First
Please connect all signals
and antennas to jacks and
the terminals on the back.
Then press the Channel UP key.
BEGIN CHANNEL SEARCH
Note: Before beginning channel search, point
your antennas toward the transmitting
tower(s). For tower information you
can log onto www.antennaweb.org,
type in your zip code and get a listing
of the tower coordinates in your area.
The channel search process may take
several minutes. Please be patient.
1. Press POWER.
2. Press CHANNEL UP to start Channel
Search.
AS
Quik ‘N Easy Setup
Several factors affect picture shape.
Such as, the aspect ratio of the
broadcast image, the aspect ratio of
the original program material, and
the aspect ratio of the display screen.
Identifying Picture Shapes
Letter Box—This term is used to
describe a 16:9 ratio image dis-
played on a 4:3 aspect ratio screen.
Pillar Box—This shape results
when 4:3 aspect ratio material is dis-
played on a 16:9 aspect ratio screen.
Postage Stamp—This condition
occurs when an original 4:3 aspect
ratio program is broadcast as a
16:9 aspect ratio program, then
displayed on a 4:3 aspect ratio
screen. This causes the image to
display in the center of the screen
with a black border.
The PIX SHAPE key can be used
to Zoom the center of the image to
fill the screen. (The sides of a nor-
mal 16:9 image will be cut off.)
Use the PIX SHAPE key to adjust
the image size or shape to suit your
personal preferences. Not all shapes
will be available for all broadcasts.
Options will vary by model, due to
aspect ratio differences.
Normal is the term used to describe
programming that is broadcast in
its original aspect ratio (4:3 or
16:9) and displayed on a screen
with the same aspect ratio as the
original program material.
DIGITAL ANTENNA IN
Your TV can receive and display ANY resolution
being broadcast. The signal makes the difference.
Note: 480i / 480p / 720p / 1080i Resolutions—
Depends on broadcasting stations and
content providers. Press the INFO key to
determine the resolution being received.
UHF/VHF/CATV IN
Connect an Antenna, Analog Cable, or
Satellite Receiver to this terminal.
Note: The only resolution available from any
of these connections is 480i.
DIGITAL ADD-ON SEARCH
Use this feature to add new digital channels or
to add digital channels who’s broadcast towers
are in opposite directions from your location.
If necessary, after the initial search, turn the
antenna and use the On-Screen Menu to per-
form a Digital Add-on Search. Repeat these
steps for each direction in which there are trans-
mitting towers.
A Digital Add-on Search may take several min-
utes to complete.
1. Select a digital channel (digital channels
have a “D” prefix, such as, D03).
2. Press MENU.
3. Use the CURSOR keys to highlight the
Antenna icon.
4. Press ENTER.
5. Use the Up/Down CURSOR keys to high-
light Digital Add-on Search.
6. Press ENTER.
7. Use the Down CURSOR key to choose Yes.
8. Press ENTER to begin searching for new
digital channels.
Call Us, We Can Help!
1-800-877-5032
www.sanyotv.com
Part Number: 1JC6P1P0184--
SEARCH FOR
CHANNELS
2
nd
1
st
CONNECT SIGNALS TO THE TELEVISION