Simrad Halo radar, Halo radar software Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Simrad Halo radar Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Page2of7
Halo radar software upgrade instructions for version 5.3.14
NOTE: Before installing this software make sure the RI12 interface box
has software version 0.1.04.00.Thissoftwareandinstructionscanbedownloaded
fromwww.simradyachting.com
1. Press HOME orPAGES.
2. SelectFILESfromthelefthandmenu.

3. Select the file RadarAppBRHALO5.3.14.riw.
4. SelectUpgrade.


Page3of7
5. SelecttheRadaronthelistofcompatibledevices,thenselectStart Upgrade.

6. Aprogressbarwillappear.Sendingtheupgradetotheradar.

7. Upgradeinstallationintheradar.

8. TheRadarwillrebootwithdisplay“UpgradeComplete”.


Page4of7
9. Two“RadarTimedOut”messagesmayappear.Thisisnormal.SelectOKtoUpgrade
Completemessage.

10. SelectXtoexittheupgradefunction.
After the upgrade
Afterapplyingthesoftwareupgrade,werecommendcheckingtheradarinstallationsettingsand
restoringtheradartofactorydefaults.ThesesettingsarefoundontheradarInstallationpageof
theMFD.TheRadarwillneedtobeintransmitmodetoaccessthesettings.
OntheradarpageselectMENU >
TRANSMIT.
SelectHOME or PAGES >SETTINGS >RADAR >INSTALLATION.

Page5of7
Check Software version:UnderRadar Status>Scanner Info >Software version.Thesoftware
versionaftertheupgradeshouldbe5.3.14

Check antenna height:Antennaheightsettingshouldberecheckedandconfirmedasthisis
criticalforSTC/SeaClutteroptimisation.


Page6of7
Check Antenna Length:Antennasizeshouldalsoberecheckedtospecifyifa3,4or6ft
antennaisinstalled.
Reset radar to factory defaults:Resettingtheradartofactorydefaultsisstrongly
recommendedaftertheupgrade.Thiswillnotaffecttheinstallationsettingssuchas
antennaheightandwidth.ItwillresetsettingssuchasGainandSeaClutter.

Power Cycle:Atthisstagewerecommendpowercyclingthesystembeforeusingtheradar.
/