2. Transmitter
  3. LED*

Transmitter LED* Owner's manual

  • Hello! I've reviewed the user manual for the Programmable LED Light. This manual describes a light that uses energy-efficient LEDs and provides different flashing options. I'm ready to assist with any questions you might have about the installation, operation, or functionality of this product.
  • What voltage does the flashing light operate with?
    How can I select the blinking light mode?
    How many blinking light modes are available?
    Will the flashing light remember my settings after being disconnected?
PROGRAMMABLE LED LIGHT
2480 South 3850 West, Suite B
Salt Lake City, UT 84120
(866) 975-0101 • (866) 975-0404 fax
www.transmittersolutions.com
PROGRAMMABLE LED LIGHT OVERVIEW
This flashing light is an innovative product operating with high efficiency LEDs. This technology
provides high intensity light with practically no heat emissions and extremely low energy con-
sumption. It is particularly suited to systems where limited energy consumption is a main
priority. The programmable model has two wink signal options. It operates with 24V AC/DC.
READ THIS ENTIRE MANUAL BEFORE INSTALLATION.
ASSEMBLY
The blinking signal of the flashing light does not require any additional circuits.
Power 24 V AC/DC supply to pins 1 and 2 on the M1 terminal.
pin 1 and 2 = 24 V ac.
Pin 1 = + 24 V DC
pin 2 = - 24 V DC
Other terminal not used.
Press the P button to select the required type of blinking light. There are two options:
- traditional flashing light at first connection.
- pressing P once: slow sequence
- pressing P twice: fixed light.
Flashing function is memorized and remains the same even if the flashing light is disconnected
from the power supply.
/