Mircom LT-6161-BB-1001WPRA-BB-1002WPRA Installation guide

Hello! I am an AI chatbot trained to assist you with the Mircom LT-6161-BB-1001WPRA-BB-1002WPRA Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

LT-6161 Rev 2 2020-02-04 Page 1 of 2

BB-1001WP(R)A and BB-1002WP(R)A Weather

Protected Enclosures

Rated for Outdoor Environment Wet Location according to UL 864 and ULC-S527

122 °F (+50 °C) to −40 °F (−40 °C)

BB-1001WP(R)A

Notes: BB-1001WPA is a white model. BB-1001WPRA is a red model.

Connect chassis ground stud to earth ground.

To prevent water from entering the box:

• Use a threaded conduit connector to provide entry for cables.

• Apply outdoor-rated weatherproof silicone to the 4 mounting holes and around the

threaded conduit connector.

Refer to RAM-1032TZDS in LT-617 RA-1000 Series Manual for wiring instructions, DIP switch

settings, and operation.

11 5/32”

13/16”

12 15/16”

Diameter 7/32”

11”

9 1/2”

3 1/2”

Use 1 of the 2 knockouts for wiring.

Diameter of knockouts: 7/8”

Threaded conduit

connector (eld installed)

Suggested location

Apply outdoor-rated

weatherproof silicone

to the 4 mounting

holes and around the

threaded conduit

connector.

Door

Backbox

Annunciator

(RAM-1032TZDS-CC shown)

GB-1001RAM guard bracket

for RAM-1032TZDS-CC

4 nuts

LT-6161 Rev 2 2020-02-04 Page 2 of 2

BB-1002WP(R)A

Notes: BB-1002WPA is a white model. BB-1002WPRA is a red model.

Connect chassis ground stud to earth ground.

To prevent water from entering the box:

• Use a threaded conduit connector to provide entry for cables.

• Apply outdoor-rated weatherproof silicone to the 4 mounting holes and around the

threaded conduit connector.

Refer to RAM-1032TZDS and RAX-1048TZDS in LT-617 RA-1000 Series Manual for wiring

instructions, DIP switch settings, and operation.

17 15/16”