Page is loading ...
1. Introduction to the AVG-TSC6
The AVG-TSC6 Desktop Interface is a high-quality anodized brushed aluminium
table mount interface box. The attractive enclosure can be into a table top or other
flat surface maintaining a low profile.
It comes with a set of standard cables but can easily be customized to suit any
application. To access the connectors, users swivel the top of the enclosure. The
cover releases and slides away so you have easy access to the cables, presenting
the connectors at an ergonomic 45-degree angle to the tabletop. When closing, all
the cables and connectors will be covered, ensuring a neat and clean appearance.
1.2. Features
Rugged Brushed Aluminium Chassis
Small Footprint
Modular allowing custom cables to be
installed
Low Profile ergonomic cover when
closed
Sliding Cover Mechanism
High Quality Industry Standard
Connectors and cable
2. Package List
1 x AVG-TSC6
2 x Butterfly Clamps
2 x U Cable Clamps
Cut out template
Note: Please confirm if the product and the accessories are all included.
3. System Connection
3.1 System Applications
The AVG-TSC6 is ideal in applications where cabling needs to be both easily and
neatly stored away as well as provide standard industry connectivety for Boardroom,
Presentation and Teaching applications.
3.2. Usage Precautions
1. System should be installed in a clean environment with temperature and humidity
maintained to within equipment specification.
2. All of the power switches, plugs, sockets and power cords should be insulated
and safe.
3. All devices should be connected before power is turned on.
AVG-TSC6
4. Installation
1. Cut a hole in the table surface using provided template.
2. Insert the Unit into cutout and adjust position ready for fastening.
3. Align the supplied support fasteners into the notches of the units frame, then
tighten firmly Butterfly Fasteners.
4. Secure cables with clamps and screws allowing adequate cable length once
pulled out.
5. Connect cables to allocated modules
Input
Input Connector
2 RJ45 Socket, 2 RJ45 Connector Lead, 1
HDMI Lead, 1 VGA + 3.5mm Lead, 1 USB
Socket Lead, AU Power Socket
Output – approx. 1m flying lead
Output Connector
1 Audio – 3.5mm Connector Lead, 1 VGA D
Sub Female 15 pin, 4 RJ45 Connector Lead,
1 HDMI socket, USB Plug Lead, 240V
unterminated Lead
General
Power Rating 240V Mains Rated Cable
Overall
Dimensions
200x129.5x125
(W*H*D)
Cutout 191x121mm(W*H)
Note: 240V Electrical Cable Connector must be installed by a Licensed
Electrician
/