BT7805
50mm HEAVY DUTY NON TILTING CEILING MOUNT
Copyright 2006. B-Tech International, its distributors and dealers are not responsible for damage or injury caused by improper installation.
PLEASE KEEP THIS PARTS LIST FOR FUTURE REFERENCE
PARTS LIST
B-Tech International Ltd, 4 Mer
idian Centre, Ne
w Addington, Croy
don, CRO 9U
G, UK. Tel: +44 (0)8
44 800 0445 Fax: +44 (0)84
4
800 0446 Email: [email protected]mB-Tech PRO-AV bvba, Brix
tonlaan 32, Zaventem 1930, Brussels, Belgi
um.
Tel: +32 (0)2 720 92 71 Fax: +32 (0)2 725 42 15 Email: [email protected]B-Tech Audio Video Mou
nts, Buffalo, NY
14215, USA. Tel: (1)800 975
5812 Fax: (1)800 592 2876 Email: [email protected]m B-Tech International (Hon
g Kong) Ltd, 23rd Floor, Manulif
e Tower,
169 Electric Road, North Point, HK. Tel: (+852) 2556 7337 Fax: (+852) 2556 7321 Email: [email protected]m.hkwww.btechavmounts.com
IMPORTANT
NOT SUITABLE FOR WALL MOUNTING. FIXING SCREWS ARE NOT INCLUDED WITH THIS PRODUCT.
B-TECH HIGHLY RECOMMEND THIS PRODUCT BE INSTALLED BY A SUITABLY QUALIFIED PERSON.
THE INSTALLER MUST BE SATISFIED THAT THE TYPE OF FIXINGS USED ARE SUITABLE FOR THE
TYPE OF CEILING THE PRODUCT IS TO BE MOUNTED TO. CARE MUST BE TAKEN AS TO WHERE
THIS PRODUCT IS LOCATED AS SOME CEILINGS ARE NOT SUITABLE FOR INSTALLATION. WHEN
DRILLING HOLES, KNOWLEDGE MUST BE OBTAINED TO AVOID CONTACT WITH ANY ELECTRICAL
CABLES AND/OR GAS AND WATER PIPES CONTAINED WITHIN THE CEILING.
Attention!
Ensure safety bolt (Part 4)
is in place before any AV
equipment is fitted
v.0107 ORBX
1
2
4
5
6
3
No PART NAME DESCRIPTION QTY
1 CEILING MOUNT ASSEMBLY MOUNTS TO CEILING 1
2 COVER PLATE HALF CLIPS ON TO HIDE SCREWS 2
3 M10 X 10 GRUB SCREW CLAMPS THE POLE RIGID 2
4 M8 X 60 SAFETY ALLEN SCREW PASSES THROUGH THE POLE 1
5 TAPERED MOULDING FITS AROUND THE POLE 1
6 5mm ALLEN KEY TO TIGHTEN PARTS 3 AND 4 1