Studiologic AC/DC Adaptor 9 VDC User manual

Brand: Studiologic

Model: AC/DC Adaptor 9 VDC

Type: User manual

Studiologic AC/DC Adaptor 9 VDC is designed to use only with original Studiologic products such as MIDI-controllers and keyboard models requiring an external 9 VDC power supply. Intended for indoor use in dry environments, it features a wide supply voltage range from 100V to 240V AC, making it suitable for worldwide operation. The interchangeable mains power plugs (EU, USA, GB, AU) allow for easy adaptation to different countries' electrical outlets. With an output voltage of 9.0 VDC and a maximum output current of 0.

Declaration of Conformity

Fatar Srl

Zona Ind.le Squartabue

62019 Recanati MC Italy

declares that this product complies with the following European

Directives and related standards:

2006/95/EC

Low Voltage Directive

EN 60950-1: 2005

General requirements – Safety of

Information technology equipment

2004/108/EC

Electromagnetic Compatibility Directive

(EMC)

EN 55011: 2000

Limits and methods of measurement -

Industrial, scientific and medical

equipment - Radio-frequency

disturbance characteristics

EN 55014-1: 2006

Electromagnetic compatibility -

Requirements for household

appliances, electric tools and similar

apparatus - Part 1: Emission

EN 55022 2008

Information technology equipment -

Radio disturbance characteristics -

Limits and methods of measurement

IEC 61204-3 2000

Low-voltage power supplies DC output -

Part 3: Electromagnetic compatibility

(EMC)

IEC 61000-6-1 2005

Electromagnetic compatibility (EMC) -

Part 6-1: Generic standards - Immunity

for residential, commercial and light-

industrial environments

Technical files are maintained at corporate head-quarter of Fatar Srl,

62019 Recanati MC, Italy.

Above declarations are void by modifications of the device without

approval, or unauthorized servicing.

RoHS Conformity

This is to certify that the product is RoHS compliant and meet the

requirements and specified limits of restricted substances according

2002/95/EC directive.

WEEE

This product is marked with the WEEE symbol to comply with the

European Union’s Waste Electrical & Electronic Equipment (WEEE)

Directive 2002/96/EC. The symbol indicates that this product should

not be treated as household waste. It must be disposed and recycled

as electronic waste. Please assist to keep our environment clean.

FATAR Srl

Zona Ind.le Squartabue

62019 Recanati MC

ITALY

www.fatar.com

No part of this manual may be reproduced or transmitted in any form

or by any means without prior consent of the copyright owner.

Version 07.2010 • HeBl

User Guide

AC/DC Adaptor

9 VDC

MIDI Controller / Keyboard

AC/DC Adaptor

9 VDC

Input

Welcome!

Thank you for choosing this AC/DC Plug-In Power Supply. You have

obtained a state-of-the-art product from the renowned manufacturer

Studiologic by Fatar.

Intended Purpose

The power supply is intended to use only with original Studiologic

products such as MIDI-controllers and keyboard models requiring an

external 9 VDC power supply.

It can be operated worldwide due to its wide supply voltage range from

100V to 240V AC and to the interchangeable mains power plugs.

Any usage other than described above is not permitted and can

damage the product and lead to associated risks such as short-circuit,

fire, electric shock etc.

Also unauthorised conversion and/or modification of the device are

inadmissible because of safety and approval reasons (CE).

Delivery Content

• Plug-In Power Supply

• 4x Mains Plug Adapters (EU, USA, GB, AU)

• User Guide

Symbols Explanations

Note!

Indicates important information. Read the user guide.

Protection class 2 (double or reinforced-insulation)

Only for use in dry indoor areas!

Important Safety Instructions

Please read the entire user guide thoroughly and keep

it for further reference.

• The power supply is for indoor use only; keep it in dry

environment.

• Do not use the power supply if there are signs of any damage

to the housing, plug or cable.

• Disconnect the power supply from mains when not in use,

during maintenance and cleaning.

• Never attempt to open the power supply.

• Keep away from children’s reach.

Moisture:

If the device is moved from a cold place to a warm room,

condensation may occur inside. To avoid damage please allow the

device to reach room temperature before using it.

Cleaning and Maintenance

Other than an occasional cleaning, the power supply is maintenance-

free. For cleaning the housing, use a lint-free, antistatic and dry micro-

fibre cloth.

Before starting to clean the power supply, disconnect

it from mains and from the connected consumer load.

Never use any abrasive detergent, cleaning agents or

petrol and alcohols, which may cause damage to the

surface.

Warranty

Every Fatar Studiologic product has been carefully manufactured,

calibrated and tested. All this enables a warranty of two years.

Damages due to incorrect transport, mounting or handling are not

covered by this warranty. All this is based on general terms and

condition of the local distributor / FATAR Srl, Italy. Compensation of

more than the price of the device is excluded.

Do not open the device or make unauthorised

modifications to the circuit inside. This will void the

warranty claim.

Repair works must only be carried out by qualified

servicing personnel.

State of the Art

To ensure maximum quality, all devices of Studiologic by FATAR are

always engineered to be state-of-the-art products. Therefore updates,

modifications and improvements are made without prior notice.

Technical specification and product appearance may vary from this

user guide.

Specifications

Adaptor model KSAA0900050W1UV-1

Input voltage 100-240 VAC ~ / 50-60Hz

Input current 0.18A max.

Output voltage 9.0 VDC =

Output current 0.5A max

Output connector DC plug (ø 5.5mm/0.217”)

Cable length 1.8m

Operating temperature 0°C to +40°C, 20% to 85% RH

Dimensions (without adapters) 65x36x34mm (LxWxH)

Weight (without adapters) 70g

Protection class 2 (double insulated)

Certifications

Operation

Mains check

Before connecting the power supply to mains, ensure that the existing

AC line voltage and frequency correspond to the electrical ratings on

the label plate of the power supply or specifications in the user guide.

Do not use other than from Studiologic specified

power supply unit to operate your product.

The use of non-approved power supply accessory can

cause risks such as short circuit, fire and damage to

the Studiologic product. In these cases any liability is

excluded from Studiologic by FATAR.

Setting up power supply

Insert the relevant mains input plug adaptor that is included

(depending on the country). There are different mains plugs e.g. Euro,

USA, UK, Australia available, that connect to the primary contacts [1]

by pushing the desired plug adaptor into the housing slot. Please

ensure the plug adaptor “clicks” audibly into the locking latch [2]. To

swap a mains input plug, push down the release button [3] and move

the plug adaptor outwards.

Power supply Mains plug adapters

PUSH

R1009

TOP

1 = adaptor slot

2 = adaptor lock

3 = release button

4 = consumer DC plug

A = Europe (except CH & UK)

B = USA / Japan

C = United Kingdom

D = Australia

Connecting the equipment

Please refer to the manual of your MIDI controller or Digital Piano,

how to connect the power supply to the Studiologic equipment.

Basic setup of power supply and equipment:

Please observe the correct polarity of the equipment jack:

Switch power “OFF” on equipment before plug in the

power supply to mains.

The housing of the power supply can heat up during

prolonged operation. Therefore, ensure adequate

ventilation. Do not cover the device!

Studiologic AC/DC Adaptor 9 VDC User manual

Studiologic AC/DC Adaptor 9 VDC User manual

Studiologic AC/DC Adaptor 9 VDC User manual

Related papers

Other documents