Canon VIXIA HF R30 User guide

Brand: Canon

Model: VIXIA HF R30

Category: Camcorders

Type: User guide

This manual is also suitable for

PUB. DIM-1032-000

English

Français

Español

HD Camcorder

Quick Guide

Caméscope HD

Guide rapide

Videocámara HD

Guía breve

COPY

Important Usage Instructions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright

owners and be contrary to copyright laws.

The Mains plug is used as the disconnect device. The Mains plug shall remain readily

operable to disconnect the plug in case of an accident.

CAUTION:

• Danger of explosion if the wrong type of batteries are attached. Use only the same type of

batteries.

• Do not expose batteries or product to excessive heat such as the inside of a car under

direct sunlight, fire, etc.

While using the compact power adapter, do not wrap it or cover it with a piece of cloth,

and do not place it in confined narrow spaces.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure,

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the product.

COPY

EnFrEs

FCC/IC NOTICE

HD Camcorder, VIXIA HF R32 / VIXIA HF R30 / VIXIA HF R300 systems

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and use in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the

manual. If such changes or modifications should be made, you could be required to stop operation

of the equipment.

Model ID0002 (including WLAN Module Model WM217)

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to

the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

The available scientific evidence does not show that any health problems are associated with using

low-power wireless devices. There is no proof, however, that these low power wireless devices are

absolutely safe. Low-power wireless devices emit low levels of radio frequency energy (RF) in the

microwave range while being used. Whereas high levels of RF can produce health effects (by

heating tissue), exposure to low-level RF that does not produce heating effects causes no known

adverse health effects. Many studies of low-level RF exposures have not found any biological

effects. Some studies have suggested that some biological effects might occur, but such findings

have not been confirmed by additional research. This model has been tested and found to comply

with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC

radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio

frequency (RF) Exposure rules.

Canon U.S.A., Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

This Class B digital apparatus complies with Canadian ICES-003.

COPY

In these safety instructions the word “apparatus” refers to the Canon HD Camcorder

VIXIA HF R32 / VIXIA HF R30 / VIXIA HF R300 and all its accessories.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

8 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

9 Only use attachments/accessories specified by the manufacturer.

10 Unplug this apparatus during lightning storms or when unused for long periods of time.

11 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

CA-110 identification plate is located on the bottom.

COPY

EnFrEs

Precautions About the Battery Pack

DANGER!

Treat the battery pack with care.

• Keep it away from fire (or it might explode).

• Do not expose the battery pack to temperature higher than 60 °C (140 °F).

Do not leave it near a heater or inside a car in hot weather.

• Do not try to disassemble or modify it.

• Do not drop it or subject it to shocks.

• Do not get it wet.

REGIONS OF USE

VIXIA HF R32 and VIXIA HF R30 are in compliance (as of January 2012) with the radio

signal regulations of the regions listed below. For details on other regions where they

can be used, make inquiries with the contacts listed on the back side of this instruction

manual.

REGIONS

Canada, Hong Kong S.A.R., USA, South Korea

Model

ID0002: VIXIA HF R30 / VIXIA HF R32

COPY

Important Note About the Memory

• Observe the following precautions while the ACCESS indicator is on or

flashing. Failing to do so may result in permanent data loss or damage to

the memory.

- Do not open the memory card slot cover.

- Do not disconnect the camcorder's power source or turn off the

camcorder.

- Do not change the camcorder’s operating mode.

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries.

• App Store, iPhone, iTunes, Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and

other countries.

• “x.v.Color” and the “x.v.Color” logo are trademarks.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

• “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation

and Sony Corporation.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• YouTube is a trademark of Google Inc.

• Facebook is a registered trademark of Facebook, Inc.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi Alliance.

• WPS as used on the camcorder’s settings, onscreen displays and in this manual signifies Wi-Fi Protected

Setup.

• DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the

Digital Living Network Alliance.

• Other names and products not mentioned above may be trademarks or registered trademarks of their

respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant with high-definition video

composed of 1,080 vertical pixels (scanning lines).

• ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY

MANNER THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR

PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE

MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET,

SUITE 300, DENVER, COLORADO 80206.

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding

MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a

personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to

provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.

COPY

EnFrEs

Package contents

• CA-110 Compact Power Adapter* [1]

* CA-110E including power cord, in Asia.

• BP-709 Battery Pack

•Stylus pen [2]

• HTC-100/S HDMI Cable [3]

• IFC-300PCU/S USB Cable [4]

• &/% Wi-Fi Basic Setup Guide

•2 Software CD-ROMs

- PIXELA CD-ROM**

&/% Contains VideoBrowser for managing, editing, and playing

back movies, and Network Utility for transferring recordings wirelessly to

a computer.

' Contains Transfer Utility for saving and transferring movies and

music files you can use as background music.

- : VIXIA CD-ROM

Contains the full-version Instruction Manual of the camcorder (PDF file).

See the explanation on next page.

** A printed Startup Guide for PIXELA’s software is also supplied. Refer to this

Startup Guide for details about the supplied software.

1234

COPY

Table of Contents

7 Package contents

10 Onscreen Icons and Displays

15 Charging the Battery Pack

18 Basic Preparations

21 Setting the Date/Time and Language

23 Using a Memory Card

26 Shooting Video and Taking Photos

30 Playing Back Movies and Viewing Photos

33 Playback on a TV Screen

35 Saving and Sharing Your Recordings

36 Abridged Specifications

About the Camcorder’s Wi-Fi Functions (&/% only)

You can make your camcorder an active part of your Wi-Fi network to fully

enjoy a variety of Wi-Fi functions. While these Wi-Fi functions are beyond the

scope of this Quick Guide, you can read the Wi-Fi Basic Setup Guide

supplied with the camcorder to complete the connection of the camcorder

to your home Wi-Fi network. And you have the complete information in the

full-version Instruction Manual (PDF file*).

About the Camcorder’s PDF Instruction Manual

This guide will get you started and show you how to use the most basic

functions of your camcorder to shoot video, take photos and play back your

recordings (using the camcorder or connecting it to your TV). To learn more

about the more advanced functions of your camcorder, to read important

handling precautions and to consult the troubleshooting section if an error

message is displayed, be sure to read the full-version Instruction Manual

(PDF file*). In this Quick Guide, the ; mark indicates reference page

numbers in the PDF file.

* Adobe

Reader

6 or later is required to view the PDF Instruction Manual.

COPY

EnFrEs

Installing the Camcorder’s Instruction Manual (PDF file)

1 Turn on the computer.

2 Insert the VIXIA CD-ROM into the computer’s disc drive.

3 Windows: Open the drive into which you inserted the CD-ROM

using Windows Explorer.

Mac OS: Use Finder and click on the CD-ROM icon.

4 Click/Double-click the Disc_Setup.exe icon.

5 In the installer panel, click [Instruction Manual of the

Camcorder] and select your language.

6 When the installation is complete, click [OK], then [Exit].

The installer will save the camcorder’s Instruction Manual (PDF file) on

the computer and will create a shortcut icon on the desktop for easy

access.

COPY

introduction

Onscreen Icons and Displays

Recording movies (using Story Creator)

1 Control button [FUNC.]: Open the [ Main Functions] panel (; 28)

2 Smart AUTO (A 27)

3 Face detection frame (; 99)

4 Touch & Track frame: Touch a moving subject on the screen to keep it

clearly in focus at all times. (; 101)

5 Control button [PHOTO] - Take a photo (A 26)

6 Control button [?]: Displays a shooting tip for the current story scene

7 Memory operation (; 186)

8 Intelligent IS (; 48)

9 Remaining battery level

- If the icon appears in yellow

or red, the battery pack is

almost empty. Replace

with a fully charged battery pack.

Aq Zoom (A 27)

Aa Recording mode (A 25)

As Recording standard (A 20)

Ad Current story scene (; 68)

Af Recommended scene length (; 68)

Ag Decoration: Add a fun personal touch using stamps, drawings, image mix

and more. (; 73)

100% 75% 50% 25% 0%

COPY

Onscreen Icons and Displays

EnFrEs

Recording movies

Manual mode Cinema mode

Ah Recording program: Recording programs allow you to change various

picture-related settings to your preference, or to use a special scene

recording program to apply the camcorder settings most appropriate for

a variety of situations. (; 95)

Aj Manual exposure: Correct the exposure manually for a picture darker/

brighter than the one obtained using the automatic exposure set by the

camcorder. (; 103)

Ak Manual focus (; 104)

Al Face detection: You can have the camcorder automatically detect people’s

faces and use this information to adjust the focus and set the best

exposure and color control settings for beautiful videos and photos.

(; 99)

Sq White balance: Change the setting so different lighting conditions do not

affect the colors in your recordings and white objects look truly white.

(; 107)

Sa Audio level indicator: Manually adjust the audio recording level.

(; 109)

Ss x.v.Color: The camcorder uses a color space with an extended gamut to

achieve deeper colors, closer to real life. (; 176)

Sd While recording/during playback: Scene counter (hours : minutes :

seconds); < Self timer (; 108)

Sf Image stabilizer (; 97)

Sg Tele macro (; 106)

COPY

Onscreen Icons and Displays

Sh Remaining recording time

* On the memory card; & In the built-in memory*

( Relay recording (; 41)*

- When there is no more free space on the memory, [& End] (built-in

memory*) or [* End] (memory card) will be displayed in red and

recording will stop.

* &/% only.

Sj Frame rate (; 94)

Sk Fader (; 102)

Sl Microphone attenuator: Use the attenuator to avoid audio distortions when

the sound is too loud. (; 173)

Dq Headphone output (; 111)

Da Custom control button (; 180)

Ds Level marker: Display onscreen markers to check your composition and

make sure horizontal or vertical lines do not appear crooked in your

recordings. (; 173)

Dd Wind screen off: Wind screen removes the background sound of wind when

recording outdoors. You may want to turn it off when recording indoors in

very quiet surroundings. (; 173)

Df Flicker reduction (; 173)

Dg Control button [FILTER 1] - Cinema-look filters: Use cinema-look filters to

create unique movies with distinctive looks. (; 70)

Dh In record pause mode: Total number of scenes

Dj Pre-recording: The camcorder will start recording video 3 seconds before

you press Y, so you do not miss important shooting

opportunities. (; 98)

COPY

Onscreen Icons and Displays

EnFrEs

Playing movies (during playback)

AVCHD movies:

MP4 movies:

Dk Eye-Fi Wireless Communication: Using an Eye-Fi card you can upload you

recordings wirelessly. Important restrictions apply so be sure to refer to

Using an Eye-Fi card (; 146).

Dl Scene number

Fq Playback control buttons (A 31)

Fa Data code: Displays information depending on the type of recording.

(; 66, 174)

Fs Volume and background music balance controls (; 55, 84)

Fd File number (; 176)

Ff Volume controls (; 56)

COPY

Onscreen Icons and Displays

Viewing photos

Fg Control button [Edit] - Open the Edit panel (; 171)

Fh Current photo / Total number of photos

Fj Control button [h] - Photo jump (; 119)

Fk Control button

[Ð] - Slideshow: Play back a slideshow of your photos and

use your favorite background music. (; 122)

Fl Control button [f] - Return to the [Photos] index screen (; 118)

COPY

EnFrEs

step 1

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the

compact power adapter. When you use the compact power adapter, the

power of the battery pack will not be consumed. Charge the battery pack

before use.

Connect the compact power

adapter.

1 Connect to the adapter (for Asia only).

2 Plug into a power outlet.

Connect the camcorder.

Plug into the DC IN terminal.

Insert the battery pack.

1 Press softly into the battery attachment

unit.

2 Slide up until it clicks in place.

Charging will start when the

camcorder is turned off.

Lamp off

(camcorder turned off)

Red lamp on

(charging)

Lamp off

(battery pack fully charged)

COPY

Charging the Battery Pack

Charging the supplied BP-709 Battery Pack will take approximately

2 hours 50 minutes. A fully charged battery pack will allow for the

following operations (movies in FXP mode).

All given times are approximate and vary according to recording mode

and charging, recording or playback conditions.

See Charging, Recording and Playback Times (; 213) for details.

IMPORTANT

• The battery pack will be charged only when the camcorder is off.

• Do not connect to the camcorder’s DC IN terminal or to the compact power

adapter any electrical equipment that is not expressly recommended for

use with this camcorder.

• Do not connect the supplied compact power adapter to voltage converters

or special power sources such as those on aircraft, DC-AC inverters, etc.

NOTES

• We recommend charging the battery pack in temperatures between 10 °C

and 30 °C (50 °F and 86 °F). If either the ambient temperature or the

battery pack’s temperature is outside the range of approx. 0 °C to 40 °C

(32 °F to 104 °F), charging will not start.

• If remaining battery time is an issue, you can power the camcorder using

the compact power adapter so the battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge

them on the day of use, or the day before, to ensure a full charge.

Charging times

Typical recording Playback

Memory card 25 min. 1 hr. 15 min.

&/%

Built-in memory

25 min. 1 hr. 15 min.

COPY

Charging the Battery Pack

EnFrEs

• We recommend that you prepare battery packs to last 2 to 3 times longer

than you think you might need.

•

USA and Canada only

: The Lithium ion/polymer battery that

powers the product is recyclable. Please call

1-800-8-BATTERY for information on how to recycle this

battery.

COPY

step 2

Basic Preparations

Before you begin, make basic adjustments and learn about a few of the

frequently-used parts.

See Using the Grip Belt (; 23), Opening the Lens Cover and

Adjusting the LCD Screen (; 24) for details.

Fasten the grip belt.

Adjust it so you can reach the zoom

lever with your index finger, and

Y with your thumb.

Open the LCD panel and adjust

the angle.

1 Rotate it up to 90 degrees down (for

example, to record with your hand

extended above a crowd).

2 Rotate it up to 180 degrees toward the

lens (for example, to record video of

yourself).

Become familiar with the touch

screen.

In addition to touching buttons to

select items, you can also drag your finger

across the screen for operations such as

scrolling menus. While applying pressure,

swipe your finger across the screen.

You can also use the supplied stylus for

more precise operations.

See Handling Precautions (; 205), Cleaning ( ; 209) for important

information about how to take care of the touch screen.





COPY

Basic Preparations

EnFrEs

IMPORTANT

• The camcorder uses a pressure-sensitive touch screen. Press firmly

when using touch operations.

Set the camera mode and

recording standard.

Press to open the HOME menu.

From there, you can access the

[ Camera Mode] and [ Recording

Standard] menus.

Camera mode

Touch [ Camera Mode] and then select

one of the following camera modes.

[N] In mode, the camcorder takes

care of most of the settings.

[n] In mode, you have access to

all the menus and can use a wide

array of advanced functions.

[ ] In mode, you can give your

recordings a cinematic look and still

have access to all the menus.

See Advanced Functions (; 89) for more details.

COPY

Basic Preparations

Recording standard

Press . Then, touch [ Recording

Standard] and choose to record AVCHD

movies or MP4 movies.

[v] If you plan on showing your movies

on an HDTV, then select this option

so you can play them back with

fantastic quality.

[é] Story Creator mode allows you to

create video stories by following a

story theme and receiving shooting

tips.

[ ] MP4 movies have smaller file sizes

so they are much easier to upload to

the Web and transfer to other

devices.

COPY

Page is loading ...

Canon VIXIA HF R30 User guide

Brand: Canon

Model: VIXIA HF R30

Category: Camcorders

Type: User guide

This manual is also suitable for

Download PDF

report

Canon VIXIA HF R30 User guide

This manual is also suitable for

Canon VIXIA HF R30 User guide

Related papers

Other documents