Sony UDA-1 Reference guide

Page is loading ...

2

GB

Do not install the appliance in a confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover the top board of the appliance with

newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked flame sources (for example, lighted

candles).

To reduce the risk of fire or electric shock, do not expose this appliance to

dripping or splashing, and do not place objects filled with liquids, such as

vases, on the appliance.

The unit is not disconnected from the mains as long as it is connected to

the AC outlet, even if the unit itself has been turned off.

As the main plug is used to disconnect the unit from the mains, connect

the unit to an easily accessible AC outlet. Should you notice an abnormality

in the unit, disconnect the main plug from the AC outlet immediately.

Do not expose batteries or appliances with battery-installed to excessive

heat, such as sunshine and fire.

Excessive sound pressure from earphones and headphones can cause

hearing loss.

Indoor use only.

Recommended cables

Properly shielded and grounded cables and connectors must be used for

connection to host computers and/or peripherals.

Notice for customers: the following information is only

applicable to equipment sold in countries applying EU

directives.

This product has been manufactured by or on behalf of Sony Corporation,

1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. Inquiries related to product

compliance based on European Union legislation shall be addressed to the

authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse

61, 70327 Stuttgart, Germany. For any service or guarantee matters, please

refer to the addresses provided in the separate service or guarantee

documents.

This equipment has been tested and found to comply with the limits set

out in the EMC Directive using a connection cable shorter than 3 meters.

WARNING

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

3

GB

Disposal of Old Electrical & Electronic

Equipment (Applicable in the European

Union and other European countries with

separate collection systems)

This symbol on the product or on its packaging indicates

that this product shall not be treated as household

waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling of this

product. The recycling of materials will help to conserve natural resources.

For more detailed information about recycling of this product, please

contact your local Civic Office, your household waste disposal service or the

shop where you purchased the product.

Disposal of waste batteries (applicable in the

European Union and other European countries

with separate collection systems)

This symbol on the battery or on the packaging indicates that

the battery provided with this product shall not be treated as

household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical symbols for

mercury (Hg) or lead (Pb) are added if the battery contains more than

0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly, you will help prevent

potentially negative consequences for the environment and human health

which could otherwise be caused by inappropriate waste handling of the

battery. The recycling of the materials will help to conserve natural

resources.

In case of products that for safety, performance or data integrity reasons

require a permanent connection with an incorporated battery, this battery

should be replaced by qualified service staff only.

To ensure that the battery will be treated properly, hand over the product

at end-of-life to the applicable collection point for the recycling of electrical

and electronic equipment.

For all other batteries, please view the section on how to remove the

battery from the product safely. Hand the battery over to the applicable

collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery,

please contact your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of

Apple Inc., registered in the U.S. and other countries.

All other trademarks and registered trademarks are of their respective

holders. In this manual, ™ and ® marks are not specified.

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory

has been designed to connect specifically to iPod or iPhone, respectively,

and has been certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards. Please note that the use

of this accessory with iPod or iPhone may affect wireless performance.

Made for iPod/iPhone models

The compatible iPod/iPhone models are as follows. Update your iPod/

iPhone with the latest software before using with the unit.

USB works with:

 iPhone

iPhone 5/iPhone 4S/iPhone 4/iPhone 3GS/iPhone 3G

 iPod touch

iPod touch (5th generation)/iPod touch (4th generation)/

iPod touch (3rd generation)/iPod touch (2nd generation)

Copyrights

continued

4

GB

 iPod

iPod classic

 iPod nano

iPod nano (7th generation)/iPod nano (6th generation)/iPod nano (5th

generation)/iPod nano (4th generation)/iPod nano (3rd generation)

Other trademarks and trade names are those of their respective owners.

5

GB

Precautions

On safety

Should any solid object or liquid fall into the cabinet, unplug the unit and

have it checked by qualified personnel before operating it any further.

On power sources

 Before operating the unit, check that the operating voltage is identical

with your local power supply.

The operating voltage is indicated on the nameplate on the back of

the unit.

 The unit is not disconnected from the AC power source (mains) as long as

it is connected to the wall outlet, even if the unit itself has been turned off.

 If you are not going to use the unit for a long time, be sure to disconnect

the unit from the wall outlet. To disconnect the AC power cord (mains

lead), grasp the plug itself; never pull the cord.

 The AC power cord (mains lead) must be changed only at a qualified

service shop.

On placement

 Place the unit in a location with adequate ventilation to prevent heat

buildup and prolong the life of the unit.

 Do not place the unit near heat sources, or in a place subject to direct

sunlight, excessive dust, or mechanical shock.

 Do not place anything on top of the cabinet that might cause

malfunctions.

 Use caution when placing the unit on surfaces that have been specially

treated (with wax, oil, polish, etc.) as staining or discoloration of the

surface may result.

On operation

Before connecting other equipment, be sure to turn off and unplug

the unit.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened

with a mild detergent solution. Do not use any type of abrasive pad,

scouring powder, or solvent, such as alcohol or benzine.

If you have any questions or problems concerning your unit, please consult

your nearest Sony dealer.

6

GB

Specifications

Amplifier section

Reference Power Output

23 W + 23 W (4 ohms, 1 kHz, THD 10%)

Rated Power Output

20 W + 20 W (4 ohms, 1 kHz, THD 0.9%)

Speaker impedance match

4 ohms - 16 ohms

S/N ratio

LINE IN: 100 dB (short-circuit input, 20 kHz LPF, A Network)

USB IN: 100 dB (20 kHz LPF, A Network)

Frequency response

10 Hz - 100 kHz (+0 dB, –3 dB) (4 ohms, LINE IN)

Input section (digital)

USB REAR (USB-B jack)

USB 2.0 compatible

Supported format

PCM (Sampling frequency: 44.1 k/48 k/88.2 k/96 k/176.4 k/

192 kHz, data bit length: 16/24/32 bits)

DSD (2.8 M/5.6 MHz)

USB FRONT (USB-A jack)

USB 2.0 compatible

Supported format

PCM (Sampling frequency: 32 k/44.1 k/48 kHz,

data bit length: 16 bits)

COAXIAL jack

Input impedance: 75 ohms

Supported format

PCM (Sampling frequency: 32 k/44.1 k/48 k/88.2 k/96 k/176.4 k/

192 kHz, data bit length: 16/24 bits)

OPTICAL jack

Supported format

PCM (Sampling frequency: 32 k/44.1 k/48 k/88.2 k/96 kHz, data

bit length: 16/24 bits)

Input section (analog)

Input sensitivity: 500 mV

Input impedance: 100 kilohms

Output section

LINE OUT

Output voltage: 2 V

Output impedance: 2.2 kilohms

2 Hz - 80 kHz (–3 dB)

PHONES

17 mW + 17 mW (8 ohms, THD 1%)

55 mW + 55 mW (32 ohms, THD 1%)

170 mW + 170 mW (300 ohms, THD 1%)

General and others

Power requirements

AC 220-240 V 50/60 Hz

Power consumption

On: 65 W

During standby mode: 0.3 W

Dimensions (approx.) (w/h/d)

225 mm × 74 mm × 262 mm

including projecting parts and controls

Mass (approx.)

4.0 kg

Supplied accessories

AC power cord (1)

Remote control (RM-ANU182) (1)

USB cable (1)

Quick Start Guide (1)

Reference Guide (this manual) (1)

Design and specifications are subject to change without notice.

 Standby power consumption: 0.3 W

Page is loading ...

Sony UDA-1 Reference guide

Sony UDA-1 Reference guide

in other languages

Related papers

Other documents