Morris MACI-10242 Instructions Manual

Brand: Morris

Model: MACI-10242

Type: Instructions Manual

Morris MACI-10242

Below you will find brief product information for Morris MACI-10242 air circulating fan. This device is intended for household use only and not for commercial, industrial, or outdoor use. The fan has a rated voltage of 220V 50Hz and a rated power of 28W. It comes with a remote control that allows you to operate the fan from a distance. The fan has four different modes: eco, normal, natural, and sleep. In eco mode, the fan speed automatically adjusts based on the surrounding room temperature. In normal mode, the fan operates at the set fan speed.

Morris MACI-10242

Air circulating fan

Instruction Manual

Model: MACI-10242

Please read this Instruction Manual before using the appliance.

Please keep the Instruction Manual in good condition for future reference.

Pictures of the product are for reference only.

Always refer to the actual product inside the package.

Safety Cautions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,

electric shock, and injury to persons, including the following:

1. To prevent fire or shock hazard, DO NOT expose this appliance to rain or moisture.

2. Dangerous high voltages are present inside this enclosure. To avoid electric shock, DO NOT open the cabinet.

Refer servicing to qualified personnel only.

3. This appliance is intended for household use only and not for commercial, industrial or outdoor use. Other use not

recommended may cause fire, electric shock or injury.

4. Do not plug or unplug the cord with wet hands.

5. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory

or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with

the appliance. Cleaning and user maintenance shall not be made by children without supervision.

6. Ensure the fan is not placed near drapes,curtains or any objects that may be drawn into the fan.

7. To protect against fire, electrical shock and injury to persons, do not immerse the unit, plug or cord in water or

spray it with liquids.

8. The appliance shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall

be placed on the product.

9. No naked flame sources - such as candles - should be placed on the product.

10. Ventilation should not be impeded by covering the ventilation openings. Slots and opening are provided for

ventilation to ensure reliable operation of the product and to protect it from overheating.

11. Care required with the use of this appliance in tropical climates. Do not use it to temperatures over 40 °C.

12. Place the fan on a stable level and dry surface when operating to avoid overturning.

13. Only connect to a suitable AC 220-240V~50Hz mains socket.

14. Do not operate the fan in the presence of explosive and / or flammable fumes. Do not place the fan or any parts

near an open flame, cooking or other heating appliance.

15. Do not operate the fan with a damaged cord or plug, after a malfunction or if it is dropped or damaged in any

manner.

16. Do not operate the fan without the fan grilles properly in place.

17. Do not place the fan close to an open window. Rain splashing on the fan could cause an electric shock hazard.

18. Do not let the power cord hang over the edge of a table or counter or let it touch any hot surfaces.

19. Do not insert or allow foreign objects to enter the grille openings as this may cause damage to the appliance.

20. Do not use the fan if grille becomes damaged or loose.

21. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

22. Children should be supervised to ensure that they do not play with the appliance.

23. Switch the fan OFF and unplug it from the outlet when it is not in use, when moving fan from one location to

another and before cleaning.

24. To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord.

25. Do not attempt to repair, disassemble or modify the appliance. There are no user-serviceable parts inside. Refer

all servicing to qualified service personnel.

26. If the supply cord is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified

persons in order to avoid a hazard.

27. Never wash out the whole unit. Putting this appliance close to fire is also prohibited.

WARNING! DO NOT use the fan in the following areas:

• Near an open flame, hot burner, oven or other source of high heat.

• On a soft surface (such as carpet) or where it may tip over during use.

• Outdoors or in areas of high humidity without suitable ventilation (such as in a bathroom, laundry area, near a

sink, washer, pool or any source of water.

• In a window or near curtains.

• In areas where paint, petrol, etc. is stored and there is a risk of explosion or fire from flammable gases, or in

areas

• Where substances are being sprayed.

PARTS:

6 4

Front View

1. Guard ring

2. Front grille

Fan stand

4. Fan speed control wheel

5. Control panel

6. Display screen

7. Base

Side View

8. Rear grille

9. Handle

10.

Remote control holder

11. Base

Product Specification

Usage cautions

● Ensure the fan is placed on stable and level position. Tilted or tipped over usage is prohibited.

● Disconnect the power cord before removing the appliance. Please pick up the handle located on the rear guard of

the fan to remove the product.

● Do not use the fan in high humidity environment or temperatures over 40℃ or dusty places.

● Keep electrical appliances out of reach from children or infirm persons. Do not let them use the appliances without

supervision.

● Never insert fingers, pencils or any other objects through the guards when the power plug is connected.

Operating Instructions

● Place the fan on stable and level position. After inserting the power cord plug into an electrical outlet, rotate the

knob switch to turn on the fan.

● Model NO.：MACI-10242

● Rated Voltage：220V 50Hz

● Rated Power：28W

● Net Weight：about 2.6kg

● Gross Weight：about 3.5kg

Control Panel

1. Vertical oscillation button

Horizontal oscillation button2.

3. Fan speed control wheel

4. Mode button

5. Timer button

32 4 5

Display Screen

1. Eco mode indicator

Normal mode indicator2.

3. Natural mode indicator

4. Sleep mode indicator

Real-time room temperature indicator

6. Degrees Celsius indicator

7. Hour indicator

8. Fan speed indicator

9. Vertical oscillation indicator

10.

Horizontal oscillation indicator

5 7

Vertical Oscillation Button

Activates the vertical oscillating function to ensure continuous air circulation. When active, the fan

head will turn slowly through 90° on its vertical axis and back again.

Horizontal Oscillation Button

Activates the horizontal oscillating function to ensure continuous air circulation.

When active, the fan head will turn slowly through 80° on its horizontal axis and back again.

Mode Button

Select between eco, normal, natural, and sleep modes.

•

Eco Mode:

The fan speed automatically adjusts based on the surrounding room temperature. Refer to the

below chart to see what fan speed corresponds to what temperature.

> 32°C 32-30°C 30-28°C 28-26°C

8 7 6 5

26-24°C 24-22°C 22-20°C < 20°C

4 3 2 1

•

Normal Mode:

The fan operates at the set fan speed.

Control Panel

Fan Speed Control Wheel

Turns the appliance on and off and controls the fan speed.

•

Natural Mode:

The fan operates in one of four natural wind modes depending on the set fan speed, to create

a natural air flow sense by changing the fan speed automatically as:

Natural Wind Mode One: Εvery 5 seconds increases speed from speed. # 2 to speed. # 5.

Natural Wind Mode Two: Every 5 seconds increases speed from speed. # 3 to speed. # 6.

Natural Wind Mode Three: Εvery 5 seconds increases speed from speed. # 4 to speed. # 7.

Natural Wind Mode Four: Εvery 5 seconds increases speed from speed. # 4 to speed. # 8.

•

Sleep Mode:

The fan operates as in Natural Mode, however, every half hour the set fan speed will

automatically reduce by 1 speed level. As the set fan speed reduces, the corresponding

Natural Wind Mode it is running at, i.e. one to four, will also change. The set fan speed will

continue to reduce until speed level 1 is reached. When at set fan speed 1 the fan will remain

operating in Natural Mode One.

Note: Fan speed can be changed freely on normal, natural and sleep mode but not on eco mode.

Timer Button

Set a turn-on and turn-off timer between 1 and 9 hours in 1 hour increments.

Setting a turn-on timer:

Ensure the appliance is plugged in and the power socket turned on.

2. Press the timer button to set the desired time (between 1 and 9 hours) until turn-on.

The hour digits will blink 5 times to confirm a timer has been set and the time until turn-on

will show on the display screen.

To cancel the turn-on timer set the time until turn-on to 0 hours or turn the appliance on

and off.

Note: The appliance will turn on utilising the chosen mode that was in place prior to it

previously being turned off. The fan speed will be set to 1 and cannot be adjusted when

setting a turn-on timer.

Setting a turn-off timer:

Ensure the appliance is plugged in and the power socket turned on.

2. Turn the appliance on.

Press the timer button to set the desired time (between 1 and 9 hours) until turn-off.

The hour digits will blink 5 times to confirm a turn-off timer has been set then the display

screen will revert to showing the room temperature. Note, the display will alternate between

showing the room temperature and time until turn-off at 5 second intervals.

Select the desired settings prior to turn-off.

To cancel the turn-off timer set the time until turn-off to 0 hours or turn the appliance off and

on.

1. Power button

2. Display on and offf button

Fan Mode button3.

4. Turn-on timer button

5. Turn-off timer button

6. Horizontal oscillation button

7. Vertical oscillation button

8. Mute button

9. Increase fan speed button

10.

Decrease fan speed button

Remote Control

Power Button

Turns the appliance on and off.

Display On And Off Button

Turns the display on and off.

Fan Mode Button

Select between eco, normal natural, and sleep modes.

Turn-On Timer

Set a turn-on timer between 1 and 9 hours in 1 hour increments.

Ensure the appliance is plugged in and the power socket turned on.

Press the turn-on timer button to set the desired time (between 1 and 9 hours) until turn-on.

The hour digits will blink 5 times to confirm a timer has been set and the time until turn-on will show on the

display screen.

4. To cancel the turn-on timer set the time until turn-on to 0 hours or turn the appliance on and off.

Note: The appliance will turn on utilising the chosen mode that was in place prior to it previously being

turned off. The fan speed will be set to 1 and cannot be adjusted when setting a turn-on timer.

Turn-Off Timer

Set a turn-off timer between 1 and 9 hours in 1 hour increments.

Ensure the appliance is plugged in and the power socket turned on.

2. Turn the appliance on.

3. Press the turn-off timer button to set the desired time (between 1 and 9 hours) until turn-off.

4. The hour digits will blink 5 times to confirm a turn-off timer has been set then the display screen will revert

to showing the room temperature. Note, the display will alternate between showing the room temperature

and time until turn-off at 5 second intervals.

5. Select the desired settings prior to turn-off.

6. To cancel the turn-off timer set the time until turn-off to 0 hours or turn the appliance off and on.

Horizontal Oscillation Button

Activates the horizontal oscillating function to ensure continuous air circulation.

When active, the fan head will turn slowly through 80° on its horizontal axis and back again.

Vertical Oscillation Button

Activates the vertical oscillating function to ensure continuous air circulation.

When active, the fan head will turn slowly through 90° on its vertical axis and back again.

Mute Button

Mutes the beeping sound made when choosing settings.

Increases the fan speed.

Decrease Fan Speed Button

Decreases the fan speed.

Increase speed Button

●

CLEANING AND MAINTENANCE:

To improve the effect of the wind, you are advised to clean the blades, front guard and rear guard monthly.

Before cleaning, please ensure the cord is unplugged and then operate as following:

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

1. Unscrew the screw of the rear guard in counterclockwise direction. (Figure 1)

2. Press the micro lock of the rear guard to get the front guard unlocked. (Figure 2）

3. Remove the front guard and clean it with soft cloth. (Figure 3)

4. Unscrew the cap nut of the blade in counterclockwise direction and remove the blade with caution. (Figure 4)

5. Clean the dust on the blades with soft cloth. (Figure 5)

When the cleaning is completed, you could re-install the appliance in an opposite order of the installing

procedures mentioned as above.

Maintenance

• Always turn off the fan and remove the plug from the socket-outlet before cleaning.

• Clean the external surfaces of the fan with a soft damp (not dripping wet) cloth.

WARNING:

Do not immerse the fan in water.

Do not use any cleaning chemicals such as detergents and abrasives.

Do not allow the interior (special for the PCB) to get wet as this could create a hazardous situation.

•

When the unit is not in use, make sure that it is unplugged from the wall socket. To store the fan, you may

pack it in the original carton and

store it in a cool and dry place until later use.

•

In case of malfunction or doubt, do not try to repair the fan yourself; it may result in a fire hazard or electric shock.

Cleaning

Turn off the appliance and unplug the power cord.

Remove the battery from the remote control.

Cover the appliance and all the accessories with a waterproof covering and store in a safe, dry place, out of the

reach of children.

Storage

For long-term storage:

NOTICE ABOUT RECYCLING

Your product is designed and manufactured with high quality materials and components

which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life,

should be disposed of separately from your household waste. Please dispose of this

equipment at your local community waste collection/ recycling centre.

In the European Union there are separate collection systems for used electrical and

electronic products.

Please help us to conserve the environment we live in!

DECLARATION OF CONFORMITY

Herewith, KALLIOPI KARIDA & CO., LP states that this product, complies with the requirements of below

directives:

EMC-Directive: 14 / 30 / EU

Low Voltage Directive: 14 / 35 / EU

CE Marking: 93 / 68 / EEC

RoHS Directive: 11 / 65 / EU & 15 / 863 / EU

The detailed declaration of conformity can be found at www.morris.gr

Exclusive importer in Greece:

KALLIOPI KARIDA & CO., LP

87A, 17

Noemvriou str, P.C. 55535

Thessaloniki – Greece

T: +302316006600 | F: +302316006650

www.morris.gr

Morris MACI-10242 Instructions Manual

Brand: Morris

Model: MACI-10242

Type: Instructions Manual

Morris MACI-10242

Download PDF

report

Morris MACI-10242 Instructions Manual

Morris MACI-10242 Instructions Manual

Related papers

Other documents