Zelmer ZFP1100C User manual

Page is loading ...

42

ZFP1100-001_v02

Dear Customer!

Congratulations on your choice of our appliance and

welcome among the users of Zelmer appliances!

For best results we recommend using original Zelmer

accessories only. They have been designed specically for

this product.

Please carefully read this manual. Pay special attention

to important safety instructions. Keep these operating

instructions for future reference.

Safety precautions and proper use

Please read the entire manual before using this

appliance.

● Turn off the appliance after use.

Do remove the attachments until the

motor and all moving parts of the

appliance have completely stopped.

● Do not remove the bowl lid when the

appliance is in operation.

● Avoid contact with moving parts.

Keep your hands, hair, clothing and

kitchen equipment (e.g. spatulas,

spoons) away from the moving parts

to avoid risk of injury to persons and/

or equipment damage.

● Be careful when using the appliance

around children.

● This appliance shall not be used by

children. Keep the appliance and its

power cord out of reach of children.

● This appliance can be used by

children aged from 8 years and above

if they have been given supervision

or instruction concerning use of the

appliance in a safe way and if they

understand the hazards involved.

Cleaning and user maintenance shall

not be made by children unless they

are aged from 8 years and above

and supervised. Keep the appliance

and its cord out of reach of children

aged less than 8 years.

● Appliances can be used by persons

with reduced physical, sensory

or mental capabilities or lack of

experience and knowledge if they

have been given supervision or

instruction concerning use of

the appliance in a safe way and

understand the hazards involved.

● Children shall not play with the

appliance.

● Do not place the appliance on a wet

surface.

DANGER! / CAUTION!

Failure to follow safety

recommendations may result in

injury

● Do not operate the appliance if its

power cord, housing or the handle

are damaged.

● If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly qualied

persons in order to avoid a hazard.

● The appliance should be repaired

by trained staff only. Improper repair

may result in a serious hazard to

the user. In case of defects, please

contact a qualied service centre.

● Turn off the appliance and unplug it

from wall outlet before approaching

the moving parts or changing the

accessories.

● Always disconnect the appliance

from the supply if it is left unattended

and before assembling, disassembling

or cleaning.

● Before turning on the appliance,

make sure that the bowl lid is

properly put in place.

● Before use, make sure there are no

hard objects in the bowl (e.g. spoon).

EN

43

ZFP1100-001_v02

● Keep the appliance and the power

cord away from hobs and burners.

● Do not insert hard objects (spoon,

spatula, etc.) into the bowl during

operation.

● The use of accessories other

than those recommended by the

manufacturer may cause re, electric

shock or injury.

NOTE!

Failure to observe these guidelines

may result in damage to property

●

Do not unplug the appliance by pulling the cord.

●

Place the motor unit near the socket on a hard stable

surface, so as not to obstruct the ventilation holes in

the housing.

●

Always connect the appliance to the power outlet

(alternating current only) with voltage matching that

indicated on the name plate.

●

Do not immerse the appliance motor unit in water,

or wash it under running water.

●

Do not use strong detergents such as emulsions,

pastes, etc. to clean the housing. They might for

example remove graphic symbols, such as: marks,

warning signs, etc.

●

Urządzenie powinno być użytkowane tylko wewnątrz

The appliance shall only be used indoors.

The appliance meets the requirements of the directives:

– Electrical equipment designed for use within specic

voltage limits (LVD) – 2006/95/EC.

– Electromagnetic compatibility (EMC) – 2004/108/EC.

The product is marked with

marking on the rating plate.

For

declaration of conformity please visit the

manufacturer's website at www.zelmer.pl

Features and components

1

Release / lock button of the motor unit rotating head

2

Motor unit rotating head

3

Speed control knob

4

Bowl lid with feeder

5

Stainless steel bowl

6

Base

7

Whisk

8

Flat beater

9

Mixing hook

Prepare the appliance for operation

BEFORE FIRST USE:

1

Before use, remove all packaging, plastic bags, etc.

2

Before using the appliance, wash the whisk, attachments

and stainless steel bowl in warm water with detergent or in

a dishwasher. Carefully dry all the items (see Cleaning and

maintenance of all-round food mixer).

3

Clean the outer surface of the appliance only with a soft,

damp cloth.

4

Place the appliance on a dry, at and stable surface such

as a kitchen worktop or table. Place the appliance away from

the edge of the worktop.

Operating the food mixer

MOTOR UNIT ROTATING HEAD

The appliance is equipped with a motor unit rotating head

for easy changing of attachments and stainless steel bowl

removal. Use the release/lock button located on the base of

the appliance to release or lock the motor unit rotating head.

1

Press the button to unlock the motor unit rotating head.

You can then lift it to install an attachment or bowl.

For safety, the motor unit rotating head is locked when lifted.

Press the release button again to lower the motor unit

rotating head.

Be careful when lowering the motor unit

rotating head.

Do not operate the appliance with an attached

whisk or any other attachment with no bowl in

place. Failure to do so may result in injuries.

A

C

TIP

Product information and

directions for use

●

This appliance is intended for domestic use only.

Warranty conditions change when appliance is used

for catering.

●

Before rst use, remove all packing materials and

thoroughly clean the accessories.

●

After use, remove the power cord from the wall socket.

Specications

Technical specications are listed on the product name plate.

The planetary food mixer is a Class I appliance, equipped

with a power cord with a grounding wire and a grounding

plug.

Bowl capacity: 4 l.

The appliance meets the requirements of standards in force.

44

ZFP1100-001_v02

Tips for speed settings

Control knob

speed setting

Function Application

1-3 Kneading Kneading heavy, dense dough, such as yeast dough, pasta dough,

dumpling dough, etc., and to pre-mix the ingredients.

4-8 Mixing For mixing cake cream, batter, mashed potatoes, etc.

9-12 Whipping Whipping egg whites, whipped cream, creams, etc.

It features 12 speed settings and an off position "0".

1

In order to operate the appliance, turn the knob clockwise

from "0" (off) to the required speed setting.

To avoid splashing the ingredients out of the

bowl, always start at the lowest speed. When

the ingredients start to mix, you can increase

the speed in accordance with the information

contained in section Tips for speed settings.

When nished, turn the speed control knob

to "0" (off) and remove the plug from the wall

socket.

Using the attachments

WHISK

It is used for whipping egg whites, whipping cream, kneading

light sponge cakes, etc.

FLAT BEATER

It is used for preparing cake cream, batter, mashed

potatoes, etc.

MIXING HOOK

Is used for kneading heavy dough such as yeast dough,

pasta dough, dumpling dough, ginger bread dough, etc.

Mixing time

Your food mixer will mix faster and more thoroughly

than most traditional mixers. Therefore, mixing time

recommended in traditional recipes should be adjusted in

order to avoid excessive mixing. For example, some dough

may require only half the time to get mixed, compared to

traditional food mixers.

Do not operate the appliance continuously for

more than 10 minutes. Allow the appliance to

cool down for at least 20 minutes.

INSTALL THE BOWL

1

Turn the speed control knob to "0" (off). Remove the

plug from the wall outlet.

2

Lift the motor unit rotating head.

3

Install the bowl on the base.

4

Rotate the bowl clockwise until it locks.

REMOVE THE BOWL

1

Turn the speed control knob to "0" (off). Remove the

plug from the wall outlet.

2

Lift the motor unit rotating head.

3

Rotate the bowl counter-clockwise until it unlocks.

4

Lift the bowl and remove it from the base.

INSERT THE ATTACHMENTS (WIRE WHISK,

FLAT BEATER, MIXING HOOK)

1

Turn the speed control knob to "0" (off). Remove the

plug from the wall outlet.

2

Lift the motor unit rotating head.

3

Align the notch at the top of the attachment with the pin

on the rotating head drive shaft.

4

Push the attachment into the shaft and rotate counter-

clockwise until the shaft pin is fully inserted.

REMOVE THE ATTACHMENTS (WIRE WHISK,

FLAT BEATER, MIXING HOOK)

1

Turn the speed control knob to "0" (off). Remove the

plug from the wall outlet.

2

Lift the motor unit rotating head.

3

Rotate the attachment clockwise, until when the pin on

the drive shaft will be aligned with the notch in the whisk/

attachment.

4

Remove the attachment.

SPEED CONTROL KNOB

Planetary food mixer is equipped with a speed control knob.

D

E

F

G

B

45

ZFP1100-001_v02

Do not mix the ingredients by hand while

the appliance is in operation. Bowl and

attachments are designed so as to ensure

thorough mixing with no need for additional

mixing. Stirring the ingredients in the bowl

once or twice after turning off the mixer should

be sufcient.

Planetary food mixer cannot achieve high

rotating speed under heavy loads. This is

normal.

When preparing yeast dough, do not exceed

speed setting of 3, as it may damage the

appliance.

Tips and mixing techniques

●

In order to determine the appropriate mixing time in

a recipe, watch the dough and mix only until it reaches

the desired appearance specied in the recipe, for

example. smooth and creamy.

●

Always add ingredients as close to the sides of the bowl

as possible, and not directly onto the moving attachment.

●

When adding nuts, raisins or candied fruits, follow

individual recipes in terms of quantity. The basic principle

is that the solid ingredients should be added at the end

of mixing at the speed of 1. The batter should be thick

enough so that fruits or nuts did not drop to the bottom

of the baking tray during baking. Sticky fruits should be

coated with our for better distribution in the batter.

●

Mixtures containing large quantities of liquid ingredients

must be mixed at lower speeds to avoid splashing. Increase

the mixing speed only when the mixture has thickened.

Cleaning and maintenance the planetary food

mixer

Prior to manipulating the attachments or other

accessories, turn off the appliance and unplug

from the power source. Failure to do so may

result in injuries.

Always disconnect the appliance from the

power source before cleaning.

Do not use corrosive cleaning agents or

scouring cleaning cloths.

NEVER immerse the base or motor unit rotating

head in water or any other liquid.

●

In order to prevent the food residues from drying

out, thoroughly wash all the elements in contact with

processed product after each use.

When washing up by hand, use warm water with

a dishwashing liquid, then rinse and dry thoroughly.

●

All attachments and the bowl may be washed by hand or

in a dishwasher.

●

Wipe the motor unit, speed control knob and feet with

a damp cloth and dry thoroughly. Stubborn dirt may be

removed with a cloth dampened with a mild cleaning

agent.

Ecology – Protect the environment

Each user can contribute to environmental

protection. It is neither difcult nor expensive.

To do this: Recycle cardboard packaging.

Discard polyethylene (PE) bags into

a dedicated plastics waste bin.

When the appliance will be no longer used take it to

a specialised waste collection centre collecting used

electrical and electronic goods as the appliance can contain

components and materials hazardous to the environment.

Do not dispose of the used appliance together with other

household waste!

The manufacturer does not accept any liability for any damages

resulting from unintended use or improper handling.

The manufacturer reserves his rights to modify the product any time

in order to adjust it to law regulations, norms, directives, or due to

construction, trade, aesthetic or other reasons, without notifying in

advance.

Page is loading ...

Zelmer ZFP1100C User manual

This manual is also suitable for

Zelmer ZFP1100C User manual

in other languages

Related papers

Other documents