Liesegang ddv 2300 User manual

Brand: Liesegang

Model: ddv 2300

Category: Data projectors

Type: User manual

Liesegang ddv 2300 is a high resolution video projector that uses DLP technology. It can be used for a variety of purposes, including business presentations, home theater, and gaming.

Some of the key features of the Liesegang ddv 2300 include:

High resolution: The Liesegang ddv 2300 has a native resolution of XGA (1024x768), which is suitable for displaying sharp and clear images.
Convenient presentation design: The projector has a number of features that make it easy to use for presentations, such as auto source selection, easy keystone correction, and auto image optimization.
Multilanguage OSD menu support: The projector's on-screen display menu is available in 7 languages, making it easy to use for users of all nationalities.

Liesegang ddv 2300 is a high resolution video projector that uses DLP technology. It can be used for a variety of purposes, including business presentations, home theater, and gaming.

Some of the key features of the Liesegang ddv 2300 include:

High resolution: The Liesegang ddv 2300 has a native resolution of XGA (1024x768), which is suitable for displaying sharp and clear images.
Convenient presentation design: The projector has a number of features that make it easy to use for presentations, such as auto source selection, easy keystone correction, and auto image optimization.
Multilanguage OSD menu support: The projector's on-screen display menu is available in 7 languages, making it easy to use for users of all nationalities.

USER’S Manual

ddv 2300

Notice

The information in this user’s Manual’s subject to change without notice.

THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR

ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL

NOTBE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY

RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL.

The information in this user’s Manual’s protected by copyright laws. No

part of this manual may be photocopied or reproduced in any form without

prior written authorization from the copyright owners.

Product names mentioned herein may be trademarks and/or registered trademarks of their

respective owners/companies.

iii

TABLE OF CONTENTS

PREFACE

Protecting Your Projector

- Avoid Abusive Handling and Adverse Environment

Symbols

1. GETTING TO KNOW THE BASICS

Performance Features (1-2,3)

Supplied Accessories (1-3)

System at a Glance (1-4)

Front View (1-4)

Top View (1-5,6)

Rear View (1-7,8)

Right-Side View (1-8)

Left-Side View (1-9)

Bottom View (1-9)

Control Panel and Remote Control (1-10,11,12)

Control Panel (1-10)

Remote Control (1-11,12)

Remote Instruction Operating Range (1-13)

Projector Operation (1-13,14,15,16,17,18)

Setting Up Procedure (1-13)

Connecting Projector to Equipment (1-14,15,16)

Starting the Presentation (1-16,17)

Ceiling Mount Projection Setting Procedure (1-18)

2. ON SCREEN DISPLAY MENU DESCRIPTION

Status Signals (2-2,3)

OSD Menu (2-3)

Adjust Menu (2-4,5)

Setup Menu (2-6,7)

Color Management Menu (2-8)

Language Menu (2-9)

Utility Menu (2-10)

Status Menu (2-11)

3. CLEANING, MAINTENANCE AND TROUBLESHOOTING

Cleaning (3-2)

Clean The Lens (3-2)

Clean Exterior Case (3-2)

Maintenance (3-3)

Lamp Replacement (3-3,4)

Resetting the Lamp (3-5)

Troubleshooting (3-6)

Image Problems (3-7,8,9)

Lamp Problems (3-9)

Other Problems (3-10)

LED Indicator Error Messages (3-10)

Appendix A REFERENCE

Product Specification (A-2)

Projection Distance V.S. Projection Size (A-3)

Present Timing (A-4)

Appendix B AGENCY REGULATORY NOTICES

Federal Communications Commission Notice (B-2)

Compliance Information For Canada (B-3)

User Information for all Countries (B-3)

Preface

Using This Manual

This User’s Manual contains general information about your projector,

hardware installation and OSD setting information, troubleshooting, and

technical specifications.

Protecting Your Projector

- Avoid Abusive Handling and Adverse Environment

Follow the advice below will help ensure that you get the most out of your

Investment.

Your projector will serve you well if you take good care of it.

 Do not expose the projector to direct sunlight or place it near

sources of heat.

 Do not subject it to temperatures below 10

C or above 35

 Do not expose the projector to magnetic fields.

 Do not expose the projector to moisture or rain.

 Do not spill water or liquid on the projector.

 Do not subject the appliance to adverse shock and vibration.

 Do not place the appliance to areas susceptible to excessive

dust, dirt, and smoke.

 Do not place objects on top of this product to avoid damaging it.

 Do not block the ventilation slots.

 Do not place the projector on rocky surfaces, unstable table or

shaky stand.

 Do keep the fan running for a few minutes cooling, before

powering off the product.

 Do disconnect the power plug from AC outlet if the projector

won’t be able to use for a while.

 Do operate your projector without the lamp module or lamp

module door.

Complying with safety instructions will keep you away from fire,

electric shock, bodily injury or property damage.

 To reduce the risk of causing electric shock, fire or property

damage:

 Do not assemble the projector.

If the service or repair is required, Please take it to the

customer service center nearby you.

 Do not expose the appliance to rain or moisture.

 Do not replace lamp assembly or any electronic

components unless the projector is unplugged.

 To reduce the bodily harm:



Do not stare directly into the lens as possible eye injury

could occur since this projector produce intense light from

the projection lens. Be especially careful that children do

not look into the beam directly.

When cleaning the projector, observe these steps:

1. Switch off the projector and disconnect the power plug from AC

outlet.

2. Use a soft cloth dampened with mild detergent to clean the

housing. Do not use liquid or aerosol cleaners.

Contact your dealer or see your service technician if any of the

following occurs:

 Projector has been dropped or the body has been d

 amaged.

 Liquid has been spilled into the product.

 The projector does not operate normally.

Symbols

This manual contained have been categorized in accordance with

seriousness of potential hazards through the icons. Each of the icons

represents its own meaning as below.

Note:

Warning:

Note:

Text in this format and symbol

means specific instructions,

commentary, sidelights, or any

additional information or notes

that you should be aware of.

Warning:

Text is this format and symbol

means that failures to comply

with the given instructions or

information could result in

damage to your projector or

could cause bodily harm or

loss of life.

GETTING TO KNOW THE BASICS

GETTING TO KNOW

THE BASICS

This section introduces the features and

components of the DLP Projector.

USER’S MANUAL

1-2

Performance Features

 High Resolution

By using advanced video “Digital Light

Processing” technology, it is fully compatible

with true XGA and supports SXGA. This lets

you display your clear compression images

without line omission.

 Convenient Presentation Design

With this feature, you won’t have to stand next

to your computer or give hand signal to your

partner when you require changing slides. You

can fully focus on connecting and

communicating with your audience, not with

your computer while giving presentations.

 Auto Source Selection

The projector will auto detect display signal

source from any attached equipment such as

computing system and video appliances.

 Easy Keystone Correction

If the projection position is set to the height of

line of vision, there won’t be any keystone

issue. On the contrary, when projecting above

or under the height of line of vision, image

distortion might occur. The distortion is easy

to be adjusted by using the keystone

correction.

 Auto Image Optimization

The projector will automatically optimize the

parameters and present a good image quality

adapted to the new circumstance.

GETTING TO KNOW THE BASICS

 Multilanguage OSD Menu Support

The On Screen Display Menu in 7 languages

provides users with informative data to aid

users to re-set the parameters while operated

in their own native language.

Supplied Accessories

Make sure that all of the following accessories are

included in the package besides the projection unit. If

anything is missing, please contact your dealer

immediately.

Power Cord Computer Cable: M1-DA

Audio Cable S-Video Cable

Remote Controller Batteries (2x “AAA”)

Quick Start Guide CD-Wizard (User’s Guide)

Lens Cap Carrying Case

Note:

Please keep the

original packing

material for future

shipment.

USER’S MANUAL

1-4

System at a Glance

Front View

1. Projection Lens

This is where the beam of light projected.

2. Ventilation Grills

The fan grills are where air is exchanged in and out

of the projector for internal thermal regulation.

Restricting the airflow can cause it to overheat and

turn off. If this happens, you must wait for a couple

of minutes before attempting to turn it back on.

3. Adjusting Feet

The projector is equipped with 2 adjuster feet.

Push the adjusters to adjust its tilt angle.

1) Life the projector up and press the adjuster

button to release the adjuster.

2) The adjuster will drop into position and be

locked.

4. Remote Control Sensor

This is where the remote control signal received.

Warning:

Do not stare directly

into the lens as

ossible eye injury

could occur since

this projector

roduce intense

light from the

rojection lens. Be

especially careful

that children do not

look into the beam

directly.

Illustration 1-1

GETTING TO KNOW THE BASICS

Top View

1. Focus Ring

2. Zoom Ring

3. Remote Control Sensors

For convenience, this projector had built-in two IR

receivers. You may remote the projector not only

in front of but also in the rear of it.

4. Built-in Speaker

The built-in 3W speaker output the sound.

5. Control Panel

For more details, please go to page 10 “Control

Panel”.

6. Power LED

The Power LED to indicate the system-ON status of

Note:

Before powering

off the product,

lease keep the

cooling fan

running for a few

minutes.

Warning:

Do not place any

objects on the

top of projector.

That may

damage the

rojector.

Illustration 1-2

USER’S MANUAL

1-6

the projector. (See “LED Status Indicator” later in

this section for details.)

7. Lamp Ready LED

8. 4-Directional Keypads

9. Menu Button

It will activate the menu system on screen.

Press Menu again to enter the sub-menus. The

4-directional keypads help you navigate among

choices.

However, when the on-screen menu is not

activated, the

(Left and Right) buttons will

function as Volume +/- hot keys.

10. Power/Suspend Button

The power/suspend button turns the projector on

and off and it also acts as a system suspend key.

This projector uses a one-button design. Press

momentarily to turn on the system. Press and hold

for at least 3~4 seconds or press twice continuously

to turn off the system. Press the power/suspend

button to return from the suspend mode. (For

detailed instructions, refer to page 10.)

11. Source Button

Using the button to select signal sources from

among PC, Video and S-video.

12. Auto Button

This will automatically determines the best Picture

settings for current received signals.

13. Keystone Button

When the projected image is noticeable wider at

either top or bottom. To correct this, just press

this “Keystone” button either on the control panel of

projector or the remote control.

GETTING TO KNOW THE BASICS

Rear View

1. RS-232 Port

2. Audio-Out Socket

The socket is for connecting external speakers or a

public-address system. It is also able to control

the volume via you IR remote control.

3. Audio-In Socket

This socket accepts sound from a computer or

video source.

4. Video-In Jack

The video jack is where you join the video

appliance output, such as video recorder and VCD

player.

5. M1 Port

This is where you connect the cable “M1-DA”. To

project the image, you need to connect the cable to

the D-sub port of your computing system. To

enable the presenter feature, you need to attach the

USB mouse cable from PC to projector. (For

details, please go to page 14)

6. S-Video Jack

This jack is where you join video equipment with

s-video signal, such as DVD player.

Illustration 1-3

USER’S MANUAL

1-8

7. Screen Trigger Port

This is where you connect your screen remote

device if your screen supports the function. If this

function has been enabled, the screen will scroll

down automatically after activating your projector.

(For details, please refer to page 14)

Right-Side View

1. Ventilation Grill

The fan grill is where air is drawn to dissipate the

internal heat. Do not block this airway completely.

2. Kensington Lock Key Hole

A Kensington-type security lock latches to this

keyhole for anti-theft purpose.

3. Power Jack (AC-in)

The AC-in jack of the power cord connects here

and powers the projector.

4. Adjuster Button

The adjuster is where to adjust the height of

projection image.

5. Adjuster Foot

The projector is equipped with 2 adjuster feet.

Push the adjusters to adjust its tilt angle. Life the

projector up and press the adjuster button to

release the adjuster. The adjuster will drop into

position and be locked.

6. Projection Lens

This is where the beam of light projected.

Warning:

Do not block this

grills for dissipate

the internal heat.

Illustration 1-4

GETTING TO KNOW THE BASICS

Left-Side View

1. Adjuster Button

The foot adjuster is where to adjust the height of

projection image.

2. Adjuster Foot

The projector is equipped with 2 adjuster feet.

Push the adjusters to adjust its tilt angle. Life the

projector up and press the adjuster button to

release the adjuster. The adjuster will drop into

position and be locked.

Bottom View

1. Lamp Cover Latch

Pull on the latch to release the cover.

2. Lamp Module Cover

Projection lamp resides underneath the cover. Do

not open the cover.

3. Ceiling Mounting Holes

If you required having your projector mounted, here

shows you the position to place your ceiling mount.

For details, refer to “Ceiling Mount Installation”.

Warning:

Do not replace

lamp assembly

unless the

rojector is

unplugged.

Illustration 1-5

Illustration 1-

USER’S MANUAL

1-10

Control Panel and Remote Control

Control Panel

Keypad Definition

Power To switch power on or off

Source Source selection

Auto Auto image

Keystone Keystone adjustment selection

To enter or exit menu

▲

OSD item up-toward selection

▼

OSD item down-toward selection

►

1. OSD menu right-toward selection

2. Parameter setting increment

3. Hot key for volume up

◄

1. OSD menu left-toward selection

2. Parameter setting decrement

3. Hot key for volume down

LED Status Indicators

The LED Status Indicator displays the operating status

of your projector.

Status Power LED

Symptom

Lamp LED

Symptom

Plug in power cord Steady light Steady light

Power on without source Blink Light off

Power on with active source Steady light Light off

Power off in cooling stage Fast flash light Light off

System warming up Flash light Light off

Note:

It takes 60sec for

lamp to cool

down.

Note:

OSD Menus:

djust, Setup,

ColorMgr,

Language, Utility,

Status.

Illustration 1-7

GETTING TO KNOW THE BASICS

Remote Control

Remote Instruction

The optimum range of operation for the remote control is

less than or equal to 33 feet (10m). Install AAA battery

x2 into the remote.

Remote Mouse Function

This function will assist you to change your slide

without giving hand signal to your colleague while

presenting to your customers. To activate this

function, simply attach the USB side on the M1

cable to your computer.

OSD Menu Function

• Press “Menu” to enter OSD menu.

• Up/down arrow of the cursor key will be same

as/ showed in the OSD menu.

• Left / right arrow of the cursor key will be same as

- / + function.

• Press “Menu” again to exit OSD menu.

Power Key

This is the button to switch power on or off.

Warning:

To reduce the

risk of injury to

the eyes, do not

look directly into

the laser light

emitted from the

aperture on the

Remote Control

and do not point

the laser light into

anyone’s eyes.

This remote

control is

equipped with a

Class IIIA laser

that emits

radiation.

Note:

Do not leave the

remote control

close to the

cooling fan outlet

of the projector.

Laser Pointer

Mouse

Keypads

(

Control Panel

)

Illustration 1-8

USER’S MANUAL

1-12

Laser Key

Take this red key is used as regular laser pointer function

while giving presentations.

Zoom In/Out Hotkey

• Press “Zoom+”, the center of the picture will be

magnified. Press “Zoom-”, the size of the image

will be reduced.

• Press “Menu” to return to normal display mode.

Mute Hotkey

• Press “Mute” to turn on the speaker.

• Use “Mute” to turn off the speaker.

Blank Hotkey

• Press “Blank” is not only to blank the image but

also mute the audio function.

• Press “Blank“ again to disable the function.

Freeze Hotkey

• Press “Freeze” to freeze the image.

• The “Freeze” icon will appear in the lower right

corner of the screen for few seconds.

• Press “Freeze” again to unfreeze the image.

Keystone Hotkey

• Press “Keystone ” enable the

keystone adjustment

selection.

• Press “Menu” to exit.

Volume Hotkey

• Press “Volume” enable the volume adjustment.

• Press “Menu” to exit.

GETTING TO KNOW THE BASICS

Remote Instruction Operating Range

The remote control can be used to control the

projector within the range shown as following

illustration.

Projector Operation

Setting Up Procedure

1. Place the projector on a flat surface.

2. Position the projector the desired distance from

your screen.

3. Plug on the power cable.

When you connect the power cable to the projector,

the Power LED & Lamp Ready LED on the keypad

will be turned on to green steady light in normal

status.

Note:

The signal from the

remote control can

be reflected off a

screen for easy

operation. The

maximum remote

distance is about

10M which

including the

reflected distance.

However, the

effective distance of

the signal may diffe

due to the screen

material.

Illustration 1-9

USER’S MANUAL

1-14

Connecting Projector to Various Equipments

It takes a few seconds to connect your projector to your

PC or laptop, VCR and so on.

Connecting Projector to Your Laptop or Desktop

Connecting Projector to Your Screen

Note:

lways turn off

the image source

(computer or

video) and

rojector before

connecting or

disconnecting

cable.

M1-DA

USB

Mouse

RGB

Illustration 1-10

Trigger

12VDC

0.1Amax

Illustration 1-11

Page is loading ...

Liesegang ddv 2300 User manual

Brand: Liesegang

Model: ddv 2300

Category: Data projectors

Type: User manual

Liesegang ddv 2300 is a high resolution video projector that uses DLP technology. It can be used for a variety of purposes, including business presentations, home theater, and gaming.

Some of the key features of the Liesegang ddv 2300 include:

High resolution: The Liesegang ddv 2300 has a native resolution of XGA (1024x768), which is suitable for displaying sharp and clear images.
Convenient presentation design: The projector has a number of features that make it easy to use for presentations, such as auto source selection, easy keystone correction, and auto image optimization.
Multilanguage OSD menu support: The projector's on-screen display menu is available in 7 languages, making it easy to use for users of all nationalities.

Download PDF

report

Liesegang ddv 2300 User manual

Liesegang ddv 2300 User manual

Related papers

Other documents