FINXIN Floor Lamp for Living Room, Modern Standing Lamp User manual

Brand: FINXIN

Model: Floor Lamp for Living Room, Modern Standing Lamp

Type: User manual

Floor Lamp Installation

Post-purchase: The installation process should be strictly followed by the installation instruction.

In use: If you found the light flash frequently or don’t work, please use the standby light bulb to change the old one or contact the seller.

To our clients: Thank you for buying our product, please read this instruction book carefully before you start installing the floor lamp.

— Notice: Do not repeatedly turning the light on and off —

www.finxin.com.cn

1. Please read the instruction book carefully before you start installing and maintaining the floor lamp, and keep it properly after you read it in case you need this to instruct in the

future. Please ask a real professional to install the light to keep the good quality of the floor lamp and your safe.

2. The power of the bulb should not exceed 60W(≤60W). If the power that the bulb use excess the rated power in a long period, it may damage the fixture because the shade may

get heat.

3. Please check whether the cable and the plug is still in a good condition before you use the light, and make sure that the local voltage can match the rated voltage of the light.

4. Please do not install the floor lamp in any area with high temperature, such as a place near the stove, the gas or the exhaust funnel, and avoid getting moisture.

5. If the light isn’t on after power on, please check if the light bulb is in a good condition, and check if it is caused by a loose connection in the wires.

6. Please clean and check the light at regularly intervals. When you clean the light, the electric power should be cut off at first. Please use a soft and dry cloth to wipe the surface of

the light, any acid or alkaline solvent will damage the surface of the light.

7. If you want us to provide you after-sale service, please be familiar with the name of different parts of the light and the installation method, then give us the number of the model,

you can find it in the mark of the light itself.

Step6 Step9

Pull out the extra wires and make sure the wires

are in the slot

Tighten the lamp shade and bracket screws.

Step1

Cohesive Bandage

Metal ring

Cloth cover

The cloth cover rolls along the metal ring, then

held together with cohesive Bandage.

Notice