FINXIN Indoor Ceiling Fan Light Fixtures - FXCF07 (2018 New Design) Vintage New Bronze Remote LED 52 Ceiling Fans For Bedroom,Living Room,Dining Room Including Motor,5-Light,5-Blades,Switch User manual

Brand
FINXIN
Model
Indoor Ceiling Fan Light Fixtures - FXCF07 (2018 New Design) Vintage New Bronze Remote LED 52 Ceiling Fans For Bedroom,Living Room,Dining Room Including Motor,5-Light,5-Blades,Switch
Type
User manual

FINXIN Indoor Ceiling Fan Light Fixtures - FXCF07 (2018 New Design) Vintage New Bronze Remote LED 52 Ceiling Fans For Bedroom,Living Room,Dining Room Including Motor,5-Light,5-Blades,Switch is a state-of-the-art device that combines the functions of a ceiling fan and a light fixture. With its 52-inch blade span, it is ideal for use in large rooms such as bedrooms, living rooms, and dining rooms. The 5-light design provides ample illumination, while the 5-blade design ensures optimal airflow.

The fan features a powerful motor that delivers strong airflow, even at low speeds. The reversible motor allows you to change the direction of the airflow, providing cooling in the summer and warmth in the winter. The fan also comes with a remote control for added convenience, allowing you to adjust the fan speed and light settings from anywhere in the room.

FINXIN Indoor Ceiling Fan Light Fixtures - FXCF07 (2018 New Design) Vintage New Bronze Remote LED 52 Ceiling Fans For Bedroom,Living Room,Dining Room Including Motor,5-Light,5-Blades,Switch is a state-of-the-art device that combines the functions of a ceiling fan and a light fixture. With its 52-inch blade span, it is ideal for use in large rooms such as bedrooms, living rooms, and dining rooms. The 5-light design provides ample illumination, while the 5-blade design ensures optimal airflow.

The fan features a powerful motor that delivers strong airflow, even at low speeds. The reversible motor allows you to change the direction of the airflow, providing cooling in the summer and warmth in the winter. The fan also comes with a remote control for added convenience, allowing you to adjust the fan speed and light settings from anywhere in the room.

CEILING FAN INSTALLATION
www.finxin.com.cn
FXCF07
www.facebook.com/finxin
Call:+86 18122363278
Email: [email protected]
FXCF07
www.finxin.com.cn
Ceiling Fan Installation
This product is manufactured with the strictest quality and best selling abroad.
You can feel the comfortable natural air flow, keep air circulating by our product.
In summer, save 30% power by using ceiling fan and air conditioner at the same
time, you will feel cooler just like 25 when you adjust to 28 on the air
conditioner.
In winter, you can turn on the reverse function to make the room warmer when
the hot air is working by the air flow from down to up.
According to the pictures in the manual, you can install the ceiling fan more
easily. And the pictures may be is a little different from the product, but it
doesn’t affect your installation.
1. Ceiling fan must be installed by a qualified installer, don’t be installed by
yourself.In order to avoid electric shock please follow the step: turn off the
electric power, connect the ground wire→neutral wire? live wire, when it need
to be disassembled, remove live wire→neutral wire? ground wire.
2. Make sure all the accessories and parts are complete through the manual
before installation.
3. All screw must be tightened during installation process.
4. The blades don’t be touched by any other things to avoid danger.
5. Choose the right spot to install the ceiling fan. At least 2.3 meters distance
from the floor to the blades, to prevent accidental occurrence of fan blade
collsion.
6. Water and detergent is not allowed in cleaning, please dust the ceiling fan by
dry cloth or slight wet cloth.
7. Cut-off power before cleaning.
8. Don’t repair by yourself when it is broken, it must be repaired by the professional
service engineer.
To our clients: Thank you for buying our product, please read this instruction
book carefully before you start installing the Ceiling fan.
— Notice: Do not repeatedly turning the ceiling fan on and off—
Introduction
Attention
FINXIN PRODUCT INSPECTION
STANDARD INSTRUCTION
Date:
Order No:
Model:
Quantity:
First and END S/N of this Batch:
Inspector:
Qualified Seal:
We hereby certify that this batch of FINXIN product have been manufactured in conformance
with drawings, specifications, requirements and standard class. And we have done the
In-circuit Test, Function Test, for all the accessories 100% retest for Function Test and they
have all passed.
We hereby confirm that FINXIN have done 100% final inspection before the delivery and
don’t have problem.
FINXIN PRODUCT INSPECTION
STANDARD INSTRUCTION
Date:
Order No:
Model:
Quantity:
First and END S/N of this Batch:
Inspector:
Qualified Seal:
We hereby certify that this batch of FINXIN product have been manufactured in conformance
with drawings, specifications, requirements and standard class. And we have done the
In-circuit Test, Function Test, for all the accessories 100% retest for Function Test and they
have all passed.
We hereby confirm that FINXIN have done 100% final inspection before the delivery and
don’t have problem.
www.finxin.com.cn
www.finxin.com.cn
Package list
CEILING FAN INSTALLATION
www.finxin.com.cn
FXCF07
.
The ceiling fan of this company strictly abides by relevant regulations of household
appliances warranty, and we are devoting ourselves to providing satisfactory after-sale
services for distinguished customers.
The warranty term of fan motor is ten years, while the warranty term of other parts is
one year. When any quality related issue arises out of the fan, customers need to fill in
the [Warranty Card] and take a picture to be sent to the customer service email
[email protected]. Customer service staffs will timely follow up for handling.
Warranty service is only limited to quality issue(s) under normal use. Any and all
damages due to abnormal use, such as the installation and use without following the
manual, exceeding the normal voltage (110V±10), repair and modification without
permission from this company, and water entering the fan, are out of the warranty scope,
and the responsibility should be taken by the users.
The warranty term starts to count upon confirmation of goods reception by customers.
Warranty voucher is a guarantee for consumers to enjoy the right of warranty, so please
keep it properly. The warranty voucher should be filled in with seriousness; please do
not alter, or otherwise it is invalid.
www.finxin.com.cn
www.finxin.com.cn
Hanging bracket installation
Upper canopy and rod installation
1. Pull out the R-pin from the rod ( Picture 01 )
2. Trough the upper canopy and down canopy by the rod ( Picture 02) , and the wire
through into the hole of the rod,and insert the rod into the coupler ( loose the
screw of the coupler before inserting ), align the holes between the rod and the
coupler, through the holes by the cross pin and fix the cross pin by R-pin ( Picture
03 ). Finally, tighten the screws of the coupler and cover the coupler by down
canopy.
Picture 01 Picture 02 Picture 03
R-pin
R-pin
corss pin
Upper
canopy
Down
canopy
Coupler
screw
Cross pin
Concrete ceiling
Concrete ceiling
Drill a hole at the ceiling for the proper depth with (M8) drilling bit,
fix the expandable screw in it. Fix the hanging bracket by tightening
the nut to expandable bolt.
Expandable bolt
Choose the best way according to ceiling material.
After installing, it needs to be tested by hand whether it can support at least 30 kilograms.
Notice
screw
Octagon box ceiling
Use the handing bracket to fix in the octagon box.
www.finxin.com.cn
Trouble shooting
1.Motor can’t move
Check the wires (insulating layer of the wire maybe caught by the terminal ),check
whether all the inner wires and terminals are loose.
Input voltage maybe lower than the rate voltage, the rate data is 110V-50Hz, please
turn off the power before checking.
Make sure the plastic kit into the motor must be pick out ( the kit is to stop the motor
moving or rotating during the transportation)
2.Noise
All the screw must be tightened.
Check if the fan crash some obstacles when it’s moving.
Make sure the screw between hanging bracket and ceiling is tight, shockproof must
be installed on it.
3.Light doesn’t work
check the light switch.
check if the light’s wires and terminals are loose.
check if the bulb or LED source is work
check the remote control can work or not
4.Fan shaking
Hemisphere of the rod must be tight, the groove of the hemisphere
The top of the rod must be embed into the bulge of the hanging bracket.
Two screws in the coupler must be tight.
Check if all the screws of the blades and blade holders are tight.
Follow the step in the manual to adjust the fan.
Picture 04
Picture 05
www.finxin.com.cn
Fixing and Mounting heigh
Blade and holder installation
Upper
canopy
Notch
Hanging
bracket
Convex
groove
Screw
1. Match the convex groove of the hanging bracket and the Notch of
the rod,in order to prevent the fan shaking ( Picture 04)
2. Screw the hole between the hanging bracket and upper canopy,
and rotate the canopy to fix it, and then tighten the screw.
Rod
Hanging
bracket
Hanging
hook
Wheel
Hook styleBracket style
Distance to wall
0.50m
Distance from blade to floor
2.30m
(Length of the standard down rod is 20 cm which is used in at most 3
meters high room. Over this heigh, a longer rod is needed,please contact
the sale service to buy it.)
The down rod’s length
Blade holder
Blade
Screw + gasket
Align the hole between blade and holder, screw the holes tightly with screw and gasket ( Picture 05)
Don’t make the blade deformed when you install it, otherwise, it will wobble because of imbalance.
3. Balancing adjustment
If the problem still not be solved after the two steps, you need to take use of the balance
parts and follow the steps: firstly, set the fan to the fastest speed, to make the strongest
wobbling, then turn it off, choose one blade, the edge is attached by the clip . Start up
again the ceiling fan to fastest speed, observe if the state is better , if not,do the same
thing on another blade,repeat the step until it’s better. When you find out which blade
makes the fan better, move the clip right and left and start up the fan, to find out the
perfect point and mark it, remove the clip and sick the balancing kit to central axis of
blade’s back, position of balancing kit shall be consistent with the point.
www.finxin.com.cn
Balancing kit
Clip
Picture 06
Picture 07
www.finxin.com.cn
Blade holder and the light kit installation
1.Put out screw on the
motor, and align the
holder with the fan blade
to the hole of the motor,
screw and tighten the
blade on the motor.
( Picture 06)
2.Remove the cover,
connect the light wire to
the inner wire.(Make sure
the connection is firm)
3. Align the holes between
the box and the cover,
then screw them down
with screws
Glass shade and bulb installation( picture 07). Firstly, put out the lock ring and put into the glass shade,
replace the lock to tighten the glass shade, install the bulb on the light-socket.(Only work by E27 bulb or
LED bulb, each bulb should not exceed 25W)
Motor
Screw
Switch box
Light cover
Blade holder
E27 light-socket
Light lock ring
E27 glass shade
E27 bulb
Picture 08
Picture 09
Picture 10
www.finxin.com.cn
Remote control and wall control circuit diagram
Balancing
Remote control circuit diagram
Fan live wire L
(black)
Share neutral wire N
(white)
Light live wire L
(blue)
Fan live wire L
(black)
Share neutral wire N
(white)
Light live wire L
(blue)
Power live wire(black)L
Power neutral wire(white)N
Hanging bracket
Receiver
Without the artificial cause, if the fan encounters wobbling when it’s done,
do the following 3 steps:
1. Measure the height
Fixed a point, record the value from one
blade to ceiling (Picture 09), and
measure other blades, whether other
blades is the same distance.(if not,
check the screw of blade holder whether
loose and tighten it)
2. Exchange the blade
Try to exchange blade 1 and blade 3
( Picture 13),or blade 2 and blade 4,
or blade 3 and blade 5. Check if it is
better after exchanging.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

FINXIN Indoor Ceiling Fan Light Fixtures - FXCF07 (2018 New Design) Vintage New Bronze Remote LED 52 Ceiling Fans For Bedroom,Living Room,Dining Room Including Motor,5-Light,5-Blades,Switch User manual

Brand
FINXIN
Model
Indoor Ceiling Fan Light Fixtures - FXCF07 (2018 New Design) Vintage New Bronze Remote LED 52 Ceiling Fans For Bedroom,Living Room,Dining Room Including Motor,5-Light,5-Blades,Switch
Type
User manual

FINXIN Indoor Ceiling Fan Light Fixtures - FXCF07 (2018 New Design) Vintage New Bronze Remote LED 52 Ceiling Fans For Bedroom,Living Room,Dining Room Including Motor,5-Light,5-Blades,Switch is a state-of-the-art device that combines the functions of a ceiling fan and a light fixture. With its 52-inch blade span, it is ideal for use in large rooms such as bedrooms, living rooms, and dining rooms. The 5-light design provides ample illumination, while the 5-blade design ensures optimal airflow.

The fan features a powerful motor that delivers strong airflow, even at low speeds. The reversible motor allows you to change the direction of the airflow, providing cooling in the summer and warmth in the winter. The fan also comes with a remote control for added convenience, allowing you to adjust the fan speed and light settings from anywhere in the room.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents