Page is loading ...
STAND FAN WITH OSCILLATION
MODEL NO: PM-F02-UK
INSTRUCTION MANUAL
SAFETY GUIDELINES
- Use the appliance only on the voltage specified.
- Do not plug in the appliance until it has been correctly assembled.
- Unplug the appliance before dismantling, moving or before cleaning.
- Do not use around heated surfaces, open flames or flammable substances.
- Do not immerse in water or other liquids. Do not use near water.
- Do not leave the appliance unattended around children.
- Do not insert any objects or fingers into any openings.
- Use for indoors only.
- Do not run the cord under throw rugs, runners, or similar coverings. Arrange
cord away from traffic area and where it will not be tripped over.
- Do not operate if there are signs of damage to the cord, plug or appliance. Do
not attempt to repair or adjust any electrical or mechanical functions on this
unit. Please Call Customer Service for assistance.
- Do not use the appliance for any other purpose than its intended use, as
described in the manual.
- Always ensure the appliance is placed on a flat, stable and suitable surface.
- Do not cover or restrict airflow to the inlet or outlet grills.
- Never unplug the appliance from the mains until it has been switched off.
- Unplug the fan and store in a dry, safe place when not in use.
SPECIFICATION
English | 1
- Power supply: 220 to 240V~50/60Hz
- Power Consumption: 50W [High Setting]
- Net Weight: 6.2 kg
- Dimensions: 46 x 41 x 135 CM
English | 2
ASSEMBLY
1.
Unpack the fan and remove all parts from the package.
2.
Assemble the foundation following the image sequence.
3.
Adjust the fan head to the up or down position, and then
tighten the fasten screw.
4.
Use the fasten nut for the back grill to attach to the fan head, and
then use the fasten nut for the fan leaf, to hold in place.
5.
Attach the front grill to the back grill, by using the grill ring carefully
to hold them together, and fasten the grill ring with the screw provided.
English | 3
COMPONENTS
1. Air Outlet
2. Adjustable Fan Head
3. Fan Blades
4. Control Panel
5. Adjustable Height
6. Base
7. Remote Control
1
2
3
4
5
6
7
Control Panel
English | 4
OPERATING INSTRUCTION FOR USE
Before using the fan make sure that it is on a flat and stable surface. Damage
may occur if it is placed on an incline or decline.
- Set all the switches to OFF position, then insert the plug directly into a standrd
AC socket-outlet. Be sure plug fits tightly into outlet.
- To turn on, press the “ ON/SPEED ” button on the control panel. The fan will
start at a low speed; by pressing this button again, you can adjust the speed
of the fan between three different levels of comfort: low, medium and high.
- Press the “MODE” button to choose from 3 different breeze patterns:
Normal - set Low, Medium or High
Natural - automatically selects wind speed randomly as you would find
out-doors.
Sleep - The wind speed of these three sleeping wind modes changes as below:
1. High sleeping wind: the air flows with high speed, then drops to medium
speed, and finally drops to low speed.
2. Medium sleeping wind: the air flow begins with medium speed and finally
drops to low speed.
3. Low sleeping wind: the air flows at a low natural wind speed, till the preset
time is reached or the fan is turned off.
- Press the “TIMER” button to activate the timer function. Each time the button
is pressed the timer will be increased by 0.5 hour up to a maximum of 7.5
hours.
- Press the “OSC” button to activate the oscillation function for widespread
breeze distribution. Press again to turn the oscillation function off.
- To completely shut the fan off, press the“ OFF” button to turn off the fan and
then remove plug from the socket-outlet
- Always disconnect the cord from the electrical outlet when cleaning your fan.
- Light accumulated dust may be removed from the fan with a soft cloth or
vacuum cleaner using the dusting brush attachment.
- Wipe the exterior surfaces of the fan occasionally with a cloth moistened (not
dripping wet) with a mild soap solution. Dry the case thoroughly with a soft dry
cloth before operating the fan.
- Avoid the use of gasoline, benzene, thinner etc as they may result in damage
to the fan.
- Store the fan in a clean dry place when not in use.
English | 5
CLEANING AND MAINTENANCE
CAUTION! Do not immerse the unit in water or allow water to drip into the
interior of the fan housing as this could create a fire or electric shock
hazard.
WARNING! Do not attempt to open or repair the unit yourself. Doing so
could void the warranty and cause damage or personal injury
ACCESSORY
Components for assembly, Remote Control, User Manual
At the end of the product life cycle, you should not throw this
machine into the normal household garbage but bring the product
to a collection point for the recycling of electrical and electronic
equipment.
DISPOSAL OF THIS DEVICE
/
