stufurhome ST1300MB Installation guide

stufurhome
Brand
stufurhome
Model
ST1300MB
Type
Installation guide

This manual is also suitable for

stufurhome ST1300MB is a single-lever kitchen mixer that is easy to install and maintain. It features a pull-out hose that makes it easy to clean hard-to-reach areas of your sink. The mixer also has a quick connector that makes it easy to connect the hose to the faucet body. The ST1300MB is made of durable materials and is backed by a limited lifetime warranty.

stufurhome ST1300MB is a single-lever kitchen mixer that is easy to install and maintain. It features a pull-out hose that makes it easy to clean hard-to-reach areas of your sink. The mixer also has a quick connector that makes it easy to connect the hose to the faucet body. The ST1300MB is made of durable materials and is backed by a limited lifetime warranty.

INSTALLATION
INSTRUCTIONS
● We recommend that this product is installed by a qualified professional contractor.
● Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make
sure this product is the correct model and you have all the parts required for installation and using.
● Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the taps.
●
Turn off water supply before commencing work, this should be done at the isolating valves of inlet feeds if fitted or main sto
pcock.
● Please read these instructions carefully and keep it for future reference.
Important
Maintainance
We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula
too frequently. The product should be always cleaned only with soapy water and rinsed with clean water and dried with a soft cloth.
Single-lever kitchen mixer
ST1300CH/ST1300MB
Dimensions
Unit:inches
15.72″
9.49″
7.66″
4.00″
Ø
1.38″
max1.18″
MIXER BODY
HANDLE CAP
RETAINING
NUT
CARTRIDGE
COVER
CARTRIDGE
GRUB
SCREW
HANDLE
LEVER
Installation
To remove the cartridge.
First shut off the water supply to the tap.
1. Screw out the handle lever from the cap.
2. Loosen the grub screw in handle, but do not remove it.
3. Take off the handle, unscrew the cartridge cover.
4. Using a correct size spanner unscrew the retaining nut.
5. Pull the cartridge and wash it with clean running water.
6. Dry and lightly grease the seals (only use silicone grease)
7. Replace them in turn.
Connect the flexible hose to the copper pipe.
Pass the flexible hose and threaded pipe through the counter,then place the plastic washer,rubber washer, and metal
washer to the threaded pipe, tighten the screw nut. Check that the faucet body is correctly positioned and fully tighten
the head screw.
Place the hose weight kit to the pull out hose and adjust the height to ensure
that the weight kit can hangs freely, then fix the weight kit.After that
insert the end of the pull out hose to the quick connector.
1.
2.
3.
Pull Out Hose
Weight kit shall be fixed
here in the hose
(About 400 mm from
the counter).
Faucet Body
Threaded Pipe
Plastic Washer
Rubber Washer
Metal Washer
Screw Nut
Head Srew
Flexible Hose
Hose Weight Kit
Pull Out
Hose
Quick Connector
Copper Pipe
  • Page 1 1
  • Page 2 2

stufurhome ST1300MB Installation guide

stufurhome
Brand
stufurhome
Model
ST1300MB
Type
Installation guide
This manual is also suitable for

stufurhome ST1300MB is a single-lever kitchen mixer that is easy to install and maintain. It features a pull-out hose that makes it easy to clean hard-to-reach areas of your sink. The mixer also has a quick connector that makes it easy to connect the hose to the faucet body. The ST1300MB is made of durable materials and is backed by a limited lifetime warranty.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents