Design Craft MIllworks 600090 Installation guide

Hello! I am an AI chatbot trained to assist you with the Design Craft MIllworks 600090 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

lightly tap wall anchors

into holes flush to surface

step 2

note:

each shutter pair has it's own fasteners package; 8 each

space as desired

step 1

hold shutter in desired location &

drill 4 mounting holes for each

shutter with

1/4" bit

shutter

fasteners

Installation Instructions, Shutter

step 3

install screws

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/20/2018. This information is updated periodically and should not be relied upon after 2 years from 5/20/2018. Drilling,

sawing, sanding or machining wood products generates wood dust, a substance known to the State of California to cause cancer. Use a respirator or other safeguards to avoid inhaling wood dust.

For more information, go to www.P65Warnings.ca.gov. Questions regarding products or installation please contact us at (214) 730-0655 or by emailing [email protected].

Design Craft MIllworks 600090 Installation guide

Other documents