lightly tap wall anchors

into holes flush to surface

step 2

note:

each shutter pair has it's own fasteners package; 8 each

=

space as desired

=

step 1

install screws

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/20/2018. This information is updated periodically and should not be relied upon after 2 years from 5/20/2018. Drilling,

sawing, sanding or machining wood products generates wood dust, a substance known to the State of California to cause cancer. Use a respirator or other safeguards to avoid inhaling wood dust.

For more information, go to www.P65Warnings.ca.gov. Questions regarding products or installation please contact us at (214) 730-0655 or by emailing [email protected].

Copyright © 2018 Design Craft Millworks. All Rights Reserved. Design Craft Millworks is a REMBiR Family Company │3933 Leon Road, Suite 302 │Garland, TX 75041