2. Electro-Voice
  3. XLCi-BGK-FG Bottom Grid Kit

Electro-Voice XLCi-BGK-FG Bottom Grid Kit Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Electro-Voice XLCi-BGK-FG Bottom Grid Kit Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
XLCi-BGK-FG Bottom Grid Kit
Assembly and
Installation Instructions
Step 1
Assemble the sidearms to the enclosure rigging
plates using the bottom grid kit and hardware.
Step 3
Install the spreader bar between sidearms and align with numbered hole, attaching with nuts and shoulder bolts.
Enclosure
Sidearm
Split Washer (x2)
1.625 in
(41.3mm)
Long Bolt (x1)
Split Washer (x1)
Nut (x1)
Torque all bolts
to 70-90 in-lbs.
(84-108 cm-kg)
1.625 in
(41.3mm)
Long Bolt (x2)
Nut (x2)
Spreader Bar
Nut (x1)
Nut (x1)
Shoulder Bolt (x1)
Shoulder Bolt (x1)
Hole in Sidearm to be
selected by end user.
Step 2
Torque all bolts to 70-90 in-lbs (84-108 cm-kg).
MAKE SURE ALL LINKING HARDWARE IS TIGHTENED TO 70-90 IN-LBS AND THE SHOULDER
BOLTS ARE TIGHTENED TO THE SPREADER BAR BEFORE LIFTING THE ARRAY.
Bottom Grid Kit for berglass weatherized XLCi install loudspeakers.
XLCi-BGK-FG Bottom Grid Kit
Assembly and
Installation Instructions
Step 4
Pull back grid and array using the pull-back points.
DO NOT PULL BACK GRID USING SIDE HOLES ON SIDEARMS. ONLY PULL BACK GRID FROM THE
SUPPLIED SPREADER BARS.
Pull-Back Point
Germany:
Bosch Sicherheitssysteme GmbH Bosch Security Systems, Inc.
Robert-Bosch-Ring 5 12000 Portland Avenue South
85630 Grasbrunn Burnsville MN 55337
Germany USA
www.electrovoice.com
© Bosch Security Systems 2015 | Data subject to change without notice.
2015.10 | 01 | F.01U.318.348
/