MEASURING GUIDE
Determining Your Opening Size
• 6’ Level
• 4’ Level
• 2’ Level
• Tape Measure
• Pencil
• Masking Tape
• Protractor
Ordering the correct size enclosure is critical to a proper installation. Please follow
these steps to accurately measure your shower enclosure opening.
STEP 1
Ensure that the nished wall
material is in place before
measuring.
STEP 2
For inline openings, take
length-wise measurements at
the bottom, center and top of
your opening.
For openings with a return,
please measure at the center
of the curb (centerline).
Pro Tip: Remember to allow for the
body of the measuring tape.
STEP 3
Check all surfaces and walls for level.
If any surface is out of level by 3/8” or
more, a tapered ller is recommended.
Pro Tip: Don’t forget
to check the top
of the buttress,
if applicable.
STEP 4
Measure your available height (from
shower curb to ceiling) and requested
height (from shower curb to the
desired height of you door).
Recommended
Measuring Tools
Need Assistance? Contact Basco at 800.45.BASCO or support@bascoshowerdoor.com.
L882 Measuring_Binder.pdf
/
