POLYWOOD ADD202WH Operating instructions

A - .273 X 2.50 SOCKET WAFER A

TOOLS NEEDED

4mm HEX KEY, ALLEN, T-HANDLE

(INCLUDED)

B - .273 X 3 SOCKET WAFER A

__(1) Hardware pack

Qty. Description

Model: ADD202

__(1) Chair frame

__(1) Back assembly

top of the back leg using

HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED

(2) 2-1/2" Screws

position as shown

sliding bottom in first then rotate into

Place back assembly in chair frame by

using (2) 3" Screws

Attach arms to back assembly

Step 3

Step 1 Step 2

Attach back assembly to seat using

(2) 2-1/2" Screws

Atach back assembly to the

4MM HEX KEY, ALLEN, SHORT ARM

(INCLUDED)

9/19/2014

ASSEMBLY INSTRUCTIONS

To view our full warranty, please visit the warranty page on our website at

polywoodinc.com/resources.

If you have questions or concerns regarding assembly instructions or missing parts,

please contact us at (877) 457-3284 or email suppor[email protected]

youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD

Blog

Download PDF