American Standard 0268.400.222 User manual

0268.400.222
American Standard
Brand
American Standard
Model
0268.400.222
Category
AV equipment stands
Type
User manual
J13
Revised
© 2008 AS America Inc.
RAVENNA™
PEDESTAL SINK
VITREOUS CHINA
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
20
(508mm)
20-1/4 (514mm)
3-1/4
(83mm)
4
(102mm)
8
(203mm)
FINISHED WALL
5-1/4 (133mm)
PEDESTAL ANCHORING
SCREW HOLES 5/16 (8mm) DIA.
PEDESTAL
TO WALL
3/4" (19mm) DIA.
HOLES FOR
ANCHOR BOLTS
34
(864mm)
REF.
OPEN
TO
FLOOR
24-1/2
(622mm)
9-3/8
(238mm)
REF.
8
(203mm)
OPTIONAL
TOWEL BAR
7
(178mm)
20-1/2
(521mm)
*
*
23
(584 mm)
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
SUPPLIES
AS REQ'D
FINISHED
FLOOR
8 (203mm)
6-1/2 (165mm)
DRAIN
CHASE
PEDESTAL
SIDE SECTION
* See faucet section for additional models available
RAVENNA™ PEDESTAL SINK
• Contemporary sleek design
• Made from vitreous china
• Rear overow
• Faucet ledge with generous shelf area
• Supplied with mounting kit
• Optional integral mounted towel bar
(ordered separately, installed by customer)
• Shown with 2000.101 Ceramix single lever faucet
(not included)
❏ 0268.800 Faucet holes on 8" (203mm) centers
❏ 0268.400 Faucet holes on 4" (102mm) centers
❏ 0268.100 Center faucet hole only
Nominal Dimensions:
24-1/4" x 20" x 34"
(616 x 508 x 864mm)
Separate Components:
❏ 0268.008 Pedestal top-8" (203mm) centers
❏ 0268.004 Pedestal top-4" (102mm) centers
❏ 0268.001 Pedestal top-Center hole only
❏ 0041.000 Pedestal only
Bowl sizes:
19-3/8" (492mm) wide
11-7/8 (302mm) front to back
6" (152mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
• CAN/CSA B45 Series
Revised 2/08
Recommended Component:
❏ Integral Towel Bar: 3520.000
(Specify 002 Chrome or 295 Satin Nickel)
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
  • Page 1 1

American Standard 0268.400.222 User manual

0268.400.222
American Standard
Brand
American Standard
Model
0268.400.222
Category
AV equipment stands
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents