Topeak TT2573B Owner's manual

Brand: Topeak

Model: TT2573B

Type: Owner's manual

Install new chain pin or remove old chain pin.

Use Primary Chain Link Fence to install

or remove chain pin. Use Secondary

Chain Link Fence to loosen stiﬀ links.

Primary Chain

Link Fence

Secondary

Chain Link Fence

4mm

Allen

key

WARNING

Chain Pin Tool

Press chain pin

as little as

necessary to

loosen the

stiﬀ link.

4mm for

chain pin breaker

+ +

15g14g

USING CHAIN TOOL

HEXUS™ X USER'S GUIDE

Tire Lever

Air Pressure

Release Button

Presta Core tool

8 mm 5 mm 6 mm 5 mm 4 mm 4 mm

4 mm

3 mm

4 mm

2.5 mm 2 mm Phillips T15T25T30

2 mm

4 mm

2.5 mm

Chain

Hook

T25 Torx

T30

Torx

Chain pin breaker

6 mm

3 mm 5 mm

Phillips

Chain

Tool

8 mm

T25

T15

When pressing in the chain pin, push down on the

top of the chain to keep it fully engaged in the

chain tool cradle. Make sure the press pin of the

chain tool is centered against the chain pin.

Inspect chain rivet again and be

sure chain links can bend freely

after replacement.

* The chain tool is compatible with

single and multi-speed chains up to 12

speed, NOT including Campagnolo® 11

speed hollow pin chains.

WARRANTY

M-TT2573B-GB 09/17

USING TIRE LEVERS BUILT-IN PRESTA

CORE TOOL

USING AIR PRESSURE

RELEASE BUTTON

TOOL MAINTENANCE

Use T25 Torx bit

on tire lever to adjust

the folding resistance.

USING CHAIN HOOK AND CHAIN TOOL

4 mm

Allen

key

USING T25 TORX

Tighten disc brake rotor bolts with the T25 Torx bit.

4mm

Allen Key

USING 8MM ALLEN KEY

HEXUS™ X USER'S GUIDE

Tighten or

remove

two-piece

Presta valve

cores.

Insert 5mm Allen key into 8mm tool bit.

8 mm

T25

T15

2-year Warranty: All mechanical components against manufacturer defects only.

Warranty Claim Requirements

To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty

begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration,

modiﬁcation, or used in any way not intended as described in this manual.

* The speciﬁcations and design are subject to change without notice.

Please contact your Topeak dealer with any questions.

For USA customer service call: 1-800-250-3068 / www.topeak.com

1. Lubricate and maintain tool with Teon® based lubricant when needed.

2. To prevent rusting, keep tool dry.

MAINTENANCE

* Campagnolo® is a registered trademark of Campagnolo S.r.I.

* Teon® is a registered trademark of DuPont.

Topeak TT2573B Owner's manual

Topeak TT2573B Owner's manual

Topeak TT2573B Owner's manual

Related papers

Other documents