Plantronics 203500-01 User manual

Category
Bluetooth music receivers
Type
User manual

This manual is also suitable for

Voyager 5200: How to Pair
Article ID : 000023427
This procedure explains how to pair your Voyager 5200 headset with your phone
or other Bluetooth device.
First Time Pairing
The first time you turn on your headset, the pairing process begins.
1. Turn the headset on and then put it on. You'll hear "pairing" and the headset LEDs will
flash red and blue.
2. Activate Bluetooth on your phone and set it to search for new devices.
iPhone Settings > Bluetooth > On*
Android Settings > Bluetooth: On > Scan for devices*
NOTE: * Menus may vary by device.
3. Select "PLT V5200 Series."
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you will hear "pairing successful" and the headset LEDs will
stop flashing.
NOTE: Your headset can pair up to 8 devices but only maintain 2 connections
simultaneously; this includes the Bluetooth USB adapter.
NFC pairing
NFC pairing is an option to pair your phone if there is one or no devices connected already. NFC
pairing will not work if there are two devices connected already.
1. Ensure NFC is on and your phone's display is unlocked. (Phones may vary.)
2. With the headset turned on, lay the headset on the back of the phone near the NFC tag on
the phone as shown until NFC pairing is completed. If necessary, accept the connection.
Pair to Another Device
1. Turn the headset on and then put it on.
2. Press and hold the Call button until you hear "pairing."
3. While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and
set it to search for new devices.
4. Select "PLT V5200 Series." Once successfully paired, indicator lights will stop and you
will hear "pairing successful."
  • Page 1 1

Plantronics 203500-01 User manual

Category
Bluetooth music receivers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI