Walker Edison Furniture Company HDT72MWWO Operating instructions

Brand
Walker Edison Furniture Company
Model
HDT72MWWO
Type
Operating instructions
Join parts (2, 4, 6) and parts (1, 3, 5) as shown in the diagram.
Secure parts together using bolts (C) as shown.
Join side assemblies to parts (7,8,9,10, 11) as shown in the diagram.
Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C).
Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C).
Attach seat (13) to frame assembly using bolts (B) as shown in the diagram.
Attach shelf (14) to frame assembly using bolts (B) as shown in the diagram.
Join cross beams (15) together using bolt (F) and nut (G) as shown.
Secure cross beam assembly to frame using screws (E).
Attach angle supports (12) to frame using bolts (C) as shown.
(Optional) Insert wall plugs (J) into your wall at the indicated measurements if desired.
(Optional) Secure unit to the wall using screws (K) and washers (L) at the installation points
of wall plugs (J) from previous step.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Walker Edison Furniture Company HDT72MWWO Operating instructions

Brand
Walker Edison Furniture Company
Model
HDT72MWWO
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents