Sterling 5210--40C Operating instructions

Pot Tree Assembly Instruction

1. Remove packing material from the tree pot and tree.

2. Make sure the pot base and the pot are firmly attached.

3. Locate the tree pot on an even surface.

4. Carefully insert tree section (Fig. A) into the pot. Make sure the pole

is firmly inserted into the pot.

5. Gently pull all branches down and into place.

6. Shape the branches. Starting with tips closest to the pole - position

one tip to the right, one to the left and one at the center of the main

stem as illustrated (Fig. B).

7. Repeat pattern for each branch.

8. Plug the cord into a standard electrical outlet or other power source.