Cello C75ANSMT-4K V4 User guide

Brand: Cello

Model: C75ANSMT-4K V4

Type: User guide

Cello C75ANSMT-4K V4 is a 75" UHD LED TV with a 3000:1 contrast ratio and a 200Hz refresh rate allowing for a crisp and clear picture even during fast-paced scenes. It features built-in speakers with a total output of 10W + 10W providing immersive sound, and supports various input sources including HDMI, USB, and AV, enabling you to connect a wide range of devices such as gaming consoles, streaming sticks, and DVD players. Additionally, it has a built-in digital tuner for receiving over-the-air broadcasts.

LED TV

Contents

Unpacking the TV / Accessory’s

Installing / Removing the Base Stand

Front / Right Side View and Controls

Rear View and Sockets

OSD Menu

Installing Batteries in the Remote Control

. Picture Setting

2. Audio Setting

3. Lock Setting

4. Time Setting

Maintenance

12-17

11noitarepO cisaB

14-15

22-23

spiT dna stniH

24sedoM yalpsiD

25snoitacificepS

26-27sgninraW ytefaS

Remote Control

Making Video and Audio Connections

5-6

Remote Control Operation Range

Connecting an AV Device with an HDMI Cable

Connecting a Digital Audio Receiver

Turning the TV on for the First Time

5. Setup Setting

Connecting a USB Storage Device

Viewing Photos

Listening to Music

Watching Movies

Viewing Texts

Waste Electrical Recycling 28

your new 75" UHD LED TV.

Power Cable

(M5 x 20 6PCS)

The parts

Installation

Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.

(M5 x 20 6PCS)

400 x 200 mm

1.Attach the stand feet in the positions shown

and secure them with supplied screws (M5 x 20)

SMART/HDMI1/HDMI2/HDMI3/AV/USB

Network

Android USB

Micro SD

Connect the TV to the Internet

Allows the USB storage device to play video,audio,photo and text files in SMART

mode,and works with air mouse .

Load external Micro SD memry card.

Connect an external device to the composite VIDEO(Y) and AUDIO (L / R) out jacks

found on most video equipment.

Audio Out Connect to audio receiver.

USB

HDMI1 HDMI2

VIDEO L R

HDMI3

AUDIO OUT

Micro SD

TV Aerial

Digital

audio out

Android

USB

Android

USB

NETWORK

Remote Control

Go to DVBT source

Home for android system

Go to DVBS source

Extend battery life ,picture will

be dimmer.

Picture

Audio

Lock

Time

Setup

Remote Control

Turn the wireless mouse on/off

Searches all ATV and DTV channels

SMART

HDMI1

HDMI2

HDMI3

USB

1/2/3

HDMI1 HDMI2

VIDEO L R

USB

HDMI3

AUDIO OUT

Micro SD

TV Aerial

Digital

audio out

Android

USB

Android

USB

NETWORK

5. First Time Installation

1. Make sure your TV is plugged in and that the aerial lead is connected

to the TV aerial socket.

2. Turn on the TV by pressing the key on the remote control or

by pressing the standby button on the TV.

3. Run the Aurora TV and follow the steps as below.

Available Tuners

Verify that your tuners have been detected

Refresh

Internal

DVB-T/T2/C

Terrestrial

Select tuner

Disabled

Skip

Welcome

The following wizard will help you setup your Aurora Digital TV client

Terrestrial

Select Tuner

Disabled

Internal

DVB-T/T2/C

Terrestrial

Select tuner

Disabled

Search Filter

Only free channels

Region

United Kingdom

Ukraine

United Arab Emirates

United States

United States Minor Outlying Islands

United States Virgin Islands

Uruguay

AUDIO OUT

HDMI1 HDMI2

VIDEO L R

USB

HDMI3

TV Aerial

Digital

audio out

NETWORK

SMART,HDMI1,HDMI2,HDMI3,AV,USB

Mut e Mute

LOCK

Radio

Input Source

SMART

HDMI1

HDMI2

HDMI3

USB

OK OK

Personal / Theater

Normal / Personal /

O / Weak / Middle / Strong

Point to Point

Sports Menu

Auto Volume This feature automatically adjusts the audio level when the TV is turned on.This function is activated by selecting”ON”.

Surround Sound

Turn on/off the surround sound function by selecting “On” or “Off”.

AUDIO

Digital Output

Personal

Audio

Lock Setting

Lock

System Lock

Change Password: If you had already changed the password,enter the current password.

Lock Setting

Hotel Mode

Press the up/down buttons to select the “Hotel Mode”

option and then press OK button to choose between

the options ON or OFF.

Power on Source

Press up/down buttons to select the “Default Source” option and then press right button to choose a signal

source or OFF.This function lets you set the signal source(SMART//HDMI1/HDMI2/HDMI3/AV/USB)

to be used when powering on the unit.It will be used until you select a different signal source or disable

this function(OFF).

Max Volume

Press up/down buttons to select the “Max Volume” option and then press left/right button to set the desired

volume.

Then the output volume will never exceed the set maximumvalue.

Power on Volume

Press up/down buttons to select the “Power on Volume” option and then press right button to set the default

volume.

Clear All

Press up/down buttons to select the “Clear All” option and then press right button to anable it.Allhotel settings

will remain disabled until you enable the Hotel Lock again.

Time Setting

Time

Sleep Timer

The sleep timer automatically switches the TV to standby after the preset time has elapsed.The clock

will be set automatically when receiving a digital signal.Time must be set before using Sleep Timer function.

Press up/down buttons to select a period of time after which the TV automatically switches to standby mode:

OFF/5/10/.../180/240 min and then press the OK button to confirm.The timer begains to count down from

the number of minutes selected.

Setup Setting

Setup

MENU Language

Allows you to select the on screen display menu language.

Restore Default

Home Mode

Allow you to select among:Max Brightness mode Home mode and Max Economy mode.

Page is loading ...

Cello C75ANSMT-4K V4 User guide

Cello C75ANSMT-4K V4 User guide

Cello C75ANSMT-4K V4 User guide

Related papers