Cello C22113DVB-LED is an 85" Ultra High Definition LED TV with a plethora of features to enhance your home entertainment experience. It boasts a resolution of 3840 x 2160 pixels, delivering crystal-clear and detailed images. With its HDR10 support, you can enjoy a wider color gamut and higher contrast, resulting in more realistic and immersive visuals.
This TV offers a wide range of connectivity options, including three HDMI ports, two USB ports, and an Ethernet port. You can easily connect your gaming consoles, streaming devices, and other peripherals to enjoy your favorite content. The built-in digital tuner allows you to access terrestrial and cable channels without the need for an external set-top box.
LED TV
85
Contents
Unpacking the TV / Accessory’s
Installing / Removing the Base Stand
Front / Right Side View and Controls
Rear View and Sockets
OSD Menu
1
Installing Batteries in the Remote Control
. Picture Setting
2. Audio Setting
3. Lock Setting
4. Time Setting
Maintenance
1
2
3
4
12-17
11noitarepO cisaB
12
13
14-15
16
17
18
20
21
21
20
22
22-23
spiT dna stniH
24sedoM yalpsiD
25snoitacificepS
26-27sgninraW ytefaS
Remote Control
Making Video and Audio Connections
5-6
7
Remote Control Operation Range
7
8
Connecting an AV Device with an HDMI Cable
8
Connecting a Digital Audio Receiver
9
Turning the TV on for the First Time
10
5. Setup Setting
Connecting a USB Storage Device
Viewing Photos
Listening to Music
Watching Movies
Viewing Texts
Waste Electrical Recycling 28
your new 85" UHD LED TV.
1
Power Cable
(M4 x 22 8PCS)
The parts
Installation
2
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
(M4 x 22 8PCS)
M8 x 20
800
800
M4 x 22
4
Micro SD
TV Aerial
Digital
audio out
Android
USB
Android
USB
NETWORK
NETWORK
5
Remote Control
Go to DVBT source
Home for android system
Go to DVBS source
Extend battery life ,picture will
be dimmer.
Picture
Audio
Lock
Time
Setup
6
Remote Control
Turn the wireless mouse on/off
Searches all ATV and DTV channels
SMART
HDMI1
HDMI2
HDMI3
AV
USB
7
1/2/3
8
HDMI1 HDMI2
VIDEO L R
TV
USB
HDMI3
RL
AUDIO OU T
9
Micro SD
TV Aerial
Digital
audio out
Android
USB
Android
USB
NETWORK
10
5. First Time Installation
1. Make sure your TV is plugged in and that the aerial lead is connected
to the TV aerial socket.
2. Turn on the TV by pressing the key on the remote control or
by pressing the standby button on the TV.
3. Run the Aurora TV and follow the steps as below.
Available Tuners
Verify that your tuners have been detected
Next
Refresh
Internal
DVB-T/T2/C
Terrestrial
Select tuner
Disabled
Skip
Welcome
The following wizard will help you setup your Aurora Digital TV client
Next
Terrestrial
Select Tuner
Disabled
Internal
DVB-T/T2/C
Terrestrial
Select tuner
Disabled
Next
Search Filter
Only free channels
Region
United Kingdom
Ukraine
United Arab Emirates
United States
United States Minor Outlying Islands
United States Virgin Islands
Uruguay
HDMI1 HDMI2
VIDEO L R
TV
USB
HDMI3
TV Aerial
Digital
audio out
NETWORK
11
20
SMART,HDMI1,HDMI2,HDMI3,AV,USB
Mut e Mute
LOCK
Radio
/
Input Source
SMART
HDMI1
HDMI2
HDMI3
AV
USB
OK OK
12
Personal / Theater
Normal / Personal /
O / Weak / Middle / Strong
Point to Point
MENU
MENU
MENU
Menu
13
Sports Menu
Menu
Auto Volume This feature automatically adjusts the audio level when the TV is turned on.This function is activated by selecting”ON”.
Surround Sound
Turn on/off the surround sound function by selecting “On” or “Off”.
AUDIO
Digital Output
Digital Output
Personal
Audio
14
Lock Setting
Lock
System Lock
System Lock
Change Password: If you had already changed the password,enter the current password.
Lock Setting
Hotel Mode
Press the up/down buttons to select the “Hotel Mode”
option and then press OK button to choose between
the options ON or OFF.
Power on Source
Press up/down buttons to select the “Default Source” option and then press right button to choose a signal
source or OFF.This function lets you set the signal source(SMART//HDMI1/HDMI2/HDMI3/AV/USB)
to be used when powering on the unit.It will be used until you select a different signal source or disable
this function(OFF).
Max Volume
Press up/down buttons to select the “Max Volume” option and then press left/right button to set the desired
volume.
Then the output volume will never exceed the set maximumvalue.
Power on Volume
Press up/down buttons to select the “Power on Volume” option and then press right button to set the default
volume.
Clear All
Press up/down buttons to select the “Clear All” option and then press right button to anable it.Allhotel settings
will remain disabled until you enable the Hotel Lock again.
15
Time Setting
Time
Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed.The clock
will be set automatically when receiving a digital signal.Time must be set before using Sleep Timer function.
Press up/down buttons to select a period of time after which the TV automatically switches to standby mode:
OFF/5/10/.../180/240 min and then press the OK button to confirm.The timer begains to count down from
the number of minutes selected.
16
Setup Setting
Setup
MENU Language
Allows you to select the on screen display menu language.
Restore Default
Home Mode
Allow you to select among:Max Brightness mode Home mode and Max Economy mode.
17