authorized dealer or service center.

7. Decorative trims or replaceable light bulbs.

8. Labor, service, transportation and shipping charges for the removal of defective parts and installation of replacement parts beyond

the initial 12-month period.

9. Credit or refund for products over 30 days past date of purchase, or for any loss or injury caused by the product or defects to the

product including but not limited to incidental or consequential damages.

10. Food loss for food spoiled as a direct result of mechanical failure of a product or of any delay in providing service, repair or

replacement.

11. Refurbished product purchased as/like new or second-hand.

THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. This warranty does not cover incidental or

consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so this limitation may not

apply to you. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. This

warranty gives you specic legal rights and you may also have other rights which vary from state to state.

This warranty covers units within the continental United States, Canada and Puerto Rico.

LIMITED WARRANTY

Page is loading ...

Haier HWR06XCJ User manual

This manual is also suitable for

Haier HWR06XCJ User manual

in other languages

Related papers

Other documents