Panasonic NCPC-BARE, NCPC-2.1, NCPC-2.5 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Panasonic NCPC-BARE Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.panasonic.ca
Made for Panasonic Canada Inc.
5770 Ambler Drive Mississauga, Ontario L4W 2T3
Phone: (905) 624-5010 Fax: (905) 238-2362
Power and
Transmission
DESCRIPTION
PoE Voltage
Adapter/Splitter
COBRA
Series
PoE Voltage
Adapter/Splitter
Device end power adapter used for non
PoE enabled IP devices such as an IP
camera, VoIP and wireless access points.
This unit provides ‘detect’ signal to the
midspan. PoE signal is separated into
normal data and power outputs.
Power Cables for PoE
Voltage Adapter/Splitter
Power cables for use with the adapter/
splitter to provide connections to a
non-PoE camera or device.
All cables are 30cm in length.
NC-4HP
NCS-5V/ NCS-12V/NCS-24V
NCS-5V - outputs 5VDC
NCS-12V - outputs 12VDC
NCS-24V - outputs 24VDC
NCS-12V shown
NCPC-BARE - Wire Pair Connections
NCPC-1.3 - 1.3mm Jack connection
NCPC-2.1 - 2.1mm Jack Connection
NCPC-2.5 - 2.5mm Jack Connection
NC-4HP
Power Cables for Adapter /Splitter
/