Home Accents Holiday 8204-10626 Operating instructions

Brand: Home Accents Holiday

Model: 8204-10626

Type: Operating instructions

Home Accents Holiday 8204-10626 is a 7.5-foot animated plush LED pre-lit tree that will bring festive cheer to your home during the holiday season. With its vibrant lights, dancing plush characters, and cheerful holiday music, this tree is sure to be a hit with family and friends. The tree is easy to assemble and disassemble, and comes with everything you need to set up a magical Christmas display, including a remote control for convenient operation. Create a truly enchanting holiday atmosphere with the Home Accents Holiday 8204-10626 animated plush tree.

SET-UP/ OPERATING INSTRUCTIONS FOR THE

7.5-FOOT ANIMATED PLUSH LED PRE-LIT TREE

ITEM# 8204-10626

INSTRUCTION MANUAL

QuantityDescriptionPart

G-1

G-2

D E

H-2

H-1

I-1 I-2 J-1 J-2

L M N O

VOL

DEMO

LIGHTS

Questions, problems, missing parts? Before returning to your retailer, call our customer service

department at 1-877-527-0313, between the hours of 8 a.m. and 5 p.m., EST, Monday-Friday or

email at [email protected].

Plug

Socket

Plug

Socket

Tree stand

ASSEMBLING THE TREE STAND

Step 1. Choose a location near a wall outlet.

Step 2. Open the stand to a 90 degree angle until the hole lines up with the hole on the tube.

Step 3. Screw an eye bolt into the hole.

Tree Top

Tree upper middle section

Tree lower middle section

Tree bottom

Tree stand with eye bolt

Angel tree topper

Plush dog - Blue

Plush dog - Red

Plush bear - Brown

Plush bear - White

Plush nutcracker

Plush snowman

Plush snowman w/box

Plush penguin w/box

Plush gift box

Beaded garland

Remote Control

Gift Box Speaker

AC/DC Adapter For Plush

AC/DC Adapter For Tree

G-1

G-2

H-1

H-2

I-1

I-2

J-1

J-2

1 2

3 4

FIG. 1

FIG. 8

FIG. 2

FIG. 3

FIG. 5

FIG. 4

FIG. 4-A

FIG. 6

FIG. 7

Step 5. Insert the tree top (A) into the tree upper middle section (B). (See Fig. 5)

Step 6. Connect the end connector E and F of Gift Box Speaker with the connector found on the bottom section (D) in

correct direction (always match the plug on the end connector of power cord with the socket on the

connector fixed on the bottom section (D) according to the magnified drawing on Fig. 6, 7).

Step 7. Allow branches to fall into place or gently pull branches up and out. When adjusting branches be sure that all

wires are free of branch hinges. (See Fig. 8)

Step 8. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and one at

the center of the main stem. Repeat pattern for each branch. (See Fig. 9)

Step 9. Insert the end connectors of power supply cords into the corresponding holes of the connector fixed on the

Gift Box Speaker. Plug the well-connected power supply cords from the Gift Box Speaker into electrical outlets.

ASSEMBLING THE TREE

Please remove protective covers from the base of the pole for each tree section before assembling.

Step 1. Insert tree bottom (D) into the tree stand and tighten the screw. (See Fig. 1)

Step 2. Insert tree lower middle section (C) into the tree bottom (D).

(See Fig. 2)

Step 3. Insert tree upper middle section (B) into the tree lower middle section (C). (See Fig. 3)

Step 4. Attach the Angel tree topper (F) into the Tree top section (A). Once Angel is in position, connect the

two ends of wire connectors together making sure that each end aligns correctly. (See Fig. 4 and Fig.

4-A)

ASSEMBLING THE PLUSH CHARACTER INTO THE TREE

Please remove 24 pcs plush character from the inner carton box.

Step 1. Attach the 4 pcs plush dog (G-1, G-2) into the tree top section.

Step 2. Attach the 6 pcs plush bear (H1, H2) into the tree upper middle section.

Step 3. Attach the 3 pcs plush nutcracker (I-1) and 3 pcs plush snowmen (I-2) into the tree lower middle section.

Step 4. Attached the 4 pcs plush snowmen w/gift (J-1) and 4 pcs penguins w/gift (J-2) into the tree bottom section.

ASSEMBLING THE PLUSH GIFT BOXES AND BEADED GARLAND

Please remove the 22 pcs Plush Gift Boxes and beaded garland from

the inner carton box.

Step 1. Hang Plush Gift Boxes onto the tree. as shown in the diagram.

Step 2. Attach the beaded garland around the tree as shown in the

diagram.

Battery Usage

1. Keep these instructions for future reference because they contain important

information.

2. Do not mix alkaline,standard (carbon-zinc) batteries.

3. Do not mix old and new batteries.

4. Non-rechargeable batteries are not to be recharged.

5. Do not use rechargeable batteries.Only batteries of the same or equivalent type

as recommended are to be used.

6. Batteries are to be inserted with the correct polarity.Remove batteries if

consumed or if product is to be left unused for a long time.

7. The supply terminals are not to be short-circuited.

8. Dispose of batteries safely. DO NOT DISPOSE OF BATTERIES IN FIRE.

BATTERIES MAY EXPLODE OR LEAK.

Operation:

a) Wireless Remote: Place the ON/OFF switch into the “ON” position is located on

the back of the Remote Control and point wireless remote towards the infrared

receiver located on front and two side of the Gift Box Speaker. Press the "ON"

button on the Wireless Remote to illuminate the tree, activate the dancing plush

characters and play holiday music.

Note: The infrared sensor has a range up to 6 meters/20 feet

b) Manual Activation: Place the power switch ON/OFF into the “ON” position is

located on the back of the Gift Box Speaker and Press function button is

located on the back of the Gift Box Speaker to activate, as shown in the

diagram.

HOW TO DISASSEMBLE TREE:

Step 1. Unplug the power cords from the wall outlets. Remove power supply

cords from the Gift Box Speaker and and save it.

Step 2. Remove all ornaments and decorations.

Step 3. Gently lift the tree top straight up to remove from the center section and

fold all branches towards the pole.

Step 4. Repeat this step for the other tree sections.

Step 5. Store your tree in a cool, dry place away from sunlight.

TROUBLESHOOTING:

Side

view

FIG. 9

G-1

H-1

I-1

J-1 J-1 J-1 J-1 J-2 J-2 J-2 J-2

I-1 I-1 I-2 I-2 I-2

H-1 H-1 H-2 H-2 H-2

G-1 G-2 G-2

Plug the adapter into a standard

100V-240V household outlet.

SPEAKER

INFRARED

RECEIVER

Problem Solution

The tree does

not light

Ensure that all tree sections are connected well into each other and that the connectors (E, F) are connected well

into the connectors fixed on the tree bottom (D).

Ensure the power supply cords are connected well into the connectors fixed on the Gift Box Speaker and the well

connected power supply cords are plugged into the wall outlets.

If plush doesn’t work after plug in, the mechanism may be stuck by plush, please adjust its hands and head to the

right position.

Please make sure the plush character are property connected with the destinated plug connector.

Warning: Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

OPERATION INSTRUCTIONS:

Carefully slide to remove the Remote Control, as

shown in diagram. For in store demonstration

you can attach the remote control to the branch

with the Plastic Cable Tie (included), The remote

control can be secured in place. (See Fig. 10)

Battery Replacement

Battery Powered – Requires two (2) “AAA”

batteries for the Wireless Remote Control. Please

note that the batteries are included with purchase.

1. Remove the battery compartment case cover which is

located on the back of the remote control.

2. Clean the battery contacts and also those of the device

prior to battery installation.

3. Insert 2 “AAA” batteries with correct polarity and replace

cover and safety screw.

Replace batteries if the Remote signal become weak.

Plush Gift Box

(Part K)

Beaded Garland

(Part L)

LIGHTS

VOL -

VOL +

Power Switch OFF/ON

DEMO

Please note this tree comes with a remote

control to control the function of the tree

lights and the Gift Box Speaker. Please see

the instruction of remote control below.

WARNING:

This product can expose you to BPA, which is known to the State of California to cause birth defects or other reproductive

harm. For more information go to: www.P65Warnings.ca.gov/BPA

PART A

PART B

PART C

PART D

06052018_2003186

Made in China

VOL

DEMO

LIGHTS

Working

Indicator

Light

WORKING

INDICATOR

LIGHT

ON/OFF

Switch

FIG 10

The plush does

not work

The remote control

does not work

For more detailed instructions on assembly,

Please scan QR code with Home Depot app

from your mobile device, Or view an online tutorial at:

http://www.pan-asian.com:8081/portfolio/plush-tree/

Please make sure the remote control had sufficient batteries power for function.

Ensure the remote is function with in the distance from the tree.

If you are still experiencing problems with the tree please call 1-877-527-0313 for instructions.

Front

Back

Home Accents Holiday 8204-10626 Operating instructions

Home Accents Holiday 8204-10626 Operating instructions

Home Accents Holiday 8204-10626 Operating instructions

Related papers

Other documents