Apple JBL Creature II User manual

Brand: Apple

Model: JBL Creature II

Type: User manual

This manual is also suitable for



StyleWriter

EtherTalk Adapter

User’s Guide

StyleWriter EtherTalk Adapter User’s Guide

Guide de l’utilisateur Adaptateur EtherTalk pour StyleWriter

Apple StyleWriter EtherTalk Adapter Benutzerhandbuch

Manuale Utente Adattatore Ethertalk StyleWriter

StyleWriter EtherTalk adapter Gebruikershandleiding

Guía del usuario del Adaptador EtherTalk para la StyleWriter

StyleWriter EtherTalk-adapter Handbok

StyleWriter EtherTalk

Communications regulation information

FCC statement

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of FCC

rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio-frequency energy, and if

not installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his or her

own expense.

DOC statement

DOC Class A Compliance This digital apparatus does not

exceed the Class A limits for radio noise emissions from

digital apparatus as set out in the interference-causing

equipment standard entitled “Digital Apparatus,” ICES-003 of

the Department of Communications.

Observation des normes—Classe A Cet appareil numérique

respecte les limites de bruits radioélectriques applicables aux

appareils numériques de Classe A prescrites dans la norme

sur le matériel brouilleur : “Appareils Numériques”, NMB-

003 édictée par le ministre des Communications.

CE statement

This equipment has been designed, tested, and found

compliant with the limits for Class A Information Technology

Equipment of EN55022. These limits are designed to provide

reasonable protection against radio interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio-frequency

energy and, if not installed and used in accordance with the

instruction manual, may result in interference to radio

communications. Operation of this equipment in a residential

area may cause radio interference, in which case the user will

be required to correct the interference at his or her own

expense.

VCCI statement

The StyleWriter EtherTalk Adapter supports all recent models

of StyleWriter printers. (See the label on the adapter box for a

list of supported printers.)

Making sure you have the correct software

Make sure that the appropriate printer driver software is

installed on your computer. (For information on how to install

printer software, see the manual that came with your printer.)

Earlier models of the StyleWriter printer require updated

versions of the printer driver software:

n The Color StyleWriter 2400 requires printer driver version

1.6.1 or later.

n The StyleWriter 1200, StyleWriter, and StyleWriter II

printers require StyleWriter 1500 printer driver version 2.2

or later.

You can obtain software updates from major online services

and your Apple-authorized dealer.

Connecting the cable to your printer

Note: Your adapter may appear different from the one

shown here.

Apple System/Peripheral-8

serial cable (included with

the printer)

StyleWriter EtherTalk Adapter

Connecting your printer to an Ethernet network

Apple Ethernet

twisted-pair

transceiver

Any standard IEEE 802.3-compatible

10BASE-T hub

Serial cable

EtherTalk

Adapter

RJ-45

patch cord

Power

adapter

Printer

CPU CPU

Installing on 10BASE-T

Two-meter Apple Ethernet

self-terminating cable

Apple Ethernet

thin coax transceiver

BNC T-connector

Serial cable

EtherTalk

Adapter

Power adapter

Printer

CPU CPU

Installing on 10BASE-2 (thinnet)

IMPORTANT If the printer is the last device on the network,

you must attach a 50-ohm terminating resistor to the

BNC T-connector.

Indicator lights

Using the printer on the network

When your printer is connected to the Ethernet network, its

name appears in the Chooser. You can access the Chooser

from the Apple (K) menu.

To select your printer:

3 Click the name of the

network printer that

you want to use.

1 Click the icon that

represents the

printer.

Test/Power (orange/green)

When the EtherTalk Adapter is ready for use, the light

changes from orange to green.

Printer activity (yellow)

When the printer receives print orders, this light flashes.

Collision (orange)

When more than one device on the Ethernet network tries

to transmit data at the same time, this light flashes. In normal

operation this light will blink occasionally.

Ethernet activity (yellow)

When there’s activity on the Ethernet network, this light

flashes.

Link (green)

For 10BASE-T connections only. A steady green light

indicates that the EtherTalk Adapter is properly connected.

2 If your network has

zones, click one to

select it.

Page is loading ...

StyleWriter EtherTalk

Page is loading ...

Apple, the Apple logo, AppleShare, AppleTalk, EtherTalk, ImageWriter, LaserWriter, and StyleWriter

are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

ZM030-8907-A

Printed in U.S.A.



Apple JBL Creature II User manual

Brand: Apple

Model: JBL Creature II

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

italiano: Apple JBL Creature II Manuale utente
français: Apple JBL Creature II Manuel utilisateur
español: Apple JBL Creature II Manual de usuario
Deutsch: Apple JBL Creature II Benutzerhandbuch
Nederlands: Apple JBL Creature II Handleiding
svenska: Apple JBL Creature II Användarmanual

Apple JBL Creature II User manual

This manual is also suitable for

Apple JBL Creature II User manual

in other languages

Related papers

Other documents