Bunker Hill Security 96105 Assembly And Operation Instructions Manual

Bunker Hill Security
Brand
Bunker Hill Security
Model
96105
Type
Assembly And Operation Instructions Manual

Bunker Hill Security 96105 is a 4-way digital camera switch box that allows you to connect up to four cameras to a single TV or monitor. It has a built-in speaker that allows you to hear the sounds made from the camera in operation, and a volume control so you can adjust the volume to your liking. The switch box also has a support stand so you can set it up at an angle for easy viewing.

Here are some of the possible use cases for the Bunker Hill Security 96105:

  • Monitor your home or business with multiple security cameras
  • Keep an eye on your children or pets while you're away
  • Use it as a baby monitor

Bunker Hill Security 96105 is a 4-way digital camera switch box that allows you to connect up to four cameras to a single TV or monitor. It has a built-in speaker that allows you to hear the sounds made from the camera in operation, and a volume control so you can adjust the volume to your liking. The switch box also has a support stand so you can set it up at an angle for easy viewing.

Here are some of the possible use cases for the Bunker Hill Security 96105:

  • Monitor your home or business with multiple security cameras
  • Keep an eye on your children or pets while you're away
  • Use it as a baby monitor
4-WAY DIGITAL CAMERA
SWITCH BOX
Model
96105
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2SKU 96105
For technical questions, please call 1-800-444-3353.
Electrical Requirements AC/DC Adapter, 120 V AC, 12V DC, 200
Ma
Cord Length 6’ Long
Material Molded Polystyrene Housing
Overall Dimensions 8-1/8” W x 5-7/8” L x 1-3/8” H
Camera Time Intervals 3, 10, 20 and 30 seconds
Power Consumption 0.8 Watt
Functions 4-position slider switch; 4 camera/chan-
nel with LED indicator; 4 each audio-video
RCA® input jacks and 1 each audio/video
output jacks
Also includes AC/DC Adapter, double-end male RCA®
plug TV cord
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
ELECTRICAL SAFETY
Grounded product must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter plugs.
Check with a qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the tools should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
Double insulated tools are equipped with a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install a polarized outlet. Do not change the plug
in any way. Double insulation eliminates the need for the three wire grounded
power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Do not expose the Camera Switch Box to rain or wet conditions. Water enter-
ing a power tool will increase the risk of electric shock.
1.
2.
3.
4.
Page 3SKU 96105
For technical questions, please call 1-800-444-3353.
Do not abuse the Power Cord. Never use the Power Cord to carry the Camera
Switch Box or pull the Plug from an outlet. Keep the Power Cord away from
heat, oil, sharp edges, or moving parts. Replace damaged Power Cords im-
mediately. Damaged Power Cords increase the risk of electric shock.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operating
the Camera Switch Box. Do not use this product while tired or under the influ-
ence of drugs, alcohol, or medication. A moment of inattention while operating
this product may result in serious personal injury.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Camera Switch Box. Always
unplug the Camera Switch Box from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
Store the Camera Switch Box out of reach of children and other untrained
persons.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazardous
when used on another product.
SERVICE
Camera Switch Box service must be performed only by qualified repair per-
sonnel. Service or maintenance performed by unqualified personnel could result
in a risk of injury.
When servicing this product, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the Camera Switch Box. These carry im-
portant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Do not use this product in a damp or wet location.
5.
1.
2.
3.
4.
1.
2.
1.
2.
Page 4SKU 96105
For technical questions, please call 1-800-444-3353.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the
power cord or plug is damaged. If damaged, have it repaired by a service facil-
ity before use. If the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If the
tool should electrically malfunction or break down, grounding provides a low resis-
tance path to carry electricity away from the user, reducing the risk of electric shock.
(See 3-Prong Plug and Outlet.)
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached to
an electrically “live” terminal. (See 3-Prong Plug and Outlet.)
Your tool must be plugged into an appropriate outlet, properly installed and grounded
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See 3-Prong Plug and Outlet.)
3-Prong Plug and Outlet Outlets for 2-Prong Plug
1.
2.
3.
Page 5SKU 96105
For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
OPERATION
Set Up
CH1
CH2
CH3
CH4
Audio/Video Output
Figure 1
Figure 2
On/Off Switch
Connect the RCA® plugs from your camera(s) to the camera input on the rear of
the Camera Switch Box. There are plugs for four channels (CH1, CH2, CH3 and
CH4)-see Figure 1.
Each channel has a input for VIDEO and AUDIO. Make certain to use the correct
plug for each channel-see Figure 1. Plugs are color coded; make certain that the
correct color is plugged into both the camera and the video or audio input.
Connect the Output on the Camera Switch Box (see Figure 1) to your TV or moni-
tor.
Plug in the AC/DC adapter into a 120V, AC outlet. Connect the plug to the Camera
Switch Box as shown in Figure 1.
1.
2.
3.
4.
AC/DC Adapter Jack
Page 6SKU 96105
For technical questions, please call 1-800-444-3353.
Turn “ON” the power switch-see Figure 2.
Operation
The Camera Switch Box will automatically switch between camera images. Each
image will be monitored according to the amount of time selected.
Select
Mode
Bypass
Channel
selections
Figure 3
Press the SELECT button to choose either AUTO mode or any channel; CH1, CH2,
CH3, CH4. Either one, two, three or all four channels may be chosen. Press Select
as each LCD lights up next to the AUTO function or channel.
Selecting AUTO mode will switch consecutively between each of the four channels
for the amount of time you have selected (see TIME switch instructions #5 below).
Selecting BYPASS mode allows you to skip any channel in the viewing cycle. Press
the SELECT button to illuminate the LED for the desired channel. Press the MODE
button (see Figure 3) to illuminate the BYPASS LED. Press SELECT again to enter
the AUTO mode. You may bypass up to three channels at a time.
To reinstate channels and have them as part of the viewing cycle, press the SE-
LECT button to select the channel. Press MODE to reset the channel into the
AUTO cycle.
To select the amount of time for each Camera in the cycle, move the TIME switch on
the side panel to the desired setting. There are four settings for TIME; 3 seconds,
10 seconds, 20 seconds and 30 seconds.
The Camera Switch Box has a support stand located on the bottom. To set the
Camera Switch Box up at an angle, pull out the support stand and use it to support
the Camera Switch Box.
5.
1.
2.
3.
4.
5.
6.
Power
Switch
Time Switch
Volume Control
Page 7SKU 96105
For technical questions, please call 1-800-444-3353.
Volume Control
When used in conjunction with built in audio function, the speaker on the front of
the Camera Switch Box will allow you to hear the sounds made from the camera
in operation.
To turn up or down the VOLUME, turn the VOLUME Wheel located at the side of
the Camera Switch Box next to the TIME Switch.
INSPECTION, MAINTENANCE, AND CLEANING
WARNING! Make sure the Power button of the Camera Switch Box is in its “OFF”
position before performing any inspection, maintenance, or cleaning procedures.
BEFORE EACH USE, inspect the general condition of the Camera Switch Box.
Check for cracked or broken parts and any other condition that may affect its safe
operation. If abnormal noise or vibration occurs, have the problem corrected before
further use. Do not use damaged equipment.
Protect the Camera Switch Box from exposure to water or corrosive materi-
als. It should be kept clean and dry. Occasional cleaning with a clean rag will
extend its life and good appearance.
Lock it up and store in a dry location to inhibit rust. Keep out of the reach of
children.
The Camera Switch Box has no replacement parts.
1.
2.
1.
2.
3.
4.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Bunker Hill Security 96105 Assembly And Operation Instructions Manual

Bunker Hill Security
Brand
Bunker Hill Security
Model
96105
Type
Assembly And Operation Instructions Manual

Bunker Hill Security 96105 is a 4-way digital camera switch box that allows you to connect up to four cameras to a single TV or monitor. It has a built-in speaker that allows you to hear the sounds made from the camera in operation, and a volume control so you can adjust the volume to your liking. The switch box also has a support stand so you can set it up at an angle for easy viewing.

Here are some of the possible use cases for the Bunker Hill Security 96105:

  • Monitor your home or business with multiple security cameras
  • Keep an eye on your children or pets while you're away
  • Use it as a baby monitor
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents