2. ROOMS TO GO
  3. 26025836

ROOMS TO GO 26025836, 26025850 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Hall Tree HT72MW. This document outlines the steps required to assemble the unit, including adding the seat, shelf, and hooks, and offers an optional wall mounting method. I'm ready to answer any questions you might have about assembling this unit.
  • What is included in the box?
    What type of screws are used to secure the hook to the wooden panel?
    Is it possible to mount this unit to the wall?
Item # : HT72MW
Assembly Instructions
  

Revised 11 /2017
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reseed. P.1
Join parts (2, 4, 6) and parts (1, 3, 5) as shown in the diagram.
Secure parts together using bolts (C) as shown.
Join side assemblies to parts (7,8,9,10, 11) as shown in the diagram.
Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C).
Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C).
Attach seat (13) to frame assembly using bolts (B) as shown in the diagram.
Attach shelf (14) to frame assembly using bolts (B) as shown in the diagram.
Secure cross beam assembly to frame using screws (E).
Attach angle supports (12) to frame using bolts (C) as shown.
Use screw (N) to secure the hook to the wooden panel (8,9).
(Optional) Insert wall plugs (J) into your wall at the indicated measurements if desired.
(Optional) Secure unit to the wall using screws (K) and washers (L) at the installation points
of wall plugs (J) from previous step.
/